The Firing Line Forums

Go Back   The Firing Line Forums > The Conference Center > General Discussion Forum

Reply
 
Thread Tools Search this Thread
Old April 20, 2018, 09:12 AM   #1
FoghornLeghorn
Senior Member
 
Join Date: September 2, 2011
Posts: 960
When you fondle your collection...

...what do you do to protect it from fingerprints? I use silicon impregnated cloths, one on each hand. Pretty much the only time I touch a firearm with my bare hand is if it's a Sig or Glock with wraparound rubber grip or if I'm headed to the range.

I've seen videos of gun museum employees wearing white gloves. Are these simply military parade type gloves? Source?
FoghornLeghorn is offline  
Old April 20, 2018, 09:21 AM   #2
Evan Thomas
Senior Member
 
Join Date: July 7, 2008
Location: Upper midwest
Posts: 5,631
Museums get them from -- wait for it -- museum supply companies.

Like this one, which is around the corner from me. They have all sorts of good stuff.

http://museumservicescorporation.myb...-and-handling/

Or you could google "white cotton gloves"...
__________________
Never let anything mechanical know you're in a hurry.
Evan Thomas is offline  
Old April 20, 2018, 09:25 AM   #3
JohnKSa
Staff
 
Join Date: February 12, 2001
Location: DFW Area
Posts: 24,954
Rubber/latex/nitrile gloves will leave fingerprint marks, there just won't be any sweat/salt/water in the marks.

Cotton gloves won't leave any marks unless there is an oil layer on the gun and they smudge/dry it where they touch it.

When I handle my guns, I just handle them--I don't use gloves. If the guns are blued, I do try to avoid touching the metal and handle them by the grips/stock.

Sometimes I will go rinse my hands and dry them first to make sure there's no salt/sweat on them.

If I do touch a blued finish and I think there's a chance that my hands were sweaty/salty, I just wipe down the finish with a silicone rag or something similar.

Then again, I don't have any collectors items or unusually rare/valuable guns. I might take a different approach if things were different in that respect.
__________________
Do you know about the TEXAS State Rifle Association?
JohnKSa is offline  
Old April 20, 2018, 09:39 AM   #4
turkeestalker
Senior Member
 
Join Date: February 2, 2015
Location: Cottleville, Missouri
Posts: 1,115
I don’t typically worry about it, just wipe them all down periodically.
I will admit that maybe I should looking at the lever on a little Henry .22 a couple of months after a friend of my oldest son handled it.
God love the kid but he’s kind of one of those little greasy kids and it pretty well ruined the bluing, luckily only on the lever.
I kind of wanted to order one of the large loop levers for it anyway.
__________________
Vegetarian... primitive word for lousy hunter!
turkeestalker is offline  
Old April 20, 2018, 09:47 AM   #5
chadio
Senior Member
 
Join Date: June 29, 2011
Posts: 931
Most of my collection is in 'excellent' shape in my estimation.

But (and that's a really big butt)

My brother and I agree, my second-hand, older, holster-worn P226 is cooler than a new, perfect one ... if those wear marks could talk...
__________________
Ex - Navy, Persian Gulf Veteran. Loved shooting the M14, 1911, M60, M2
chadio is offline  
Old April 20, 2018, 10:00 AM   #6
FoghornLeghorn
Senior Member
 
Join Date: September 2, 2011
Posts: 960
Quote:
Or you could google "white cotton gloves"...
Hence, my question to the forum. Google is not always accurate. Or reliable.

Like, when I ordered my jeans that were advertised as 100% cotton. When I got them they were 50% synthetic.

I'll just stick to my current protocol, viz. not touch the blued firearms unless I'm using silicone cloths.

Quote:
I don't have any collectors items or unusually rare/valuable guns.
If by rare you're talking about guns like the Colt Walker that just sold for $1.8 million, no, I don't have any rare guns either.

My rarest piece is the S&W 25-2 of 1955. It was one of the lot that S&W had a batch of mismarked barrels and S&W was too frugal to throw them away, so they put them on the 25-2 frames. The barrels are marked "model of 1950."

That's maybe the "rarest" piece I've got. But I don't think it's all that "rare."
FoghornLeghorn is offline  
Old April 20, 2018, 10:21 AM   #7
Rembrandt
Senior Member
 
Join Date: August 10, 2002
Posts: 2,108
In the country we use yellow farm chore gloves soaked in motor oil.

