The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Reply
 
Thread Tools Search this Thread
Old February 15, 2013, 08:41 PM   #1
Logan5579
Senior Member
 
Join Date: January 9, 2013
Location: Tennessee
Posts: 102
Deal I couldn't pass up

Bought this little 1863 pocket remington today for $125!
Guy had bought it years ago and broke the loading lever with the wrong size balls and decided it was too much trouble to fool with and wanted some cash today more than he wanted to keep the gun...I couldn't pass it up so now I have a pocket pistol to add to my collection

[IMG][/IMG]

The guy said he had shot probably 15 to 20 shots from it before he broke the loading lever. Looking at the gun, you couldn't tell it had ever been fired...perfectly clean inside and out, cylinder indexes properly and the chambers line up right up with the barrel. The action is still a little stiff where it has not been worked much and the bluing factory perfect...except for my grubby fingerprints!

The loading lever is broke where the screw passes through, hard to see in this picture...but I'm gonna have to replace the loading lever with a new one
[IMG][/IMG]

Checked at vtigunparts and they are $50 each and out of stock for 6-10 weeks. But I want to shoot this little guy so I need to call on the experts with a couple of questions. First what size balls do I need for this gun so that I don't break the next loading lever? and second what powder charge should I start with?
__________________
Beware the man with one gun, he knows how to use it
Logan5579 is offline  
Old February 15, 2013, 08:45 PM   #2
4V50 Gary
Staff
 
Join Date: November 2, 1998
Location: Colorado
Posts: 21,824
I would have jumped on it myself. Can that piece be welded?
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe!
4V50 Gary is offline  
Old February 15, 2013, 10:01 PM   #3
Logan5579
Senior Member
 
Join Date: January 9, 2013
Location: Tennessee
Posts: 102
The break is right at the spot I circled, right at the thinnest part of the metal. I'm no welder but my brother in law is, I'll ask him if he can do anything with a part that small...hadn't thought about trying a weld job on it but hey it could save me 50 bucks! Thanks for the idea gary
[IMG][/IMG]
__________________
Beware the man with one gun, he knows how to use it
Logan5579 is offline  
Old February 15, 2013, 10:18 PM   #4
4V50 Gary
Staff
 
Join Date: November 2, 1998
Location: Colorado
Posts: 21,824
Tig weld would be my preferred choice of repair. Followed up with some file work and then some bluing.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe!
4V50 Gary is offline  
Old February 15, 2013, 10:23 PM   #5
Beagle333
Senior Member
 
Join Date: January 7, 2012
Location: Auburn, AL.
Posts: 2,332
That sure is a purdy little pistol. Good buy on it!
__________________
.
.
.
Have a Colt and a smile.
Beagle333 is offline  
Old February 15, 2013, 10:28 PM   #6
Hardcase
Senior Member
 
Join Date: April 14, 2009
Location: Sunny Southern Idaho
Posts: 1,909
Nice little revolver! It should shoot .321 or .322 balls. If you can't find any, try #0 buckshot - it's .320, which is pretty close.

I don't know about a powder charge.
__________________
Well we don't rent pigs and I figure it's better to say it right out front because a man that does like to rent pigs is... he's hard to stop - Gus McCrae
Hardcase is offline  
Old February 15, 2013, 10:48 PM   #7
38superhero
Senior Member
 
Join Date: November 17, 2007
Posts: 561
That is cool..
38superhero is offline  
Old February 16, 2013, 05:44 AM   #8
Doc Hoy
Senior Member
 
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
Hardcase and Gary + 1

.321 or 2 balls.

I'd have given 125.00 for it.

It is tempting to think that the easily available .315 would work.

But they are too small.
__________________
Seek truth. Relax. Take a breath.
Doc Hoy is offline  
Old February 16, 2013, 09:10 AM   #9
Logan5579
Senior Member
 
Join Date: January 9, 2013
Location: Tennessee
Posts: 102
I was at first thinking about the .315 balls at cabelas, good thing I didn't get in a hurry and order them.
I did find these .320 balls at dixie:
http://www.dixiegunworks.com/product...bohniproe59ol3
Looks like TOW has a couple of options too:
http://www.trackofthewolf.com/Catego...1/1/BALL-320-X
I'll check the local GS today and see if he just happens to have any .320-.322 balls or some #0 buckshot, if not I'll be ordering from somewhere soon.
__________________
Beware the man with one gun, he knows how to use it
Logan5579 is offline  
Old February 16, 2013, 10:16 AM   #10
deerslayer303
Senior Member
 
