Smith and Wesson serial number search - Page 36

BLK08ROCKERC · January 12, 2009, 09:07 AM

That 686-5 is a 2000 model.

Joe R · January 12, 2009, 05:39 PM

Thanks for the info on the S&W, I appreciate it.

Joe

laytonj1 · January 12, 2009, 09:13 PM

Quote:

When I open the cylinder there is a 10-6 number and on the butt of the gun the Serial # C659xxx

Also I've seen some really nice aftermarket grips (hogue/pachmayr) that I might want to add. What size frame do I have? I think K but I'm not 100%

1963/64 and it's a "K" frame. As for the finish... ?????

Quote:

so i have an old smith and wesson with the serial # of 13085 with a star after the numbers, on the barrel it says 44 special CTG and the other side of the barrel has a bunch of patent #s. the gun is nikel. from everything ive seen reaserching online i think it is a triple lock but im not sure.

Pixs help, but the serial number and caliber would make it a .44 Hand Ejector 1st Model (Triple Lock) made in 1913. The "star" suffix indicates it went back to the factory for repair and/or refinish.

Jim

spddrcr · January 12, 2009, 09:23 PM

thanks jim, i had found awhile ago that it went back due to the star designation. will smith and wesson clean it upo again if i asked them? im not really interested in selling the gun but would love for it to look a little better so i can frame it and hang it on the wall. the gun has quite the history so im told by the person who gave it to me

gwnorth23 · January 12, 2009, 09:28 PM

Thanks for the info!

laytonj1 · January 12, 2009, 09:29 PM

Quote:

will smith and wesson clean it upo again if i asked them?

That old, I doubt it. But you could still call and ask. Unless the finish is pretty bad I would not mess with it.
BTW, S&W stopped using the star designation for factory refinish/rework back in the 50's/early 60's.

Jim

DoomMonky · January 13, 2009, 12:47 AM

Hey all,
I have a S&W .38 Special J-frame bodyguard snubby that was my grandfather's service revolver. I believe it's a model 38. I'm curious the DOB range.

230XXX

Thanks much

BurkGlocker · January 13, 2009, 01:59 AM

I have a S&W Regulation Police chambered in 38S&W but it only has a 3 digit S/N, 7XX. Doesnt have the wood grips, but stag grips in their place. Mostly just wondering its age. Any help would be appreciated... Thanks in advance...

Brad

laytonj1 · January 13, 2009, 02:00 AM

Quote:

Hey all,
I have a S&W .38 Special J-frame bodyguard snubby that was my grandfather's service revolver. I believe it's a model 38. I'm curious the DOB range.

230XXX

Serials numbers ran from 125000 in 1957 to 295000 in 1962.

Jim

laytonj1 · January 13, 2009, 02:02 AM

Quote:

I have a S&W Regulation Police chambered in 38S&W but it only has a 3 digit S/N, 7XX.

Most likely first year - 1917.

Jim

BurkGlocker · January 13, 2009, 02:10 AM

Thanks Jim , appreciate it...

Brad

DoomMonky · January 13, 2009, 08:36 AM

Quote:

Serials numbers ran from 125000 in 1957 to 295000 in 1962.

Thank you very much for the quick response.

adjc · January 13, 2009, 08:29 PM

long time lurker time to register.
ok got a s/w model 10, .38 special, nickel, 5" bbl w/sn d104xxx ex. cond.
can anyone tell me what yr and possible value, gun was my dad's
and he's no longer here with us. would like to know something about it. thanks

is +p ammo any threat to it, can the gun cope with it alright?

laytonj1 · January 13, 2009, 09:08 PM

Quote:

ok got a s/w model 10, .38 special, nickel, 5" bbl w/sn d104xxx ex. cond. can anyone tell me what yr and possible value, gun was my dad's
and he's no longer here with us. would like to know something about it. thanks

is +p ammo any threat to it, can the gun cope with it alright?

1969. +P is okay. The condition of the nickel (scratches, scuffs, cloudiness)makes a big difference on value but from ~$250 to $400 neighborhood.

Jim

Smirf · January 13, 2009, 09:36 PM

Guessing 1970 if anyone can confirm. Mint too.

jal5 · January 13, 2009, 10:32 PM

Could you look up the date on my Model 66-2 ser. no AJTxxxx? thanks

Bluestreak · January 13, 2009, 10:51 PM

Hi all,
I have recently inherited a couple of my fathers guns and would really appreciate knowing the date of manufacture. The first one is a model 25-2 (.45 acp) serial N758xxx and the second is a 19-3 serial K893xxx. Thanks in advance for any help.

laytonj1 · January 14, 2009, 02:05 AM

Quote:

S&W model 40 nickel s/n LT121X

Recheck the "LT". Serial numbers for the M40 started at 1 in 1952 to 30160 in 1971 then L1 in 1971 to L9861 in 1974. Get the serial number from the bottom of the grip butt.

Quote:

Could you look up the date on my Model 66-2 ser. no AJTxxxx?

1986.

Quote:

The first one is a model 25-2 (.45 acp) serial N758xxx and the second is a 19-3 serial K893xxx.