Rembrandt is offline  
Old April 20, 2018, 11:03 AM   #8
Metal god
Senior Member
 
Join Date: April 10, 2012
Location: San Diego CA
Posts: 6,872
None of my firearms are museum quality so I don't "sweat" it . I did for many years but don't any more . My most commonly used and or touched firearms are either SS , Nitride or have some other anti corrosion coating on them .

Either way I handle my firearms bare handed and just wipe them down before putting them away . Now I do use a special rag to whip them down with . I keep and use and old gun cleaning rag to whip down my guns before putting them back in the safe . This rag has years of multiple gun oils on it and is just a tad moist to the touch .

On the other had if I handle and or shoot a firearm that I know will not be used again for many months or even years , that's a different story . In that case they get a deep cleaning and then practically drenched in either

Corrosion X https://www.amazon.com/Corrosion-X-C...ords=corrosion

Hornady Oneshot HD Extreme https://www.amazon.com/Hornady-99936...neshot+extreme

WD-40 Specialist https://www.amazon.com/WD-40-300038-...d40+specialist

And that's how I handle the issue . It doesn't hurt that my safe stays a consistent 70 degrees @ 40% humidity . I believe that's right around perfect but think 50% humidity is best .
__________________
If Jesus had a gun , he'd probably still be alive !

I almost always write my posts regardless of content in a jovial manor and intent . If that's not how you took it , please try again .
Metal god is offline  
Old April 20, 2018, 03:09 PM   #9
turkeestalker
Senior Member
 
Join Date: February 2, 2015
Location: Cottleville, Missouri
Posts: 1,115
Large pill bottle with a small automotive chamois rolled up in it that is lightly saturated with WD-40.
I've got a few of those around in different spots for the periodic wipe down.
I know I know... but I believe in the stuff and it hasn't failed me yet.
__________________
Vegetarian... primitive word for lousy hunter!
turkeestalker is offline  
Old April 20, 2018, 03:40 PM   #10
TXAZ
Senior Member
 
Join Date: September 5, 2010
Location: McMurdo Sound Texas
Posts: 4,322
Cerakote on the .50, a wipedown once in a while.
Light oil on the rest after a cleaning.

Otherwise, no other special treatment.
__________________

Cave illos in guns et backhoes
TXAZ is offline  
Old April 20, 2018, 08:53 PM   #11
FrankenMauser
Senior Member
 
Join Date: August 25, 2008
Location: In the valley above the plain
Posts: 13,417
If I'm just fondling it to fondle it, and won't be doing anything with it any time soon, I avoid touching metal.

Otherwise, or if I reach the point of, "I've messed with too many of these lately, I need to wipe everything down again," I grab the closest appropriate option.
There's a (bagged) silicone rag on top of one of the safes.
There's a Hoppe's #9 rag somewhere with the cleaning supplies.
And I have both RemOil wipes and Slip 2000 (EWL?) wipes available if I really want to leave an oil residue.
__________________
Don't even try it. It's even worse than the internet would lead you to believe.
FrankenMauser is offline  
Old April 21, 2018, 06:43 AM   #12
RETG
Senior Member
 
Join Date: September 22, 2009
Location: Somewhere in Idaho, near WY
Posts: 507
Fondle a gun? Do people actually fondle guns?
__________________
I give MY OPINION (not often) based on many years shooting at, other than paper targets. I will not debate my experience vs. your experience based on dreams and "what ifs." I'm 73; I'm too damn old to care.
RETG is offline  
Old April 21, 2018, 01:34 PM   #13
T. O'Heir
Senior Member
 
Join Date: February 13, 2002
Location: Canada
Posts: 12,453
Museum employees wearing white gloves are handling irreplaceable collector grade firearms. Not a Sig or a Glock, both of which have protective finishes.
Anyway, unless your hide oils are particularly caustic, you have nothing to worry about. Your firearms are not going to dissolve or instantly rust because you touch 'em.
__________________
Spelling and grammar count!
T. O'Heir is offline  
Old April 21, 2018, 02:00 PM   #14
osbornk
Senior Member
 
Join Date: August 11, 2012
Location: Mountains of Appalachia
Posts: 1,598
I don't do anything special other than I rub them down occasionally with a slightly oily rag. They seem to do just fine but my oldest one is only 70 years old.
osbornk is offline  
Old April 21, 2018, 02:22 PM   #15
Reloadron
Senior Member
 
Join Date: June 8, 2016
Location: Cleveland, Ohio Suburbs
Posts: 1,750
I've seen videos of gun museum employees wearing white gloves. Are these simply military parade type gloves? Source?

