Gentleman on this forum +10

velocette · July 10, 2014, 05:02 PM

Over the past four months I have been communicating with Scorch, a frequent post'er here. I was in the process of building a sporting rifle with a nice stock.
Over the four months Scorch patiently answered questions, gave guidance, made suggestions and generally freely gave of his time. His valuable time I might add, as he runs a gunsmithing business. Ultimately it turned out that my project did not need the services of a REAL gunsmith & I was able to proceed on my own. Scorch was a gentleman then too when I (somewhat embarrassingly) found that out.
So this is a post of thanks to a gentleman, that helped me a lot and to suggest that there are good and honorable folks out there in the gunsmithing business.
Many thanks to you Millard.

tatartot · July 10, 2014, 06:23 PM

Ya it's great of some to step forword.TT

Scorch · July 10, 2014, 11:48 PM

You are welcome! And Thank you, Roger! I do what I can to move the peanut ahead every day, hopefully bettering those I associate with.

July 10, 2014, 05:02 PM	#1
velocette Senior Member Join Date: May 25, 2007 Location: South Florida Posts: 924	Gentleman on this forum +10 Over the past four months I have been communicating with Scorch, a frequent post'er here. I was in the process of building a sporting rifle with a nice stock. Over the four months Scorch patiently answered questions, gave guidance, made suggestions and generally freely gave of his time. His valuable time I might add, as he runs a gunsmithing business. Ultimately it turned out that my project did not need the services of a REAL gunsmith & I was able to proceed on my own. Scorch was a gentleman then too when I (somewhat embarrassingly) found that out. So this is a post of thanks to a gentleman, that helped me a lot and to suggest that there are good and honorable folks out there in the gunsmithing business. Many thanks to you Millard. __________________ Trigger control + Breath control + Sight alignment = Gun Control. http://www.hrpclub.info/ NRA Smallbore Prone Master, High Power Master

July 10, 2014, 11:48 PM	#3
Scorch Senior Member Join Date: February 13, 2006 Location: Washington state Posts: 15,248	You are welcome! And Thank you, Roger! I do what I can to move the peanut ahead every day, hopefully bettering those I associate with. __________________ Never try to educate someone who resists knowledge at all costs. But what do I know? Summit Arms Services

July 10, 2014, 06:23 PM	#2
tatartot Member Join Date: June 26, 2012 Posts: 58	Ya it's great of some to step forword.TT