July 26, 2016, 05:22 PM | #1 |
Senior Member
Join Date: January 11, 2012
Location: Indiana
Posts: 1,059
|
Ruger sight blade
Need Super Blackhawk front sight Blade . I need a taller blade Ruger is saying they do not have anything but the stock it came with ?
Wear to find one |
July 26, 2016, 06:44 PM | #2 |
Senior Member
Join Date: May 31, 2013
Location: East Texas
Posts: 1,705
|
Don't know of anyone making a taller one. I had this problem many years ago and just had a fellow put me a little tig weld on top of mine and I dressed it down to look good and meet the height I needed. Not a big project that way...
|
July 26, 2016, 06:57 PM | #3 | |
Senior Member
Join Date: February 16, 2006
Location: IOWA
Posts: 8,783
|
Just asking !!
Quote:
http://www.midwayusa.com/product/983...ed-green-white Be Safe !!!
__________________
'Fundamental truths' are easy to recognize because they are verified daily through simple observation and thus, require no testing. |
|
July 26, 2016, 06:58 PM | #4 |
Senior Member
Join Date: July 1, 2001
Posts: 6,333
|
What height is it? I had that issue with a Bisley Blackhawk 45 Colt and they sent me a taller sight blade no issue.
|
July 26, 2016, 08:17 PM | #5 |
Senior Member
Join Date: January 11, 2012
Location: Indiana
Posts: 1,059
|
The Ruger a Super Blackhawk three Screw . I had the barrel cut to 4-5/8 and coated the thing Gloss black . The Original sight was reinstalled but shoots high (like 4 inches at 25 yards . I am going to do an older new model Super Blackhawk Stainless the same as this one and the front sight is a removable Blade so I need a taller blade .
I use the Super Blackhawk Three Screw about every day on a backyard plate rack . I run 400 to 500 rounds a week and need two just in case one needs work . The guns will be shot a bunch the reason for the Black Coating and the Stainless . |
July 28, 2016, 10:38 AM | #6 |
Moderator Emeritus
Join Date: April 27, 2013
Location: Ohio
Posts: 1,923
|
The best suggestion is have the top built up with TIG, then reshape it to the correct height.
|
August 3, 2016, 08:08 PM | #7 |
Senior Member
Join Date: January 11, 2012
Location: Indiana
Posts: 1,059
|
Dixie Gunsmithing
Today I had a friend Weld some on the top of the sight . I spent most of the afternoon working it down it looks good . I also put a thin coat of body filler to be sanded tomorrow then painted black . Ended up adding 3/16 I may file it down some but need to shoot it first . |
|
|