No, they are not military parade type gloves but rather light to medium weight plain cotton gloves. Just about any industrial supplier should have them, for example McMaster Carr or similar. You wear them a few times and trash them. In industry they are worn for handling things like precision gauge blocks and weights. They are also very inexpensive. Heck you can likely find them at your local drug store in addition to latex gloves and similar.

Ron
Reloadron is offline  
Old April 21, 2018, 05:04 PM   #16
cslinger
Senior Member
 
Join Date: July 14, 2002
Location: Nashville, TN
Posts: 2,045
i keep a lightly oiled rag around and simply give them a quick wipe down before going into the safe. Carry guns are no different, a quick wipe every day. Never any problems or issues to be had.
__________________
"Is there anyway I can write my local gun store off on my taxes as dependents?"
cslinger is offline  
Old April 21, 2018, 10:39 PM   #17
3Crows
Senior Member
 
Join Date: December 24, 2017
Location: Wichita, Kansas
Posts: 220
Lightly oil gun cloth, with an accumulated collection of oils, greases and who knows what, wipe them down after handling. Geeez, this why I love stainless steel and hardly buy anything not stainless and I wipe them down also. Years of guarding blued guns from rust in humidity or soaking in a rain, who needs all that fuss.
3Crows is offline  
Old April 22, 2018, 08:13 AM   #18
Minorcan
Senior Member
 
Join Date: September 15, 2015
Posts: 379
After I fondle my treasures I load em up go to the range and throw some copper jacketed lead with em. The burnt powder usually covers up the finger prints. If not, I throw some more lead. It covers the finger prints long enough for me to get home, clean em up and back in the safe they go.
Minorcan is offline  
Old April 22, 2018, 09:47 AM   #19
pete2
Senior Member
 
Join Date: May 15, 2012
Location: Texas
Posts: 2,566
If it's a blued gun I wipe it with a silicone rag or oily rag every time it's handled. If you don't it'll rust. Some, maybe most, of the newer finishes don't seem as likely to rust as the nice pretty blued guns.
I keep a gun wiping cloth on top of the safe, the gun is wiped off before placing it back in the safe.
pete2 is offline  
Old April 22, 2018, 09:55 AM   #20
Jim Watson
Senior Member
 
Join Date: October 25, 2001
Location: Alabama
Posts: 18,521
I don't fondle my collection. Actually, I don't have a collection; I sold off the unusual stuff and kept the shooters.

I dryfire and gymnasticate my firearms for practice in shooting and operating. I then wipe them with a cloth that has a bit of every lubricant that has passed through the shop.
Jim Watson is offline  
Old May 10, 2018, 07:54 PM   #21
FoghornLeghorn
Senior Member
 
Join Date: September 2, 2011
Posts: 960
Quote:
Actually, I don't have a collection; I sold off the unusual stuff and kept the shooters.
And I'm guessing among your "shooters", there are many that a lot of us would consider "collectibles."
FoghornLeghorn is offline  
Old May 10, 2018, 08:57 PM   #22
stephen426
Senior Member
 
Join Date: March 11, 2005
Posts: 3,840
I have a few guns that haven't been able to bring myself to shoot yet. I always give them a good wipe down with a silicone oiled cloth and have yet to have problems.
__________________
The ATF should be a convenience store instead of a government agency!
stephen426 is offline  
Old May 11, 2018, 09:20 AM   #23
pete2
Senior Member
 
Join Date: May 15, 2012
Location: Texas
Posts: 2,566
How do you stand it? to have a gun and not shoot it. I try my best to shoot a new gun the day I get it. Had to wait a day or 2 to shoot a new Valkyrie, almost did me in.
pete2 is offline  
Old May 11, 2018, 03:07 PM   #24
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 15,248
As a gunsmith, I "fondle" a lot of guns after they have been refinished. On my bench is a 6"x9" sheepskin wall painting pad as sold by Home Depot or Lowes, only mine is soaked in Militec. My older sheepskin, as sold by Brownells, is coated with Outers Gun Grease. When I do fondle any guns, as I am wont to do occasionally, a quick wipe-down with the sheepskin works wonders. Never had a rust issue. Are there other things that work as well? Sure, but nothing I have ever seen worked any better.
Quote:
my oldest one is only 70 years old
Man, I have a whole slew of guns older than that. My oldest is 140+ years old.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Scorch is offline  
Old May 14, 2018, 11:12 AM   #25
Skans
Senior Member
 
Join Date: November 20, 2008
Posts: 11,132
I use Johnson's paste wax, as opposed to oil, on the finishes of my guns. It eliminates most problems from fingerprints.
Skans is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:12 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.12597 seconds with 10 queries