The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools Search this Thread
Old January 26, 2021, 08:55 PM   #26
Nick_C_S
Senior Member
 
Join Date: March 21, 2013
Location: Taxifornia
Posts: 5,141
Quote:
. . . special considerations?
*sigh* Late to the party again

Unclenick has given you the obligatory plunk illustration; which is likely among the most useful things you'll ever seen on the interweb. So we got that outta the way.

I've been loading 45 ACP since October 1984. Tens of thousands of rounds, to be certain. With a minor shoulder shrug or two along the way, I pretty much agree with everything stated.

I want to emphasize the W231/HP-38 thing: It'll do about 95% of everything you'll need to do with 45 ACP - save max velocity; especially with heavies (230's). Otherwise, it'll do it all.

Bullseye is right there too. But it is just a tick faster than W231 and a lot more energetic. So that translates to less forgiveness on the top end.

As for TiteGroup: I've used a fair amount of it in 45 ACP. And it works great. But it runs hot, so it is best reserved for jacketed or plated slugs. But in that role, it delivers great, consistent performance. Even more than Bullseye, it's super energetic, so pushing max pressure can be a nervy task. I had great luck with it pushing 200gn plated FP's.

All that said, I think the main thing I can add here is that propellants used in 45 ACP behave slower than you'd expect. It's like burn rate chart "shifts" down a notch or two. I don't know, but I have speculated that it has something to do with 45 ACP's aspect ratio (it's short n fat ), along with it's low pressure. Whatever the case may be, everything is slower. So what is considered to be a fast power can deliver some surprising velocities.
__________________
Gun control laws benefit only criminals and politicians - but then, I repeat myself.
Life Member, National Rifle Association
Nick_C_S is offline  
Old January 26, 2021, 10:39 PM   #27
Schlitz 45
Senior Member
 
Join Date: January 14, 2018
Location: Colorado
Posts: 264
I’ve been using a lot of CFE Pistol lately in 380, 9mm, & 45 ACP. I can load less than max & get a 230gr plated 45 bullet over 900fps out of a 5” barrel if I want to but choose to load medium range at around 850 fps as it seems to group tighter for me, plus the CFE seems to have less residue & the pistols clean up a bit easier too.
Schlitz 45 is offline  
Old January 26, 2021, 10:44 PM   #28
rc
Senior Member
 
Join Date: April 28, 2001
Location: CA
Posts: 1,316
Low pressure round that likes Bullseye up to 231ish speed powders. Clays also works well. 230 grain is best all around for nice consistent reloads. If you step up to 185s, you may want to go to a bit slower powder.
rc is offline  
Old January 27, 2021, 10:23 AM   #29
Constrictor
Member
 
Join Date: February 19, 2013
Posts: 48
I've loaded and shot over 100,000 230g round nose .45 over 5.8G unique. Nice accurate clean burning and great metering.
Constrictor is offline  
Old January 29, 2021, 05:12 PM   #30
darkgael
Senior Member
 
Join Date: February 9, 2006
Location: Homes in Brooklyn, NY and in Pennsylvania.
Posts: 5,359
4.2 - 4.8 Bullseye works fine with 185s
__________________
“Auto racing, bull fighting, and mountain climbing are the only real sports ... all others are games.” Ernest Hemingway ...
NRA Life Member
darkgael is offline  
Old January 29, 2021, 07:33 PM   #31
308Loader
Senior Member
 
Join Date: August 24, 2014
Location: Minnesota
Posts: 585
Lots of great info here. Thank you all. Dies will be here tomorrow. Sorting head stamps right now. No luck with any of the powders mentioned, out of stock every where I’ve looked. Same with bullets. Had an order placed with Cabela’s for some plated bullets, was notified today that it was canceled. Out of stock. Large pistol primers are also nonexistent. Seems that shopping the web is no go. Have had some luck with local stores for some components, just not these. Guess ill be waiting until next year to load anything. Did get some S&b rounds from the gun club, so at least I’ve been able to shoot a few through it. Was starting to get concerned I bought a expensive paper weight.

Thanks again for all the reply’s. will let you know how it went after the drought lifts.
__________________
Just a dude with stuff.
308Loader is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:39 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2020 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.05532 seconds with 10 queries