April 27, 2007, 12:17 AM | #1 |
Senior Member
Join Date: October 20, 2006
Location: Eastern Pa.
Posts: 137
|
ID ..45 Brass
I have about 800 .45 auto brass cases with the case head marked: .45 auto CBC. Can anyone tell me the manufacturer? I am not familiar with this ammo maker and am worried that it may be the ammo from the manufacturers you guys have warned people not to use. Thanx.
|
April 27, 2007, 04:30 AM | #2 |
Junior Member
Join Date: February 8, 2002
Posts: 7
|
According to this web page:
http://cartridgecollectors.org/heads...des_bottom.htm It is: CBC Companhia Brasileira de Cartuchos, Avenida Industrial No 3330, Santo Andre, Estado de Sâo Paulo, Brazil (ca'1997: Av Humberto de Compos 3220, 09400 000 Ribeirao Pires SP, Brazil) I couldn't tell you if it's any good or not though...sorry. |
April 27, 2007, 05:55 AM | #3 |
Senior Member
Join Date: January 9, 2007
Location: Omaha, NE
Posts: 177
|
my experience with CBC in 45 seems to be ok, I have found a few at the range. 9mm is a different story it is absolute junk.
|
April 27, 2007, 12:27 PM | #4 |
Member
Join Date: April 17, 2007
Location: Arkansas
Posts: 21
|
All the Magtech .454 ammo I’ve bought has come loaded in CBC brass, but that’s the extent of my knowledge of it.
|
April 27, 2007, 12:36 PM | #5 |
Junior member
Join Date: April 27, 2007
Posts: 35
|
+ 1 to what John said. I have some .357 that are Magtech and say CBC on the brass
|
April 27, 2007, 06:55 PM | #6 |
Senior Member
Join Date: October 20, 2006
Location: Eastern Pa.
Posts: 137
|
Thanks guys for identifying the beass and your answers, I will probably put them in the trash!
|
April 27, 2007, 10:26 PM | #7 |
Senior Member
Join Date: May 22, 2006
Location: Missouri
Posts: 294
|
Magtech. I have not had any problem loading this brass in .45acp or .40 S&W.
__________________
Just because your paranoid don't mean they aint out to get ya. |
|
|