The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools Search this Thread
Old November 22, 2019, 06:19 PM   #1
TheCanuckCowboy
Junior Member
 
Join Date: November 17, 2019
Posts: 5
Rem 700 xcr flaking Finnish and colour change

Hello everyone! I want to ask everyone’s opinion on my 2012 rem 700 xcr in .223 I’ve only had it a short while having bought it used, after cleaning it up I’ve noticed a strange speckling/flaking of the Finnish down to the bare stainless on the inside bolt channel (sorry for improper terms) near the chamber, and even more curious the entire inside of the action is a iridescent rainbow effect on the Finnish?? haha unfortunately I can add pictures right now as I am writing from my phone. But any advice on what would cause the flaking and change of colour would be appreciated, I’m stumped! Thanks in advance
TheCanuckCowboy is offline  
Old November 24, 2019, 02:29 PM   #2
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 16,957
Your phone's auto-spell correction is messing with you. A "finish" is a coating, while "Finnish" are people from Finland. I hate those automatic correctors in Android and constantly have to go back and replace what it has decided, incorrectly, is what I meant to write.

A flaking or peeling finish is usually a sign of inadequate metal preparation for the finish. If it confines itself to inside the bolt, you are probably fine, as that can't be seen when the gun is assembled and in most guns is meant to be an unfinished area so the bolt operates freely and smoothly (though I don't know your particular gun).
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Benefactor Member and Golden Eagle
Unclenick is offline  
Old November 25, 2019, 05:11 PM   #3
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 13,886
The easiest option is to take the rifle to a gunsmith that does GunKote application, pay the $200 and you are done. If you are very skilled and have access to bead blasting equipment and a good shop, you could use Brownells' Aluma-Hyde, it comes in a variety of colors.

As far as what caused it, the usual answer is "poor care".
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Old November 30, 2019, 01:31 PM   #4
mxsailor803
Senior Member
 
Join Date: February 8, 2010
Location: Norfolk, Va
Posts: 1,243
Scorch said exactly what I would do. It sucks that you’re going to have to do it but a capable smith will make sure you never have any other issues with it.
mxsailor803 is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:32 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.04293 seconds with 10 queries