N758XXX = 1980
K893XXX = 1969

Jim

adjc · January 14, 2009, 06:27 AM

thanks Jim, appreciate the info.

540mope · January 14, 2009, 07:12 AM

Quote:

Could you look up the date on my Model 66-2 ser. no AJTxxxx?
----------------------------
1986.

i have a 66-2, ALDxxxx, that was made late '85

according to the Standard Catalog of Smith & Wesson, your AJTxxxx was made between Jul. & Nov. 1985

Bluestreak · January 14, 2009, 08:01 AM

Thanks for the quick response Jim.

jal5 · January 14, 2009, 10:31 AM

thanks guys for the quick response!

billybadd · January 14, 2009, 10:42 AM

38 S&M CTG Victory revolver
S# V107XXX

Original gun but no lanyard ring.
Thanks in advance.

carguychris · January 14, 2009, 11:03 AM

Quote:

38 S&M CTG Victory revolver
S# V107XXX

I'm not familiar with the S&M cartridge, sounds kinda kinky.

Anyways, your gun was made in September or October of 1942.

billybadd · January 14, 2009, 11:39 AM

Funny. My mistake. Thank you.

January 12, 2009, 05:39 PM	#877
Joe R Junior Member Join Date: December 27, 2008 Posts: 2	laytonj1 Thanks for the info on the S&W, I appreciate it. Joe

January 12, 2009, 09:28 PM	#880
gwnorth23 Member Join Date: November 30, 2008 Location: Maine Posts: 16	Blk08rockerc Thanks for the info!

January 13, 2009, 08:29 PM	#888
adjc Member Join Date: January 13, 2009 Posts: 22	long time lurker time to register. ok got a s/w model 10, .38 special, nickel, 5" bbl w/sn d104xxx ex. cond. can anyone tell me what yr and possible value, gun was my dad's and he's no longer here with us. would like to know something about it. thanks is +p ammo any threat to it, can the gun cope with it alright? Last edited by adjc; January 13, 2009 at 08:39 PM.

January 13, 2009, 09:36 PM	#890
Smirf Junior Member Join Date: January 13, 2009 Posts: 2	S&W model 40 nickel s/n LT121X Guessing 1970 if anyone can confirm. Mint too.

January 14, 2009, 10:42 AM	#898
billybadd Junior Member Join Date: January 14, 2009 Posts: 2	Man. date request 38 S&M CTG Victory revolver S# V107XXX Original gun but no lanyard ring. Thanks in advance.

January 12, 2009, 09:07 AM	#876
BLK08ROCKERC Member Join Date: December 1, 2008 Location: Middle GA Posts: 27	That 686-5 is a 2000 model.

January 12, 2009, 09:23 PM	#879
spddrcr Junior Member Join Date: January 12, 2009 Posts: 2	thanks jim, i had found awhile ago that it went back due to the star designation. will smith and wesson clean it upo again if i asked them? im not really interested in selling the gun but would love for it to look a little better so i can frame it and hang it on the wall. the gun has quite the history so im told by the person who gave it to me

January 13, 2009, 12:47 AM	#882
DoomMonky Junior Member Join Date: January 13, 2009 Posts: 3	Hey all, I have a S&W .38 Special J-frame bodyguard snubby that was my grandfather's service revolver. I believe it's a model 38. I'm curious the DOB range. 230XXX Thanks much

January 13, 2009, 01:59 AM	#883
BurkGlocker Senior Member Join Date: May 18, 2008 Location: Sheppard AFB, TX Posts: 568	I have a S&W Regulation Police chambered in 38S&W but it only has a 3 digit S/N, 7XX. Doesnt have the wood grips, but stag grips in their place. Mostly just wondering its age. Any help would be appreciated... Thanks in advance... Brad

January 13, 2009, 02:10 AM	#886
BurkGlocker Senior Member Join Date: May 18, 2008 Location: Sheppard AFB, TX Posts: 568	Thanks Jim , appreciate it... Brad

January 13, 2009, 10:32 PM	#891
jal5 Senior Member Join Date: January 12, 2009 Location: NE Ohio Posts: 419	Could you look up the date on my Model 66-2 ser. no AJTxxxx? thanks

January 13, 2009, 10:51 PM	#892
Bluestreak Junior Member Join Date: January 13, 2009 Posts: 5	Hi all, I have recently inherited a couple of my fathers guns and would really appreciate knowing the date of manufacture. The first one is a model 25-2 (.45 acp) serial N758xxx and the second is a 19-3 serial K893xxx. Thanks in advance for any help.

January 14, 2009, 06:27 AM	#894
adjc Member Join Date: January 13, 2009 Posts: 22	thanks Jim, appreciate the info.

January 14, 2009, 08:01 AM	#896
Bluestreak Junior Member Join Date: January 13, 2009 Posts: 5	Thanks for the quick response Jim.

January 14, 2009, 10:31 AM	#897
jal5 Senior Member Join Date: January 12, 2009 Location: NE Ohio Posts: 419	thanks guys for the quick response!

January 14, 2009, 11:39 AM	#900
billybadd Junior Member Join Date: January 14, 2009 Posts: 2	Funny. My mistake. Thank you.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search