Join Date: January 10, 2011
Location: Leesville SC
Posts: 2,652
Great buy on that one!, let me know how it does and how it shoots. I'm really wanting to get one!
__________________
"I prefer dangerous freedom over peaceful slavery."
- Thomas Jefferson
deerslayer303 is offline  
Old February 16, 2013, 11:32 AM   #11
woodnbow
Senior Member
 
Join Date: December 2, 2012
Posts: 190
Your BIL may not be the guy to weld that part but a good pistolsmith should be able to handle the job. Nice find!
woodnbow is offline  
Old February 16, 2013, 12:03 PM   #12
Logan5579
Senior Member
 
Join Date: January 9, 2013
Location: Tennessee
Posts: 102
^ ^ ^ woodnbow,
I called my BIL this morning and he said that he can't do anything with a part that small, he was trained to weld big stuff like pipes. He said he probably wouldn't tear it up any worse but he wouldn't be able to fix it either. I know a local gunsmith I'll check with next week and see what he says about a cheap fix.

I've been thinking about a super simple set up like this:

http://thefiringline.com/forums/showthread.php?t=435223

I'm thinking fill the chamber nearly to the rim with pyro p and seat the balls with that neat little setup and that should leave no air pockets as long as I fill the chamber so the balls set on the powder before cranking them home?

Thoughts?
__________________
Beware the man with one gun, he knows how to use it
Logan5579 is offline  
Old February 16, 2013, 12:12 PM   #13
OEF-Vet
Senior Member
 
Join Date: October 23, 2011
Location: Backwoods, PA
Posts: 284
That is a nice little piece.
I would not have passed it up at that price either. As others have said it could be repaired by a competent smith but the cost may or may not equal the cost of a new lever. I think if the choice was mine I would want to have the original repaired. Keep us posted on your venture.
__________________
Jim

"If a man does his best, what else is there?"
- General George S. Patton Jr
OEF-Vet is offline  
Old February 16, 2013, 12:29 PM   #14
robhof
Senior Member
 
Join Date: September 16, 2007
Posts: 712
robhof

Great price for a great little gun, those .31's are a hoot to shoot. I've got the Colt clone and it takes .320 balls and the buckshot is usually harder than pure lead so harder to ram. Give us a range report. Start close to the target as mine at least shoots about a foot high at 20'.
robhof is offline  
Old February 16, 2013, 01:11 PM   #15
woodnbow
Senior Member
 
Join Date: December 2, 2012
Posts: 190
I'd most likely build that little loader, I've got all the parts I'd need in my shop, I'll bet you do too... that way you can shoot while you're waiting for your smith to fix the loading lever properly! Win-win!!
woodnbow is offline  
Old February 16, 2013, 02:53 PM   #16
Logan5579
Senior Member
 
Join Date: January 9, 2013
Location: Tennessee
Posts: 102
I'm definitely going to build a loader like smokin joes (thats about the coolest gizmo I've seen, and all I need is a trip to the hardware store for a proper sized washer). Next week I'll check into getting the original rammer fixed if it costs less than a new one. If that loading setup seats the balls properly (and it really looks like it would) I most likely won't be using the onboard rammer for anything but keeping the cylinder pin in place. Really is a win - win!

Now I just gotta get some lead on order and I'll be in business with this neat little monster. I couldn't be happier with the price for basically a new in the box gun! I looked up the pistol at taylors and they have it for $338!
http://www.taylorsfirearms.com/black...eel-frame.html
E.M.F - $295
http://www.emf-company.com/store/pc/...ngton-c297.htm
Midway - $299.99 for a brass frame
http://www.midwayusa.com/product/190...-2-barrel-blue
I was in the right place at the right time, for a change
Definitely will post a range report after I get to run a few through this guy, I expect that these guns were meant to be used up close and personal so I'm curious to know where it puts lead at any distance past arms length.
__________________
Beware the man with one gun, he knows how to use it
Logan5579 is offline  
Old February 16, 2013, 09:02 PM   #17
deerslayer303
Senior Member
 
Join Date: January 10, 2011
Location: Leesville SC
Posts: 2,652
.322 round ball? I didn't see where Lee or Lyman makes a mold in that diameter?
__________________
"I prefer dangerous freedom over peaceful slavery."
- Thomas Jefferson
deerslayer303 is offline  
Old February 16, 2013, 09:34 PM   #18
Shotput79
Senior Member
 
Join Date: March 20, 2011
Location: NC
Posts: 186
Looks like you got a good deal Logan. That is a neat little pistol. You should be able to get it up and running in no time.
Shotput79 is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:50 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.07136 seconds with 10 queries