|
September 22, 2012, 09:36 PM
|
#1 |
|
Junior Member
Join Date: August 11, 2012
Posts: 6
|
ruger sbh re assembly
Hey guys I'm looking for some help. I have a NM sbh in 44 mag. While cleaning it I removed the grip frame and cant get it to line back up with the screw holes in the rest of the gun. And a spring loaded plunger is givin me probblems. Any advice is appriecated.
|
|
|
September 22, 2012, 11:33 PM
|
#2 |
|
Junior member
Join Date: February 2, 2008
Posts: 3,150
|
Get the Ruger manual.
|
|
|
|
September 23, 2012, 12:17 PM
|
#3 |
|
Senior Member
Join Date: September 19, 2008
Posts: 4,678
|
You DID cock it and slip a small pin through the hole in the tail of the mainspring strut, to take the spring pressure off, BEFORE you removed the gripframe screws, right ? .
 . |
|
|
|
September 23, 2012, 10:34 PM
|
#4 |
|
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
The spring loaded plunger sounds like the hand spring. You should just be able to compress it by pushing on the grip frame.
Jim |
|
|
 |
|
|
