|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
July 25, 2009, 03:09 PM | #1 |
Member
Join Date: April 23, 2009
Location: Tampa, Florida
Posts: 76
|
Mag Catch Fell off S&W mdl.410
Hi guys my Mag catch nut fell off while at the range today and was wondering what part I need to fix it.
I have a metal magazine catch pin... plastic magazine catch nut... and a magazine catch spring... It looks as if there may have been a plastic O-ring inside the magazine nut that wore out and needs to be replaced. I cannot find an exploded parts diagram for my SW410/411 to determine what I need. Any ideas? I got my concealed weapons permit in the mail yesterday and the mag catch broke today.. what luck.
__________________
Never compromise, never surrender. Last edited by tpareloader; July 25, 2009 at 05:54 PM. |
July 25, 2009, 05:10 PM | #2 |
Member
Join Date: April 23, 2009
Location: Tampa, Florida
Posts: 76
|
Here are some pics to help out with the description.... FYI: The magazine is empty it is just holding the magazine catch pin in place for the photos.
__________________
Never compromise, never surrender. Last edited by tpareloader; July 26, 2009 at 09:13 PM. |
July 26, 2009, 07:00 AM | #3 |
Senior Member
Join Date: June 17, 2009
Location: Rockford IL
Posts: 149
|
Brownells has a schematic of a 410 on their web site.
|
July 27, 2009, 02:43 PM | #4 |
Member
Join Date: April 23, 2009
Location: Tampa, Florida
Posts: 76
|
Thanks for the site TJH3781. I ordered a mag catch nut.. I believe this is what was worn out. We'll see.
__________________
Never compromise, never surrender. |
Thread Tools | Search this Thread |
|
|