The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Bolt, Lever, and Pump Action

Reply
 
Thread Tools Search this Thread
Old October 19, 2020, 04:44 PM   #1
yournodaisy
Senior Member
 
Join Date: April 7, 2011
Location: Deep South
Posts: 306
Remington 700 BDL

Ok guys I'm an old hat. I want to add a Remington 700 BDL to my collection for old time sake. I have Sakos, Kimbers, Winchesters, etc but I want a 700. I looked at one today at Sportsmans Warehouse a BDL in .270. and it looked great. Wood was nice, bluing really nice and action and trigger was nice. Even though trigger was different than what I remember. However it was crisp with no overtravel. My question is, since Remington was a disaster in the last years or so, has anyone tried the 700's made in the last YEAR or Two. If so, opinions appreciated. Thanks.
yournodaisy is offline  
Old October 19, 2020, 10:20 PM   #2
GeauxTide
Senior Member
 
Join Date: April 20, 2009
Location: Helena, AL
Posts: 4,423
I have a 700VTR in 308, a 700 in 243, 280 (Shaw Barrels), 7mmRM, and an old 700 re-barreled to 338-06 (Shilen). All have Timney Hunter Triggers. All but the 338 are less than 3 years old. The factory 7mmRM has a Bell&Carlson stock and shoots 1/2". The 243 shoots 75s into .3". If I was going to add a factory 700, it'd be a CDL. None of the above have factory stocks, either. The VTR and 243 have Magpul Hunter, the 280 has B&C, and the 338 has a Boyd's Laminate.
__________________
Reloading For: 223R, 243W, 6.5 GR, 6.5 CM, 260R, 6.5-06, 280R, 7mmRM, 300HAM'R, 308W, 30-06, 338-06, 9mm, 357M, 41M, 44SPL, 44M, 45 ACP, 45 Colt, 450BM.
GeauxTide is offline  
Old October 20, 2020, 01:02 PM   #3
T. O'Heir
Senior Member
 
Join Date: February 13, 2002
Location: Canada
Posts: 12,453
"...trigger was different..." New rifles need a trigger job anyway. And there is lots and lots of aftermarket stuff for M700's.
"...since Remington was a disaster..." They are a disaster. Financially. That will show in the QC. However, I very much doubt a 700 would be unsafe to shoot.
I'd be thinking price myself. MSRP is $1,014US.
__________________
Spelling and grammar count!
T. O'Heir is offline  
Old October 20, 2020, 01:33 PM   #4
yournodaisy
Senior Member
 
Join Date: April 7, 2011
Location: Deep South
Posts: 306
I'll look at it again. Price was 849.00
yournodaisy is offline  
Old October 20, 2020, 01:44 PM   #5
godale
Senior Member
 
Join Date: September 22, 2014
Posts: 178
The stocks are nice on the bdls . Shouldn’t have to change that one


Sent from my iPhone using Tapatalk
godale is offline  
Old October 20, 2020, 04:54 PM   #6
yournodaisy
Senior Member
 
Join Date: April 7, 2011
Location: Deep South
Posts: 306
Ill try the trigger if its improved. If not I already found timney trigger for it.
yournodaisy is offline  
Old October 20, 2020, 06:32 PM   #7
hounddog409
Senior Member
 
Join Date: July 9, 2015
Posts: 115
I'm not spending that much on a rifle that needs the trigger and/or stock replaced.

Might as well spend a little bit more on something better.
Your talking 800-900 for a rifle, then adding what 3-400 more for a trigger and stock?

That's crazy.
hounddog409 is offline  
Old October 21, 2020, 10:16 AM   #8
skywag
Senior Member
 
Join Date: February 24, 2011
Posts: 254
I'd get a CDL

https://www.gunbroker.com/item/881135345
skywag is offline  
Old October 21, 2020, 06:24 PM   #9
hounddog409
Senior Member
 
Join Date: July 9, 2015
Posts: 115
I'd get a Bergara B14 Wilderness.

.....what the Remington SHOULD be.
hounddog409 is offline  
Old October 21, 2020, 08:19 PM   #10
joed
Senior Member
 
Join Date: November 28, 2014
Posts: 442
Quote:
Originally Posted by hounddog409 View Post
I'm not spending that much on a rifle that needs the trigger and/or stock replaced.

Might as well spend a little bit more on something better.
Your talking 800-900 for a rifle, then adding what 3-400 more for a trigger and stock?

