The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools Search this Thread
Old February 9, 2012, 01:29 PM   #1
Longdayjake
Senior Member
 
Join Date: August 11, 2009
Posts: 619
A comparison between Dillon 650 and Hornadly LNL AP from a guy who owns both

Okay, so I own about 3k worth of reloading equipment and heaven knows I will never make or shoot enough ammo to make up my costs. I collect presses kind of the same way many of us here collect guns. I like to see how they work and how they feel and what I can do with each one. Anyway, I own two Hornady LNL AP presses that have been upgraded to the new EZject system. I recently bought a used Dillon XL650 that came with complete tool heads for 45, 40, 9mm, and .357. Each toolhead has the dies, powder measure, and powder check system. It also came with about 30 primer pickup tubes (which is cool because they work with both the Dillon and Hornady press).

So, after loading about 10k rounds on the Hornadys and this weekend I loaded my first 1000 on the Dillon I have a few impressions about the two I would like to share to guys looking at buying either one of the presses.

First off let me start by saying that the Dillon has a case feeder and I have yet to get one for the Hornadys so I can't really compare how many can be made in an hour or what not. All I am comparing in this is ease of operation and value.

So, the question you all want me to answer is this -Which one is better? Well, I must admit that they both have their pluses and minuses so let me tell you about what I like better about each machine.

Primer Feed: Well, there are things about both primer feeds that I don't like. The Hornady primer feed is easily mucked up with powder or brass shavings. This can throw off the primer feed and cause a stoppage or difficult seating. Also, with some brands of primers the primer feed will refuse to work at all so that is a major downside. I have since started using CCI primers exclusively and I haven't had any primer problems for years so for me the Hornady primer feed has been awesome. I actually prefer the Hornady to the Dillon. The Dillon primer feed works fine for me but I don't really like that you can't stop the primer feed on a Dillon. If you pull the handle, a primer is rotated and you have to pick it up and put it back in the tube. This would be fine if I never got a stoppage, but I did. Maybe the stoppages will get fewer as I load more on the Dillon so its not a huge deal. The two priming systems are vastly different. The Dillon takes a little more time to setup than the Hornady but I think it has the potential to be more reliable and cause less stoppages so the setup time might be made up in less time fiddling with it. However, I feel the Hornady is easier to troubleshoot if there is a problem.

The case retention system is clearly superior on the Hornady. If there is a problem during the process, it is much easier to remove and replace a casing on the Hornady system. The case retaining spring on the Hornady easily moves out of the way whereas the pins on the Dillon need to be pulled out and put back in. I spent about three minutes looking for one pin after I dropped it on my messy garage floor.

It is possible to double charge on both presses. The problem with the Hornady press (a problem that I know has blown up at least two guns) is that in the chance that the decapping pin pulls a primer half way back up into the primer pocket the Hornady press will bind up. The only way to fix that problem is to pull the handle again to push the primer all the way out. Well, if you pull the handle twice on the same station that means you get double the powder charge on the next station. A new reloader may be distracted by the decapping stage and may forget to check the powder stage. KABOOM. This is less likely to happen with the Dillon because it will allow a half primed casing to spin around on the press without binding. The primer stage will just reset the used primer. This is kind of annoying because you will get a loaded round with a used primer. The only way I found to avoid this on both presses is to use the Dillon spring loaded sizing/decapping die.

I definately like the way the Dillon flares on the powder station. However, I think the Dillon powder measure leaves a lot to be desired. It is much more time consuming to set up than the Hornady and its jumpy and rough working. That said, it appears to work just as well as the Hornady and though I don't load trail boss I hear it does a better job than Hornady measures with Trail Boss. I have yet to try it with stick powders but my guess is that neither measure will do an excellent job with it. I know that the Hornady Measure doesn't do too well with stick powders.

The Hornady system for spent primers is far superior. I'm still trying to figure out how to rig up something for the Dillon that will work well. The cup just sucks.

I think the ejection system for the Dillon is better. I have had issues with the EZ ject system not doing a perfect job and so far the Dillon wire has been flawless.

I like how much easier it is to seat primers on the Dillon. However, I have noticed that it is harder to tell when the primers aren't quite lined up and I get a few smashed primers on the Dillon. The Hornady takes a little more force to seat a primer but it is easier to feel when things aren't quite lined up right.

I really wish I could compare the case feeders because I found the Dillon case feeder to be a pain in the butt to set up. It does seem to feed perfectly every time though.

I prefer the Hornady bushings over the Dillon tool heads. I don't like having the tool heads taking up a ton of space on the bench. I can put the dies and bushings inside a die box and store them that way. Its just less clutter.

Both Hornady and Dillon have excellent customer service.

This isn't really about the press, but the Dillon sizing/decapping die is FAR superior to any other that I have tried.

So, here is my final evaluation. The Dillon is a great press with awesome customer service. You should not feel bad about owning a Dillon if you own one and you shouldn't hesitate to get one if you can afford it. That said, I feel that the Hornady press is a better value. It's much cheaper to get the full Hornady setup plus you get free bullets. My biggest complaint about the Dillon is that it has many more parts and it just takes more time to set up. Both presses can pump out ammunition once you learn each press's particular nuances. If I were to compare the presses to handguns I would say that the Dillon is like a 1911. It is proven, accurate, expensive, and beautiful but it can be a pain in the butt to take down and put back together. The Hornady is like a Glock. It is simple, easy to use, relatively cheap, and it just works.

