|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
January 15, 2022, 06:36 AM | #1 |
Senior Member
Join Date: January 1, 2000
Location: VA
Posts: 396
|
Lower Power .22 Hornet Loads?
Can a .22 Hornet be loaded down to near .22 WMR levels and still be consistent and, depending on the rifle, accurate?
|
January 15, 2022, 09:24 AM | #2 |
Senior Member
Join Date: May 20, 2007
Posts: 2,448
|
I've not done it, but I don't see why not. A look at Quickload (sorry, not sharing numbers) indicates a slightly slower powder than my usual H110 or Lil' Gun will put you in 22 mag range with a moderately full case. Not sure why you would want to do that, though.
|
January 15, 2022, 01:31 PM | #3 | |
Staff
Join Date: March 11, 2006
Location: Upper US
Posts: 28,795
|
Quote:
And, once tool costs are paid for it gets even cheaper with cast bullets. My old (1970) Lyman manual shows a cast 45gr bullet over 3.5gr Unique doing 1669fps from the test gun a 26" barrel Savage 219. Its the starting load listed, along with 6gr 2400 (1635fps) and 7gr IMR 4227 (1727fps) for that bullet. Isn't this the ballpark you're looking for?? Loading for the Hornet is finicky, painstaking work, becasue the brass is THIN and cases, bullets, powder charges are small, but other than that its straightforward and no different from any other bottleneck case. I do recommend either a very generous chamfer of the case mouth, OR using an expander die (Lyman M) to flare the case mouth SLIGHTLY. BT bullets are also helpful. Case neck brass is very thin, and very easily buckled, I've never been a fan of the .22WMR, not due to its performance, which is respectable, but due to the fact that I've always felt it cost much more than it was worth. AND its not reloadable. Last time I bought .22WMR it was $6 a box (tells you how long ago that was, ) and it was more than 6x the cost of .22LR and NOT even close to 6x the performance. I've never actually loaded down the Hornet, (no reason to for me) but I've always been pleased with the idea that I could, if I needed to. Good Luck!
__________________
All else being equal (and it almost never is) bigger bullets tend to work better. |
|
January 15, 2022, 01:57 PM | #4 |
Senior Member
Join Date: January 1, 2000
Location: VA
Posts: 396
|
Thanks!!
|
January 16, 2022, 09:16 AM | #5 |
Senior Member
Join Date: October 17, 2007
Location: WI
Posts: 621
|
I’m deep into the Hornet now, but just using a mid charge of IMR-4227 powder. A nice gentleman gave me some 33 grain bullets he had no use for, using them.
I’d think one could use min listed charges & come down some. |
January 16, 2022, 05:55 PM | #6 |
Staff
Join Date: March 4, 2005
Location: Ohio
Posts: 21,057
|
CAUTION: The following post (or a page linked to) includes or discusses loading data not covered by currently published sources of tested data for this cartridge (QuickLOAD or Gordon's Reloading Tool data is not professionally tested). USE AT YOUR OWN RISK. Neither the writer, The Firing Line, nor the staff of TFL assumes any liability for any damage or injury resulting from the use of this information.
For mimicking the MRF, a faster powder running at a somewhat higher pressure will burn cleaner and produce more consistent velocity. I'd actually try standard small pistol primers and 231/HP38 or maybe Universal in the 3½ to 4.0-grain range. You might even make it to the bottom of the magnum velocity range with a 100% loading density charge of Trail Boss.
__________________
Gunsite Orange Hat Family Member CMP Certified GSM Master Instructor NRA Certified Rifle Instructor NRA Benefactor Member and Golden Eagle |
January 17, 2022, 01:26 AM | #7 |
Senior Member
Join Date: March 20, 2011
Location: Willamina, OR
Posts: 1,908
|
I found a load in an old book for a 45g bullet loaded in the hornet using Unique. I'll have to check my notes but I think the load was around 4g. If you look around there might be other low power loads for the Hornet.
Tony |
January 31, 2022, 05:41 PM | #8 |
Senior Member
Join Date: February 22, 2014
Posts: 868
|
22 Hornet loads from P.O. Ackley Hand book for shooters & Reloaders Volume 1. 9th. printing 1976. 45gr. bullet, 8 gr. of 2400 Vel. 2375. Note: the loads in this book are very old. Find the book and read about a lot of conditions that blow up.
Keep it simple. Go with a heavy bullet and that is it. Find a load with Trail Boss as Unclenick suggests. My 22 K Hornet is a great round. Cases are just a little longer life. Good luck |
February 2, 2022, 05:57 PM | #9 | |
Senior Member
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
|
Quote:
__________________
Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services |
|
February 2, 2022, 06:10 PM | #10 |
Senior Member
Join Date: January 1, 2000
Location: VA
Posts: 396
|
Thanks for all the replies
|
Thread Tools | Search this Thread |
|
|