The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools Search this Thread
Old November 21, 2020, 09:39 PM   #26
USSR
Senior Member
 
Join Date: November 14, 2017
Location: Finger Lakes Region of NY
Posts: 1,168
He's saying use .357 Mag brass in your .357 revolver instead of .38 Specials.

Don
__________________
NRA Life Member
NRA Certified Metallic Cartridge Reloading Instructor
USSR is offline  
Old November 21, 2020, 09:42 PM   #27
USSR
Senior Member
 
Join Date: November 14, 2017
Location: Finger Lakes Region of NY
Posts: 1,168
Quote:
The outdoor range I go to is 80 miles away and costs $18 all day. I get free lead there too. The other closest range is 37 miles away and costs $30 for 3 hours. No free lead.
Yikes! Guess I'm spoiled having my own pistol range outside my house.

Don
__________________
NRA Life Member
NRA Certified Metallic Cartridge Reloading Instructor
USSR is offline  
Old November 21, 2020, 10:14 PM   #28
stinkeypete
Senior Member
 
Join Date: July 22, 2010
Location: Madison, Wisconsin
Posts: 673
When I had a pair of Vaqueros I spent a serious amount of time working up accuracy loads. For my guns, I was able to get better groups crimping on a lube groove such that the COL was more like a semi wadcutter and used light target loads of Bullseye in .357 cases. I reckon that the jump to the forcing cone was more of an effect than restricting case volume for my two guns.

The fellas at the range laughed at my “silly looking” long seated wadcutters until they saw how they grouped. You can’t argue with a tight group like that. It took a summer of fiddling to get tuned in. The fellas were in our club level bullseye league and showing up with a pair of vaqueros was a bit of fun as I had a custom bullseye 1911 as my “usual”.

Then I started wondering where all of this deep seating lore came from. I was stumped until I learned about the Smith and Wesson Model 52 that is widely reported to have other-worldly accuracy. Legendary tack driving accuracy- it’s a semi auto that shoots .38 special. Because of dimensions, the cartridge can be no longer than the .38 case. So... S&W sold factory ammo for it and it too was of legendary tack driving accuracy.

I felt no danger in increasing case volume, pressure can only go down until you are beyond plunk test length. For a pair of my single actions, my groups shrank significantly. Your mileage may vary!

Granted, accuracy from the Vaqueros never approached what I hear a good S&W target .38 revolver can do, but going long more than halved my group sizes. Theory is good, learning what works for others is good, but different guns are different when it gets down to the complicated details of bench rested accuracy.
__________________
I hunt, shoot bullseye, plink, reload, and tinker with firearms. I have hung out with the Cowboy Action fellas. I have no interest in carrying firearms in urban areas.

Last edited by stinkeypete; November 21, 2020 at 10:23 PM.
stinkeypete is offline  
Old November 22, 2020, 08:11 PM   #29
RC20
Senior Member
 
Join Date: April 10, 2008
Location: Alaska
Posts: 6,310
Back in the day I shot a Police Practical course with wad-cutters (supplied by the police)

Flush, no idea if the academy loaded them or the bought them.

Wicked accurate. Memory a bit vague, staff was 20-25 who were there so they could shoot (not the highest recommendation for instructors in other parts of the police work!) Big competition between the RMCP and the Troopers (at least in those days)

I think I came in 4th vs the staff (they had a score board up for the staff, don't remember if it was high score or an average). I only shot the course once so I could have dropped down.

Flip was first time (also last) I shot the course and you had to figure out how to deal with speed loaders vs loose ammo and at what point to hand load and what point to use the Speedloaders.

Plus was N frame 357 shooting woodcutters so more like a 22 target. Brand new guns so no getting sandbagged with a worn out dog.

I did get some odd looks and the scorer checked my score so many times I thought I had screwed something up (he just shook his head and told me to go look at the board)

But having come off a years of shooting 41 mag in an N Frame it was a sweet shooting combo.

That said they were seated flush so the 357 length was not accommodated

Now I think they shoot with full rounds for the practice like you would have to use it which makes sense.
__________________
Science and Facts are True whether you believe it or not
RC20 is online now  
Old November 23, 2020, 04:27 PM   #30
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 18,078
The light loads were good for avoiding developing a flinch back in police revolver days. But the modern police sidearms are self-loaders, and many would need to have their springs changed and feed ramps radiused and polished to work with light, blunt nose loads. Not many trainers want that much extra work.
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Benefactor Member and Golden Eagle
Unclenick is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:55 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2020 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05766 seconds with 10 queries