November 25, 2011, 07:31 PM | #1 |
Junior Member
Join Date: April 18, 2010
Posts: 4
|
204 powder and loads
The old joints can't take much recoil any more, so thought I'd try the 204.
What do you have for powder and loads that have worked well for you?? |
November 25, 2011, 09:41 PM | #2 | |
Senior Member
Join Date: February 9, 2009
Location: Central Oregun
Posts: 563
|
Quote:
You won't be disapointed with the 204. 12 twist rifle Reloader 10X Midsouth extremes 34 grains 41.00 per 100 Rem 7 1/2 primer, Fed 205M any brass 8208, Varget, Tac, N-140, W-748 all work well but not like R-10X
__________________
"Happiness is knowing the Barred Owl is Eating the Spotted Owl and environmentalists are watching Nature take it's course" |
|
November 25, 2011, 09:46 PM | #3 |
Senior Member
Join Date: November 9, 2005
Location: Ohio, Appalachia's foothills.
Posts: 3,779
|
Good case fill and velocity should steer you in the right direction.
|
November 25, 2011, 09:53 PM | #4 |
Moderator Emeritus
Join Date: June 25, 2008
Location: Austin, CO
Posts: 19,578
|
I use 28.0gr Benchmark under 32gr V-max. This is Hodgdon's max load. It shoots about 1/2 MOA. It also matches real world factory ammo at 4035 fps from a 24" barrel.
QuickLoad predicts that Win748 can reach the advertised claims of 4200 fps from factory velocity. I haven't tried it yet. My computer is broken so I can't give you the expected charges. |
|
|