The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old December 3, 2011, 08:25 PM   #4751
RickyRocket
Junior Member
 
Join Date: December 1, 2011
Posts: 3
I posted a few days ago looking for some help, but no one seems to have seen my post. I have copied it here. I don't know anything about S&W's. I have had few revolvers but came across these two. I could could use any help though.
Thanks again,

I have two pre-M&P's that I know nothing about except made sometime in the 40's. Could I please get whatever info ya'll have ro share?

4" ser #C2289 (full number)
and
5" ser #912xxx this one has landyard ring

Thanks
RickyRocket is offline  
Old December 3, 2011, 10:16 PM   #4752
Dave Anderson
Senior Member
 
Join Date: March 4, 2011
Posts: 313
Quote:
I have two pre-M&P's that I know nothing about except made sometime in the 40's. Could I please get whatever info ya'll have ro share?

4" ser #C2289 (full number)
and
5" ser #912xxx this one has landyard ring
I'm pretty sure you meant to write "pre-number M&Ps". The M&P became the model 10 in 1957.

C2289 would have been made in 1948.

912XXX would have been made shortly before the V prefix was introduced (it was added when s/n 999999 was reached), most likely it was made in 1942, possibly mid to late 1941. The 5" barrel and lanyard ring makes me think it is most likely a .38 S&W made for British armed forces.

Last edited by Dave Anderson; December 3, 2011 at 10:24 PM.
Dave Anderson is offline  
Old December 4, 2011, 11:19 AM   #4753
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
I posted a few days ago looking for some help, but no one seems to have seen my post.
I answered your questions in post #4745.

Jim
laytonj1 is offline  
Old December 4, 2011, 11:41 AM   #4754
sfacash
Junior Member
 
Join Date: December 4, 2011
Posts: 4
S&W info

inherited a bone handle S&W 38 SPC ctg. From what I can tell from my research is that it is a post war model but a I know nothing about guns. Thanks for any help. I have attached a picture.

Serial number S 8435xx

Last edited by Glenn E. Meyer; November 30, 2013 at 11:47 AM.
sfacash is offline  
Old December 4, 2011, 11:55 AM   #4755
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Serial number S 8435xx
It's a .38 Military & Police which became the Model 10 when S&W began assigning model numbers in 1957. The short 2" barrel makes it more desirable to collectors.
Serial numbers ran from S811120 in 1945 to S999999 in 1948.

Jim
laytonj1 is offline  
Old December 4, 2011, 12:14 PM   #4756
sfacash
Junior Member
 
Join Date: December 4, 2011
Posts: 4
thanks

I look online and I have trouble finding anything similar for sale. Any idea on an approximate value?
sfacash is offline  
Old December 4, 2011, 12:22 PM   #4757
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Maybe $400 to $500, if it had the original grips.

Jim
laytonj1 is offline  
Old December 4, 2011, 12:32 PM   #4758
sfacash
Junior Member
 
Join Date: December 4, 2011
Posts: 4
thanks again

nm
sfacash is offline  
Old December 4, 2011, 02:29 PM   #4759
streetmaster
Junior Member
 
Join Date: July 6, 2010
Posts: 10
Date of Manufacture

I recently inherited a S&W Model 617-6 .22lr 6" 10rd.
Serial: CJA26XX
It has the safety lock and internal firing pin.
Can anyone tell me roughly what year it was made, and maybe what it's worth at about 95% condition?

Thanks,
Bob

Last edited by streetmaster; December 4, 2011 at 05:21 PM.
streetmaster is offline  
Old December 4, 2011, 05:05 PM   #4760
levallois
Member
 
Join Date: June 12, 2009
Posts: 63
I just got a 686-4 serial CBT33xx. Any help with a date of manufacture would be appreciated. Thanks!

John
levallois is offline  
Old December 5, 2011, 06:07 PM   #4761
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Serial: CJA26XX
Book only covers up to 2004. Yours is late/post 2004.
You can call S&W's customer service and they will give you the DOB over the phone for free.

