|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
May 25, 2009, 08:39 AM | #1 |
Member
Join Date: September 3, 2007
Posts: 34
|
What type of revolver is this?
My father was a WWII vet that served in the Navy. I inherited his old 6 shot revolver. I took it to a gunsmith and asked him if he could tell me it's background or its worth and shootability. He was not helpful at all. His suggestion was to cut it up and throw it away. It has been in my family for a very long time. The only problem that I can see is that the cylinder does not lock correctly each time the trigger is pulled.
Any help would be helpful. Thanks |
May 25, 2009, 08:42 AM | #2 |
Member
Join Date: September 3, 2007
Posts: 34
|
update
I forgot to mention that it is a.38spl and has 'Made in Spain' on the barrel
|
May 25, 2009, 08:47 AM | #3 |
Senior Member
Join Date: September 19, 2006
Location: Ulster County, NY
Posts: 146
|
Are there any other markings on the gun besides the rollmark on the frame near the barrel ? Can you make out clearly what that rollmark says ? In the pic it looks like is says "made is spain" .. but maybe that's not what it says at all...
|
May 25, 2009, 09:11 AM | #4 |
Member
Join Date: September 3, 2007
Posts: 34
|
Other Markings
I checked the entire gun over and there is no other markings other than a serial number on the bottom of the frame handel.
|
May 25, 2009, 11:59 AM | #5 |
Senior Member
Join Date: June 23, 2004
Location: Ohio
Posts: 5,676
|
Pre WW2 Spain did produce a few revolvers that had a good reputation. That apparently is not one of them. If the maker had any sort of reputation, it would be branded. I myself would not try to fix or fire it, either. Has no colletor value whatsoever and the only way it would have any value is if it were associated with some notable person or event. Sorry. Well it is an heirloom, those may only have value to the recipients but that is enough I suppose.
__________________
Your gun is like your nose, it is just wrong for someone else to pick it for you! |
May 25, 2009, 12:26 PM | #6 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
First, there is no connection between that revolver and your father's naval service. It is a Spanish revolver, of the kind imported into the U.S. in the 1920's and 1930's, and sold for a couple of dollars. They were made of cheap cast iron and I have seen several blown up.
As an heirloom, it has some sentimental value, but the dollar value is minimal and the gun is not worth spending time or money on even if parts could be obtained and anyone found willing to work on it. Most gunsmiths will not work on those guns for the simple reason that if a gunsmith fixes it so it works, then it blows up and someone is injured, the gunsmith could be liable. I suggest you deactivate it by grinding off the firing pin, then hang it on the wall. Jim |
May 25, 2009, 05:27 PM | #7 |
Senior Member
Join Date: September 19, 2008
Posts: 4,678
|
[His suggestion was to cut it up and throw it away.]
+1, but, barring that, (since it's been in your family so long) I would have it molded into the center of a block of clear acrylic, thereby making a conversation piece out out a hand grenade. . |
May 25, 2009, 07:01 PM | #8 |
Member
Join Date: September 3, 2007
Posts: 34
|
Thanks
Thanks for all of the help. I am glad that I asked this question before trying to fire this gun. I do like having all 5 digits on each hand
|
May 25, 2009, 07:16 PM | #9 | |
Senior Member
Join Date: January 19, 2009
Location: WI
Posts: 1,162
|
Quote:
|
|
May 27, 2009, 11:52 AM | #10 | |
Senior Member
Join Date: February 9, 2007
Posts: 3,101
|
Quote:
|
|
|
|