If you are thinking about getting a progressive press, don't let the Dillon naysayers sway you from the value of the Hornady. It will work just as well as the Dillon (this statement is based on the assumption that the Hornady case feeder works). That said, if you have the money I think the Dillon may potentially be able to go longer without a stoppage. One thing is for sure. Both presses have their headaches.
__________________
If you need bullets for reloading give my website a look.
www.rmrbullets.com
Longdayjake is offline  
Old February 9, 2012, 03:23 PM   #2
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,723
Thanks for an objective review minus the typical red vs. blue bashing.
__________________
NRA Benefactor Life Member
NRA Certified Instructor: Rifle, Pistol, Shotgun, PPIH, Metallic & Shotgun Shell Reloading; RSO
Pemigewasset Valley Fish & Game Club
FlyFish is offline  
Old February 10, 2012, 11:40 AM   #3
totaldla
Senior Member
 
Join Date: August 10, 2009
Location: SW Idaho
Posts: 1,280
I want to thank you for articulating how a double-charge can happen on a Hornady. I think it is very important for folks to understand the dangerous sequences - so they know what to look for.

I hate it when priming systems are sensitive to the primer type, but that seems the norm. My Dillon likes Winchester better than CCI for some reason.
totaldla is offline  
Old February 10, 2012, 05:31 PM   #4
serf 'rett
Senior Member
 
Join Date: June 25, 2009
Location: Stuttgart, AR
Posts: 1,569
While I suspect a progressive is still somewhere on my distant horizon, I'm certainly glad to see these types of reviews.
__________________
A lack of planning on your part does not necessarily constitute an emergency on my part.
serf 'rett is offline  
Old February 10, 2012, 09:04 PM   #5
Crunchy Frog
Senior Member
 
Join Date: December 26, 2008
Location: Greenville, SC
Posts: 591
Nothing like an evaluation from a consumer who has worked both products. Thanks for posting.

As regards double charged cases: When I shopped for a progressive press I decided to get a five station press so that I could mount a powder check or powder stop die for an extra measure of safety. I ended up buying the Hornady LNL-AP.

Spent a few bucks more for the RCBS Lockout Die. Unlike the RCBS powder check die or Hornady's Powder Cop die, both of which rely on the operator to watch the level of the little rod, the Lockout Die will automatically stop the press if it detects and undercharged or overcharged case. Money well spent in my opinion.
Crunchy Frog is offline  
Old February 10, 2012, 09:29 PM   #6
Waldog
Senior Member
 
Join Date: March 28, 2007
Location: SOCAL
Posts: 359
LONGDAYJAKE. Nice comparison. You are a brave man. This same topic was discussed not too long ago. http://thefiringline.com/forums/showthread.php?t=460533
__________________
I am the Christian Conservative that CNN warned you about!!

“Socialism is the philosophy of failure, the creed of ignorance and the gospel of envy.”
Winston Churchill
Waldog is offline  
Old February 10, 2012, 10:13 PM   #7
Longdayjake
Senior Member
 
Join Date: August 11, 2009
Posts: 619
Well, I didn't write the review to say that one was better than the other. I just wrote it to show how the two different presses work or don't work for me.

I am having an issue with the Dillon right now that is kind of getting me annoyed. It keeps crushing primers kinda sideways in the primer pocket. I don't know what to adjust to stop this but it seems to happen once every 20 or so rounds I make.
__________________
If you need bullets for reloading give my website a look.
www.rmrbullets.com
Longdayjake is offline  
Old February 11, 2012, 11:02 AM   #8
totaldla
Senior Member
 
Join Date: August 10, 2009
Location: SW Idaho
Posts: 1,280
Make sure the dillon is at room temperature and make sure that there's no crud on the primer ram.
totaldla is offline  
Old February 11, 2012, 11:19 AM   #9
m&p45acp10+1
Senior Member
 
Join Date: May 3, 2009
Location: Central Texas
Posts: 3,930
Jake I know both are great presses. I am sure you would trade one for an automatic diaper change without hesatation though.
__________________
No matter how many times you do it and nothing happens it only takes something going wrong one time to kill you.
m&p45acp10+1 is offline  
Old February 12, 2012, 10:45 AM   #10
FatWhiteMan
Member
 
Join Date: June 10, 2007
Location: Appalachia
Posts: 96
My dream press would by a Hornady LNL AP or a Dillon 650 that accepted RCBS APS primer strips. They are far superior, and probably safer, than pick up tubes IMHO.
FatWhiteMan is offline  
Old February 15, 2012, 03:04 PM   #11
Longdayjake
Senior Member
 
Join Date: August 11, 2009
Posts: 619
Yeah but you still have to load the strips. Kind of a PITA.
__________________
If you need bullets for reloading give my website a look.
www.rmrbullets.com
Longdayjake is offline  
Old February 15, 2012, 08:18 PM   #12
jmorris
Senior Member
 
Join Date: November 22, 2006
Posts: 3,076
Jake, if you can't figure out the Dillon primer issue, I have a NIB LNL I'll swap you for it.
jmorris is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:23 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.05065 seconds with 10 queries