1-800-331-0852 (USA)
Mon-Fri 8:00AM-8:00PM Eastern Time


Quote:
I just got a 686-4 serial CBT33xx
1997.

Jim
laytonj1 is offline  
Old December 5, 2011, 10:30 PM   #4762
thedaddycat
Senior Member
 
Join Date: September 25, 2011
Posts: 388
I received my "Standard Catalog of Smith and Wesson, 3rd Edition" today, so I will be able to start helping with data requests at this point. Thanks to those who have helped prior to this, I now stand ready to augment your efforts...
thedaddycat is offline  
Old December 6, 2011, 09:01 PM   #4763
RickyRocket
Junior Member
 
Join Date: December 1, 2011
Posts: 3
Thank you both Dave and Laytonj1. I apologize, I did not see your initial reply Laytonj1.

They are both in what I would call good condition. Any approximate value?
RickyRocket is offline  
Old December 6, 2011, 10:07 PM   #4764
BigHeadTodd
Junior Member
 
Join Date: December 6, 2011
Posts: 1
Need some help!

Hey guys! Just inherited a K-38 Combat Masterpiece/Model 15 from my uncle with the serial number K 257XXX. Not sure if it's a K-38 or a Model 15. Any info y'all can give me is greatly appreciated! Thanks in advance for the help!
BigHeadTodd is offline  
Old December 6, 2011, 11:36 PM   #4765
Dave Anderson
Senior Member
 
Join Date: March 4, 2011
Posts: 313
Quote:
Hey guys! Just inherited a K-38 Combat Masterpiece/Model 15 from my uncle with the serial number K 257XXX. Not sure if it's a K-38 or a Model 15.
My books say it was made in 1955 so assuming it has a 4" barrel it would be a Combat Masterpiece. S&W didn't begin using model numbers until 1957.

Beautiful revolvers, I like the balance, handling, and overall quality. If yours has the original grips they will have a diamond pattern around the grip screws, and the right-hand grip panel will be serial numbered to the gun.
Dave Anderson is offline  
Old December 7, 2011, 10:57 AM   #4766
jhog1
Senior Member
 
Join Date: April 11, 2010
Location: Rensselaer Co NY
Posts: 221
In the process of buying a 686 and he said there are two # but not sure which is the serial # first one is 5412x and the other is AFK253X I would like to know which is the serial and how old it is
jhog1 is offline  
Old December 7, 2011, 01:27 PM   #4767
scrappee
Junior Member
 
Join Date: December 7, 2011
Location: Fay., NC
Posts: 4
new guy here. Have been holding on to these two revolvers for 30 years now. Time to find out more about them and what they may be worth.
S&W .38 special, 4" nickel plated, fair condition #E 130XX.
S&W .32, blue, 6", good condition #B2494XX. thanks
scrappee is offline  
Old December 7, 2011, 03:48 PM   #4768
thedaddycat
Senior Member
 
Join Date: September 25, 2011
Posts: 388
"In the process of buying a 686 and he said there are two # but not sure which is the serial # first one is 5412x and the other is AFK253X I would like to know which is the serial and how old it is "

OK, I'll give this a shot but please bear in mind that I just got my "Standard Catalog of S&W, 3rd Edition" so I'm still on the upslope of the learning curve....

There is a note that there is a three year transition period from 1980-1983 where S&W started using a three letter prefix followed by a four digit number. The dates are start dates for those serial number runs. I am using "Appendix 2, Serial Number range by years - Approximate" to find this information. This appendix starts on page 395 of my book.

It lists Serial Nos. of the AEV-AFJ range as November 1984 and then jumps to AHA 0667 in January 1985. I cannot find a listing for the AFK prefix. This information is on page 400 of my book. Others more knowlgeable in the use of this reference book please feel free to cross check me as I would like to learn if I'm doing it right or not.

