The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Reply
 
Thread Tools Search this Thread
Old October 26, 1998, 10:52 PM   #1
.
Senior Member
 
Join Date: October 6, 1998
Location: My wife's house...
Posts: 2,659
My Dad bequethed one of these to me. I've been told that they tend to go full auto if the trigger and sear interrupt parts (similar in design to the 1911 pistol as both were designed by JM Browning) are not kept very clean.

Does anyone have any historical information regarding these guns being deliberately modified to fire full-auto for trench warfare or ship security?

[This message has been edited by Mykl (edited 10-26-98).]
. is offline  
Old October 27, 1998, 11:02 AM   #2
fal308
Staff Alumnus
 
Join Date: October 12, 1998
Location: Missouri
Posts: 1,992
Mykl The book "The World's Fighting Shotguns" has some info on the 1911. According to the book, it was never considered for a fighting role. There's no info on the full auto problem but it goes on the say that there were problems. E-mail me if you want more info.
fal308 is offline  
Old October 27, 1998, 01:29 PM   #3
.
Senior Member
 
Join Date: October 6, 1998
Location: My wife's house...
Posts: 2,659
FAL308,

Thanks for the feedback on this gun's operational obscurity. This was a matter of curiosity as I know it's Remington cousin, the Model 11, had seen military service in the hands of the shipboard MAs and their SP counterparts. I'll contact you via email regarding my own endeavors on this particular gun, but for the sake of our casual forum readers I'll herein render what little information I know of the gun.


The Winchester 1911SL (self loading) shotgun was the original John Moses Browning automatic shotgun design.

Its operating mechanism is the now classic Browning short-recoil cycle. Firing recoil initiates a rearward movement of the locked barrel/bolt unit. The barrel/bolt assembly is slowed by the barrel lug compressing a recoil-spring and the binding effect of a friction washer assembly that surrounds the magazine tube, then the barrel lug impacts a stop on the receiver face, the barrel’s rearward movement stops abruptly, the bolt unlocks, disengages from the barrel extension, then momentum carries the bolt on its rearward movement, extracting and ejecting the spent case, all the while being continuously slowed by a bolt recoil spring mounted in the butt-stock. The barrel recoil spring returns the barrel and its extension to battery, and a bolt recoil spring initiates the forward movement of the bolt and the elevation of new cartridge inline to the breech axis. The recoil spring continues the forward movement of the bolt and cartridge to their respective lock-up positions at the barrel extension and breech.

This model is unique in that it is actuated by grasping a knurled portion of the barrel, behind the front sight and compressing the barrel down into the receiver to duplicate its short-recoil firing cycle. There is no bolt handle as is standard on almost all subsequent auto shotgun designs. The sear and disconnector arrangement of the Winchester 1911SL is almost identical to that of the 1911 Colt pistol, which he had also designed. Additionally, all of the metal component parts including the receiver and barrel extension are milled from forged steel billets, a prohibitively costly process in this day and time.

The 1911 SL in its original condition suffers from a barrel recoil spring that soon weakens and causes the barrel to batter at its stop. An obvious symptom of the spring fatigue is the fore-stock splitting from the repeated shock. The butt-stock is of a tri-laminate design that also doesn't withstand field use well, and eventually separates. The bolt recoil spring guide is essentially a metal capped wooden dowel, that is prone to swelling, softening and eventually breaking within the milled-out center layer of the butt-stock, usually resulting in a binding of the bolt recoil spring and rendering the firearm useless except as a club (remember, no bolt handle to assist the bolt back into battery with the barrel breech).

JM Browning had a serious disagreement with Winchester over this firearm, and as a result severed all relations with them. He took the design to Herstal, Belgium, for its production under license by Fabrique Nationale des Armes (FN) as the now famous Browning Automatic Shotgun (this version added a bolt handle and dropped the knurling on the barrel, but otherwise it was the same action), which in its recently discontinued configuration was called an Auto-5. His new arrangement with FN was sufficiently satisfactory to him, such that after his death they continued the development and production of his last brainchild, the now ubiquitous Browning Hi-Power.

. is offline  
Old October 27, 1998, 02:41 PM   #4
4V50
Retired Screen Name
 
Join Date: November 17, 2000
Posts: 83
Mkyl,

Excellant writing. Wish I could write like you. Webmaster, award this man. Seriously.

4V50
4V50 is offline  
Old November 2, 1998, 12:07 AM   #5
GLV
Junior member
 
Join Date: October 14, 1998
Location: Logansport, IN, USA
Posts: 217
Mykl, you left out a few things. Winchester manufactured just 3 of the 13 shotguns bought from Browning, the 87, 93, and 97. The reason the 1911SL did not have an op rod handle is that to do so would have been in conflict with the Browning patent. Brownings patents on the semi auto shotgun were 10/9/00, 12/17/01, 9/30/02, and 2/13/06. An after the fact agreement allowed by FN let Browning license both Remington and Savage to manufacture the A-5. Why did Winchester bring this weak flawed design to market? The Remington Model 11 ( Browning A-5) was eating their lunch! Gun was discontinued in 25 with less than 100k made. It was a long time until Winchester tried another auto shotgun -- the ill fated model 40 -- less than 10k produced. Winchester has never had a highly successful auto loading shotgun -- just because they, Winchester, would not pay John M. Browning royalties for the A-5. GLV
GLV is offline  
Old December 11, 1998, 09:29 PM   #6
.
Senior Member
 
Join Date: October 6, 1998
Location: My wife's house...
Posts: 2,659
GLV,

Thanks for setting the details of the historical record straight. You're right about the 1911SL not being a successful venture too, as I occasionally see them going for comparative peanuts at the gunshows.

[This message has been edited by Mykl (edited 12-11-98).]
. is offline  
Old February 22, 2000, 08:12 PM   #7
mikolapi
Junior Member
 
Join Date: July 22, 1999
Posts: 2
Does anyone know where I can get assembly/ disassembly instructions for the Model 1911s? I would like to find any diagrams, owners manuals, anything. Send any info or links to [email protected]

Thanks
Mikolapi
mikolapi is offline  
Old September 12, 2005, 08:18 PM   #8
hydroshok40
Junior Member
 
Join Date: September 12, 2005
Posts: 1
winchester 1911 sl info

I need some info for the winchester 1911 sl also please. I have one (gift) but the fore stock is missing and the butt stock is broke. i need to find a manual or specs, and parts.... thanks. you can send any infoto [email protected]
hydroshok40 is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:36 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.05565 seconds with 10 queries