need a screw

nfernaays · January 30, 2009, 12:36 AM

looking for a firing pin screw for a stevens 107b single shot 12 gauge..willing to pay top dollar...please post info and fee

Scorch · January 30, 2009, 12:45 AM

Any gunsmith with a screw assortment can set you up. I believe it is a size 4 screw.

kraigwy · January 30, 2009, 09:07 AM

www.gunpartscorp.com

rocket12 · January 30, 2009, 11:35 AM

madmo44mag · January 30, 2009, 11:49 AM

Man was that header ever misleading

! ROFLMAO

sadsack · January 30, 2009, 04:52 PM

Mad: I saw the header and I knew right away he was a married man.

nfernaays · January 30, 2009, 06:35 PM

sorry if the header threw some of yah off...realized it after i posted....and i am married

checked www.gunpartscorp.com is out of stock its a strange screw its not fully threaded prolly going to have to take an existing screw to the shop and grind part of one down.

woad_yurt · January 30, 2009, 07:08 PM

Have you tried flowers or a bottle of wine? Maybe a scented candle?

A tip: It's always good to start the evening off by asking how her day went. Sometimes they just want to be heard.

James K · January 30, 2009, 08:21 PM

Well, it has to be really hard! I mean the screw of course, well, I mean...

Anyway, the THING acts as a firing pin retainer and can take a beating, so it should be fairly hard so it doesn't bend or you can't get it out. I do mean the firing pin screw, I really do.

Jim

Alleykat · January 31, 2009, 09:37 AM

To the OP: If you can find the screw, but are concerned about its hardness, just grind up one Cialis pill into a teaspoon of water and soak the screw in that solution. The screw will be hard for 36 hours, anytime you need it!

SilentHitz · January 31, 2009, 09:41 AM

grymster2007 · January 31, 2009, 04:16 PM

What's the thread pitch and size (diameter) of the screw? You can probably find one somewhere and if you have this info it will be easier.

nfernaays · February 8, 2009, 04:12 PM

want to thank everyone for there help with my screw problem, firing pin screw i mean, actually found that a savage 25 firing pin screw works the same as the original, flowers helped too

thanks everyone.

Inspector3711 · February 10, 2009, 10:42 PM

Quote:

its a strange screw

No... Nevermind....

January 30, 2009, 12:36 AM	#1
nfernaays Junior Member Join Date: January 25, 2009 Location: Western NY Posts: 6	need a screw looking for a firing pin screw for a stevens 107b single shot 12 gauge..willing to pay top dollar...please post info and fee

January 30, 2009, 12:45 AM	#2
Scorch Senior Member Join Date: February 13, 2006 Location: Washington state Posts: 15,248	Any gunsmith with a screw assortment can set you up. I believe it is a size 4 screw. __________________ Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services

January 30, 2009, 09:07 AM	#3
kraigwy Senior Member Join Date: June 16, 2008 Location: Wyoming Posts: 11,061	www.gunpartscorp.com __________________ Kraig Stuart CPT USAR Ret USAMU Sniper School Distinguished Rifle Badge 1071

January 30, 2009, 11:49 AM	#5
madmo44mag Senior Member Join Date: December 29, 2008 Location: Ft.Worth, Texas Posts: 1,522	Man was that header ever misleading! ROFLMAO

January 30, 2009, 07:08 PM	#8
woad_yurt Senior Member Join Date: February 15, 2008 Posts: 1,206	Have you tried flowers or a bottle of wine? Maybe a scented candle? A tip: It's always good to start the evening off by asking how her day went. Sometimes they just want to be heard. __________________ A Makarov? Simple, easy and works perfectly every time. ¡Vale! Last edited by woad_yurt; January 30, 2009 at 11:58 PM.

January 30, 2009, 11:35 AM	#4
rocket12 Senior Member Join Date: November 20, 2005 Location: ohio Posts: 148

January 30, 2009, 04:52 PM	#6
sadsack Senior Member Join Date: February 4, 2006 Posts: 206	Mad: I saw the header and I knew right away he was a married man.

January 30, 2009, 06:35 PM	#7
nfernaays Junior Member Join Date: January 25, 2009 Location: Western NY Posts: 6	sorry if the header threw some of yah off...realized it after i posted....and i am married checked www.gunpartscorp.com is out of stock its a strange screw its not fully threaded prolly going to have to take an existing screw to the shop and grind part of one down.

January 30, 2009, 08:21 PM	#9
James K Member In Memoriam Join Date: March 17, 1999 Posts: 24,383	Well, it has to be really hard! I mean the screw of course, well, I mean... Anyway, the THING acts as a firing pin retainer and can take a beating, so it should be fairly hard so it doesn't bend or you can't get it out. I do mean the firing pin screw, I really do. Jim

January 31, 2009, 09:37 AM	#10
Alleykat Junior member Join Date: July 26, 2007 Posts: 3,668	To the OP: If you can find the screw, but are concerned about its hardness, just grind up one Cialis pill into a teaspoon of water and soak the screw in that solution. The screw will be hard for 36 hours, anytime you need it!

January 31, 2009, 09:41 AM	#11
SilentHitz Senior Member Join Date: February 28, 2008 Location: Ms. Posts: 1,984

January 31, 2009, 04:16 PM	#12
grymster2007 Senior Member Join Date: May 22, 2007 Location: In the oak studded hills near Napa Posts: 2,203	What's the thread pitch and size (diameter) of the screw? You can probably find one somewhere and if you have this info it will be easier. __________________ grym

February 8, 2009, 04:12 PM	#13
nfernaays Junior Member Join Date: January 25, 2009 Location: Western NY Posts: 6	Finally got my screw want to thank everyone for there help with my screw problem, firing pin screw i mean, actually found that a savage 25 firing pin screw works the same as the original, flowers helped too thanks everyone.