"S&W .32, blue, 6", good condition #B2494XX. thanks "

B prefix, Model 61 Escort, 1970-1978 B-1 to B-65438

Your number falls outside the range listed and has six digits but this is the only B prefix reference I found. I have the Blue Book of Gun Values, so if you can give me the Model Nos. I will try to look them up for you.

"S&W .38 special, 4" nickel plated, fair condition #E 130XX."

I can find no E prefix data, sorry.

I guess I need some help with using this reference source. Again, if you are more familiar with the Standard Catalog of S&W, 3rd edition please help point me in the right direction so that I can give more useful help to those requesting it. Thanks in advance for any pointers.
thedaddycat is offline  
Old December 7, 2011, 05:45 PM   #4769
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
AFK253X
1984/85.
Nov 84 ended at AFJ and AHA started Jan 85, so it would fall between them.

Quote:
S&W .38 special, 4" nickel plated, fair condition #E 130XX.
S&W .32, blue, 6", good condition #B2494XX. thanks
Those are not the serial numbers. Double check that "B", it might be a "K".
Take the SN from the underside of the grip butt. Depending on the type of grips on your guns you may have to remove them to see the SN.
See pic:

Jim
laytonj1 is offline  
Old December 7, 2011, 08:21 PM   #4770
scrappee
Junior Member
 
Join Date: December 7, 2011
Location: Fay., NC
Posts: 4
these #'s were taken from the butt of both guns, grips on. with the exception of the "B" on the .32 Long CTC. The "B" was found with the # under the barrel with the cylinder open, but was not with the # on the butt. could the serial # be somewhere else?

Ah ha! found these words on the front side of the butt of the .38.
ORBEA EIBAR

Last edited by scrappee; December 7, 2011 at 09:14 PM.
scrappee is offline  
Old December 7, 2011, 09:32 PM   #4771
Thenarwhal
Junior Member
 
Join Date: August 27, 2009
Posts: 3
Model 29

How about a model 29, 8 3/8", SN: N3519XX? Can anyone give me any information?
Thenarwhal is offline  
Old December 8, 2011, 11:31 AM   #4772
jhog1
Senior Member
 
Join Date: April 11, 2010
Location: Rensselaer Co NY
Posts: 221
Quote:
In the process of buying a 686 and he said there are two # but not sure which is the serial # first one is 5412x and the other is AFK253X I would like to know which is the serial and how old it is

Thank you for the info, Do either of you know what the other numbers is ? 5412x
jhog1 is offline  
Old December 8, 2011, 06:15 PM   #4773
leandromartini
Junior Member
 
Join Date: December 8, 2011
Posts: 1
Date

Hello
I have a S & W 66-2 with numbering starting BAUxxxx what would be the year of manufacture?
Congratulations to the forum shared by the vast experience to users
Thank you!
leandromartini is offline  
Old December 8, 2011, 07:06 PM   #4774
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Ah ha! found these words on the front side of the butt of the .38.
ORBEA EIBAR
Yeah, and the other serial number is not a S&W serial number either.
Quote:
model 29, 8 3/8", SN: N3519XX
N3xxxxx ran from 1975 to 1976.

Quote:
Do either of you know what the other numbers is ? 5412x
Assembly numbers. It's how they keep track of matched parts thru the assembly process.

Quote:
S & W 66-2 with numbering starting BAUxxxx
1988.

Jim
laytonj1 is offline  
Old December 8, 2011, 11:40 PM   #4775
uncmrkhd
Junior Member
 
Join Date: July 7, 2011
Posts: 2
age of my Mod 37

I recently adopted a mod 37 and wonder just how old it is. numbers on butt are 1J153xx. Its been around the block a few times but sure is a blast to shoot
uncmrkhd is offline  
Reply

Tags
s&w 686

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:03 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2024 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.41785 seconds with 9 queries