The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Reply
 
Thread Tools Search this Thread
Old December 13, 2014, 11:09 PM   #1
jmwenzel87
Junior Member
 
Join Date: December 13, 2014
Posts: 4
Good basic weapon service kit.

Just looking for some advice on a good, basic weapon service kit to issue to a police officer. I have a pretty good idea of what I want in the kit, but I don't think it hurts to get a second opinion. They will need the ability to clean a service pistol and shotgun. If it makes much difference, the pistol is a Glock 22 and Remington 870. I hope to get your opinions on things like brush brands, rod brands, and patch preferences. I'd like to stay away from anything super cheap. Value is great, but cheap is worthless. I'm fairly certain of the lubricant and solvent I'll be choosing for the kit. Any and all opinions are welcome. I won't disclose very much information about the department however, but welcome any questions.

I'm looking for something similar to this but with your preferred brands, unless the brand doesn't matter. (e.g. paper towels, cotton swabs, pipe cleaners, etc.)

Solvent
Lubricant
Rod (pistol and shotgun or combination)
Jags and Patch holders
Patches
Cotton Swabs
and so on...


Again, thanks for all help. All advice will be considered and appreciated!
jmwenzel87 is offline  
Old December 14, 2014, 10:19 AM   #2
Nathan
Senior Member
 
Join Date: July 1, 2001
Posts: 6,285
I would get a pistol and shotgun rod. Not sure brand matters.

I would get a jag and brush for each.

For lube, I would get a bottle of Weaponshield.

Solvent???? Not sure what is best for these 2.
Nathan is offline  
Old December 14, 2014, 12:41 PM   #3
Snyper
Senior Member
 
Join Date: December 16, 2013
Location: Eastern NC
Posts: 3,047
Here's one that will do it all for just $29.99:
http://www.walmart.com/ip/Gun-Master...m-Case/4939699

Or another option is get sectional rods and the needed brushes and pack them in a small tool or fishing tackle box

I prefer the tackle box due to the sections provided for small pieces and the lower area for larger items such as assorted screwdrivers

I wouldn't worry about a "shotgun rod" since shotgun barrels seldom need scrubbing like rifled barrels, and almost never need cleaning "in the field"

A light wiping will take care of the shotguns 99% of the time.

The best thing to use for that is a "Tico Tool"
They work great and will last a lifetime:

http://www.outers-guncare.com/produc...ticotools.aspx
__________________
One shot, one kill
Snyper is offline  
Old December 14, 2014, 11:54 PM   #4
jmwenzel87
Junior Member
 
Join Date: December 13, 2014
Posts: 4
Exactly

This is exactly the kind of stuff I was looking for. I have never heard of the Tico Tool and I look forward to trying it. Thanks!
jmwenzel87 is offline  
Old December 15, 2014, 11:11 AM   #5
WV_gunner
Senior Member
 
Join Date: December 14, 2011
Location: WV
Posts: 938
I just use Remington kit that uses cables instead of rods. Maybe not the best setup but I like it. I use it for everything from .22 to 10 gauge.
WV_gunner is offline  
Old December 15, 2014, 04:39 PM   #6
Snyper
Senior Member
 
Join Date: December 16, 2013
Location: Eastern NC
Posts: 3,047
Quote:
I just use Remington kit that uses cables instead of rods.
Pull-through devices are good until you get a stuck case or a barrel obstruction that needs to be pushed out

They do have the advantage of fitting in a pocket
__________________
One shot, one kill
Snyper is offline  
Old December 15, 2014, 04:42 PM   #7
jmwenzel87
Junior Member
 
Join Date: December 13, 2014
Posts: 4
I like the pull throughs. I have an Otis and a couple of different sizes of bore snakes. What we're looking for and what has more or less been approved is the "standard" cleaning kit with rods and patches. I think this is mostly due to the fact that it's the method that's still taught in the academy during firearms block.
jmwenzel87 is offline  
Old December 17, 2014, 12:13 AM   #8
DocUSMCRetired
Member
 
Join Date: November 22, 2014
Location: Texas
Posts: 63
Boretech. Their cleaners are great, no fumes, all non toxic so safe around kids. They also have great rods, you want something that is not going to catch debris. A bore guide is helpful. I would also buy bore snakes. They don't hurt your rifle, I have used them in my competition rifles and handguns and they still shoot perfect. They are good for in the field when you need a quick field cleaning to get back in to tight groups.

btw Boretech is made in America as well.
__________________
Doc Beech
Applied Ballistics Support
www.Appliedballisticsllc.com
DocUSMCRetired is offline  
Reply

Tags
brand , cleaning gear , list , opinion , police

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:42 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.11321 seconds with 8 queries