|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
December 9, 2019, 08:32 AM | #1 |
Junior Member
Join Date: December 8, 2019
Posts: 3
|
Help Identify .22 long rifle
Need help identifying manufacture of a Royal Junior .22 Long Rifle. This rifle was my dads and would like to learn more about and also find replacement parts for the firing pin. Any help would be very grateful!!!
Thanks |
December 9, 2019, 09:40 AM | #2 |
Senior Member
Join Date: October 25, 2001
Location: Alabama
Posts: 18,543
|
Looks like a Stevens No 14 1/2 Little Scout with a store brand name.
Here is one like yours for sale. Other pictures have a plain knob takedown screw and a different breechblock contour. https://www.gunsinternational.com/gu...n_id=101272228 Numrich lists the firing pin but I don't know if there are two different firing pins for the different shape breechblocks. https://www.gunpartscorp.com/gun-man...2-little-scout Jack First is out of stock on firing pins but notes "may have to be shortened from the rear." which might be the breechblock shape effect. Frank DeHaas said it may be chambered for .22 LR but is not strong enough for any current ammo but .22 Short standard velocity. Or CB caps. |
December 9, 2019, 10:35 AM | #3 |
Junior Member
Join Date: December 8, 2019
Posts: 3
|
Awesome Thanks for the information i will take a look at those.
|
December 9, 2019, 02:04 PM | #4 |
Senior Member
Join Date: February 13, 2002
Location: Canada
Posts: 12,453
|
Supposedly, it's an H&A Model 722. Made until about 1914. Dunno how accurate this is.
https://www.tngunowners.com/forums/t...ling-block-22/
__________________
Spelling and grammar count! |
December 9, 2019, 05:20 PM | #5 |
Senior Member
Join Date: October 25, 2001
Location: Alabama
Posts: 18,543
|
I found that but HA action screw placement is different.
|
December 10, 2019, 01:55 AM | #6 |
Staff
Join Date: March 11, 2006
Location: Upper US
Posts: 28,846
|
Be aware that what is today considered "standard" .22LR is actually the "high velocity" load from old times, and so is not suitable for some of the old guns.
"Target" velocity ammo is better, and close to what was once the "standard" load. "strong enough" with an old .22 isn't so much about the gun blowing up when shot but more about current higher speed ammo wearing it out fast. Alloy steels then were not what they are now, and some of the oldest guns are actually IRON with just enough alloy to be technically steel. If you can find a firing pin it will still probably need to be fitted by a gunsmith to work properly. A good smith could make one if needed. Don't expect a " plug and play" fit, if you get one, fine, but don't count on it. also check the chamber were the firing pin strikes, if its peened, (from dryfiring) work may need to be done beyond another firing pin. Gunsmith time for that. good luck
__________________
All else being equal (and it almost never is) bigger bullets tend to work better. |
December 10, 2019, 07:27 AM | #7 |
Junior Member
Join Date: December 8, 2019
Posts: 3
|
Thanks guys for the info
|
|
|