ballistic turrets

dvodopich · August 17, 2010, 10:34 PM

i have a weatherby 30-378 with a swarovski z6 scope with an added ballistic turret with ranges up to 1050 yards. the problem in having is when i sighted it in it was 8 inches low at 100 yards so i adjusted the turret to raise it 8 in. now i can only adjust it to 700 yards then its max'd out because i had to turn it so far to raise it the 8 in, am i doing something wrong? thanks for your help

Brian Pfleuger · August 18, 2010, 11:28 AM

Isn't there a set screw that you can loosen to rezero the turrets? If not, it would be the first I'd seen without it.

zoomie · August 18, 2010, 11:32 AM

Assuming the scope is set up correctly, a MOA base (10-20 depending on what you need) would help.

August 17, 2010, 10:34 PM	#1
dvodopich Junior Member Join Date: August 17, 2010 Posts: 1	ballistic turrets i have a weatherby 30-378 with a swarovski z6 scope with an added ballistic turret with ranges up to 1050 yards. the problem in having is when i sighted it in it was 8 inches low at 100 yards so i adjusted the turret to raise it 8 in. now i can only adjust it to 700 yards then its max'd out because i had to turn it so far to raise it the 8 in, am i doing something wrong? thanks for your help

August 18, 2010, 11:28 AM	#2
Brian Pfleuger Moderator Emeritus Join Date: June 25, 2008 Location: Austin, CO Posts: 19,578	Isn't there a set screw that you can loosen to rezero the turrets? If not, it would be the first I'd seen without it. __________________ Nobody plans to screw up their lives... ...they just don't plan not to. -Andy Stanley

August 18, 2010, 11:32 AM	#3
zoomie Senior Member Join Date: January 23, 2006 Location: GA Posts: 1,864	Assuming the scope is set up correctly, a MOA base (10-20 depending on what you need) would help.