|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
July 27, 2017, 07:35 PM | #1 |
Junior Member
Join Date: July 17, 2017
Posts: 3
|
re thread a taurus 608's frame
Hi guys, A while ago I took my taurus 608 revolver apart and stored the parts with some bleach bottles by accident when I comeback the parts become super rusted. I can't put the barrel back-on anymore because of the rust in the frame's thread part So I decided to go and re-thread that part with a threat tap.
What size and type of thread tap should I use. |
July 27, 2017, 07:36 PM | #2 |
Junior Member
Join Date: July 17, 2017
Posts: 3
|
the gun is a taurus 608 .357 magnum
|
July 27, 2017, 08:14 PM | #3 |
Senior Member
Join Date: April 25, 2008
Posts: 305
|
Taurus made a change in the frame threads during the production of the M608. The problem is, nobody knows exactly when.
You'll have to measure the barrel threads to know what you have. |
July 27, 2017, 09:18 PM | #4 |
Junior Member
Join Date: July 17, 2017
Posts: 3
|
it major diameter is 0.584 inch and 30-32 pitch in an inch. What is the thread tap for it?
|
|
|