Lyman Tang sight on Marlin 336Cowboy

Cheese Man · February 5, 2000, 01:05 PM

Does anybody have any experience with the above mentioned sight on a Marlin lever of any kind? I've been told if I load up a hunting load for the gun, the sight will bite my hand.
Any help will be appreciated.

Cheese Man

------------------
" IF YOU CAN'T HIT IT WITH SIX SHOTS, USE A CLUB!"

Art Eatman · February 5, 2000, 06:10 PM

Don't put your thumb across the sight when firing.

slabsides · February 6, 2000, 09:57 AM

I've always seen the tang sight as an accessory suitable only for very deliberate target panning. It interferes with a normal grip on the small of the stock; with the movement of the bolt, and is an invitation to eye injury if the arm is quickly shouldered without care or has heavy recoil. They are also a nuisance to adjust, often requiring shims to achieve proper windage. Lever actions do very well with receiver peep sights. I prefer to leave the tang style rear sight to the Creedmore shooters.
slabsides

Dave McC · February 6, 2000, 02:25 PM

I'd go for a receiver peep myself. But I may be biased, there's 7 guns here suitable for deer hunting and 5 of them have peep sights, including a coupla 870s.

Did have a tang site on a muzzleloader and a replica of a Rolling Block in 45-70. Don't recall hunting much with them tho.

Cheese Man · February 7, 2000, 04:02 PM

Gents,
Thanks, the general consensis seems to be forget the tang sight. I'm looking at peep sights now.

Cheese Man

------------------
" IF YOU CAN'T HIT IT WITH SIX SHOTS, USE A CLUB!"

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

February 5, 2000, 01:05 PM	#1
Cheese Man Junior Member Join Date: February 4, 2000 Posts: 14	Does anybody have any experience with the above mentioned sight on a Marlin lever of any kind? I've been told if I load up a hunting load for the gun, the sight will bite my hand. Any help will be appreciated. Cheese Man ------------------ " IF YOU CAN'T HIT IT WITH SIX SHOTS, USE A CLUB!"

February 5, 2000, 06:10 PM	#2
Art Eatman Staff in Memoriam Join Date: November 13, 1998 Location: Terlingua, TX; Thomasville, GA Posts: 24,798	Don't put your thumb across the sight when firing.

February 6, 2000, 09:57 AM	#3
slabsides Member In Memoriam Join Date: May 27, 1999 Location: Maine Posts: 614	I've always seen the tang sight as an accessory suitable only for very deliberate target panning. It interferes with a normal grip on the small of the stock; with the movement of the bolt, and is an invitation to eye injury if the arm is quickly shouldered without care or has heavy recoil. They are also a nuisance to adjust, often requiring shims to achieve proper windage. Lever actions do very well with receiver peep sights. I prefer to leave the tang style rear sight to the Creedmore shooters. slabsides

February 6, 2000, 02:25 PM	#4
Dave McC Staff In Memoriam Join Date: October 13, 1999 Location: Columbia, Md, USA Posts: 8,811	I'd go for a receiver peep myself. But I may be biased, there's 7 guns here suitable for deer hunting and 5 of them have peep sights, including a coupla 870s. Did have a tang site on a muzzleloader and a replica of a Rolling Block in 45-70. Don't recall hunting much with them tho.

February 7, 2000, 04:02 PM	#5
Cheese Man Junior Member Join Date: February 4, 2000 Posts: 14	Gents, Thanks, the general consensis seems to be forget the tang sight. I'm looking at peep sights now. Cheese Man ------------------ " IF YOU CAN'T HIT IT WITH SIX SHOTS, USE A CLUB!"