That's crazy.
As much as I like the 700 I have never owned one with a wood stock that didn't need bedding work. I would change the trigger immediately upon purchase.
__________________
The 6 gun was once as common as the cellphone is today, and just as annoying when it went off in the theater.
joed is offline  
Old October 23, 2020, 10:18 AM   #11
Tony Z
Senior Member
 
Join Date: September 29, 2013
Location: North Central Pennsyltucky
Posts: 749
My 700 BDL, bought used in the early 80s, is a very accurate hunting rifle. As said, it was bought used, so I'm not sure the exact age. It is a .270, and the stock has been glass bedded and trigger re-worked.
Tony Z is offline  
Old October 23, 2020, 10:22 AM   #12
Picher
Senior Member
 
Join Date: December 14, 2004
Location: Maine
Posts: 3,694
If I were to buy another hunting rifle, after hunting with Rem 700s for about 45 years, I'd think hard about a Tikka. I have a Tikka .243 and it is a great factory rifle, especially after bedding/free-floating. The trigger, action, and barrel are outstanding and the wood stock is really good.
Picher is offline  
Old October 23, 2020, 04:26 PM   #13
yournodaisy
Senior Member
 
Join Date: April 7, 2011
Location: Deep South
Posts: 306
Thanks for the replys, however I think most forgot the reason for this post. I know there's better rifles out there. I have Winchester M70 extreme weather, Kimber 8400, Sako 75. My post was about adding an older classic M700 BDL to the collection, and what people thought about the news ones today. Thanks again.
yournodaisy is offline  
Old October 23, 2020, 06:27 PM   #14
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
If you wnat a Remington 700 BDL, buy one, it's one of the best rifles on the market. The Remington 700 BDL or CDL is a beautiful classic wood stocked hunting rifle. They typically shoot good right out of the box. Are there lemons? Sure. But I see a lot more Tikkas, Savages, Brownings and Winchesters in my shop for accuracy and reliability issues than I do Remington 700s. Most Remingtons come in for cleaning, scope mounting, a new recoil pad, etc. Savages come in because of trigger issues, Brownings come in for light strikes, Tikkas come in because they need muzzle brakes because they kick too hard. Not sure where all the broke Remingtons are if they're so bad according to the internet experts. People buy a $389 Remington 700 combo from WalMart then complain it has problems. I can sum up 75% of the issues under "operator error", many of the rest under cheap gun parts. People come to me with their rifles and tell me they won't shoot accurately, I go to the range and print cloverleaf groups with it. People tell me their rifle won't feed, I put ammo in it and it works like a charm. They tell me about poor fit and finish then hand me a plastic-stocked rifle. WTH?
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Scorch is offline  
Old October 23, 2020, 06:35 PM   #15
godale
Senior Member
 
Join Date: September 22, 2014
Posts: 178
Quote:
Originally Posted by Scorch View Post
If you wnat a Remington 700 BDL, buy one, it's one of the best rifles on the market. The Remington 700 BDL or CDL is a beautiful classic wood stocked hunting rifle. They typically shoot good right out of the box. Are there lemons? Sure. But I see a lot more Tikkas, Savages, Brownings and Winchesters in my shop for accuracy and reliability issues than I do Remington 700s. Most Remingtons come in for cleaning, scope mounting, a new recoil pad, etc. Savages come in because of trigger issues, Brownings come in for light strikes, Tikkas come in because they need muzzle brakes because they kick too hard. Not sure where all the broke Remingtons are if they're so bad according to the internet experts. People buy a $389 Remington 700 combo from WalMart then complain it has problems. I can sum up 75% of the issues under "operator error", many of the rest under cheap gun parts. People come to me with their rifles and tell me they won't shoot accurately, I go to the range and print cloverleaf groups with it. People tell me their rifle won't feed, I put ammo in it and it works like a charm. They tell me about poor fit and finish then hand me a plastic-stocked rifle. WTH?


Very true statement


Sent from my iPhone using Tapatalk
godale is offline  
Old October 23, 2020, 10:15 PM   #16
yournodaisy
Senior Member
 
Join Date: April 7, 2011
Location: Deep South
Posts: 306
I pulled the trigger on it. So far everything looks great. When I have time I'll let yall know how it shoots. Looks as good as the 1974 BDL I had. Thanks for all input folks.
yournodaisy is offline  
Old October 23, 2020, 10:27 PM   #17
godale
Senior Member
 
Join Date: September 22, 2014
Posts: 178
Quote:
Originally Posted by yournodaisy View Post
I pulled the trigger on it. So far everything looks great. When I have time I'll let yall know how it shoots. Looks as good as the 1974 BDL I had. Thanks for all input folks.


That’s great news


Sent from my iPhone using Tapatalk
godale is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:29 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.05889 seconds with 10 queries