EOTech QD mount from Larue

mitranoc · January 28, 2013, 10:07 PM

Considering the LT110 QD mount for my XPS2. Interested in knowing if raising the optic .275" will make much of a cheekweld difference?

Ridge_Runner_5 · January 28, 2013, 11:58 PM

Not much of a difference in cheek weld. Especially since the reticle will move with your head. It will move your absolute cowitness to a lower 1/3rd.

Technosavant · January 29, 2013, 10:09 AM

Yeah, with modern CQB optics like EOTech and Aimpoint, you aren't needing a cheek weld, you just need to see the reticle. Mounting the optic slightly higher for a lower 1/3 cowitness can help keep your head more upright, potentially making things more comfortable for you as well as maybe speeding things up a bit.

I have Aimpoints, but I do prefer the lower 1/3 cowitness to absolute.

mitranoc · January 29, 2013, 10:22 AM

That might be the way to go. Plus there's enough room on the mount to put a magnifier behind the RDS.

loose_holster_dan · January 29, 2013, 11:14 AM

somebody was making a big thumb screw to replace the allen keyed screw that is used on the standard mount. this is a much cheaper solution that won't change the height.

mitranoc · January 29, 2013, 05:48 PM

Quote:

somebody was making a big thumb screw to replace the allen keyed screw that is used on the standard mount. this is a much cheaper solution that won't change the height.

I'll have to find out who? I had a lower 1/3 mount with an Aimpoint Micro prior, and really didn't care for the added height.

loose_holster_dan · January 30, 2013, 08:15 AM

i want to say it was yhm. i found it on ebay years ago. it's what i'm using now.

sholling · February 1, 2013, 11:43 AM

Have you looked at the GG&G's QD mounting system? I use their Eotech QD system along with their lens caps on one of my Eotechs. I like them because they add no height to the sight. They make good stuff but make sure you get the right one for your sight.

http://www.gggaz.com/eotech-xps-qd-mounting-system.html

loose_holster_dan · February 1, 2013, 03:22 PM

January 28, 2013, 10:07 PM	#1
mitranoc Senior Member Join Date: November 24, 2011 Location: West Palm Beach, FL Posts: 337	EOTech QD mount from Larue Considering the LT110 QD mount for my XPS2. Interested in knowing if raising the optic .275" will make much of a cheekweld difference? __________________ "The very atmosphere of firearms anywhere and everywhere restrains evil interference - they deserve a place of honor with all that's good" George Washington Last edited by mitranoc; January 28, 2013 at 10:22 PM.

January 29, 2013, 10:22 AM	#4
mitranoc Senior Member Join Date: November 24, 2011 Location: West Palm Beach, FL Posts: 337	That might be the way to go. Plus there's enough room on the mount to put a magnifier behind the RDS. __________________ "The very atmosphere of firearms anywhere and everywhere restrains evil interference - they deserve a place of honor with all that's good" George Washington

January 29, 2013, 11:14 AM	#5
loose_holster_dan Senior Member Join Date: April 5, 2011 Location: NE Ohio Posts: 2,461	somebody was making a big thumb screw to replace the allen keyed screw that is used on the standard mount. this is a much cheaper solution that won't change the height. __________________ Favorite range gun for the money - CZ 75B or STI Spartan V 9mm Go-to carry setup - Walther PPS or PPQ in FIST kydex holster 1AK Favorite semi-auto design - HK P7 "A Sig is like a lightsaber - not as clumsy or random as a Glock."

January 30, 2013, 08:15 AM	#7
loose_holster_dan Senior Member Join Date: April 5, 2011 Location: NE Ohio Posts: 2,461	i want to say it was yhm. i found it on ebay years ago. it's what i'm using now. __________________ Favorite range gun for the money - CZ 75B or STI Spartan V 9mm Go-to carry setup - Walther PPS or PPQ in FIST kydex holster 1AK Favorite semi-auto design - HK P7 "A Sig is like a lightsaber - not as clumsy or random as a Glock."

February 1, 2013, 11:43 AM	#8
sholling Senior Member Join Date: May 18, 1999 Location: Hemet (middle of nowhere) California Posts: 4,261	Have you looked at the GG&G's QD mounting system? I use their Eotech QD system along with their lens caps on one of my Eotechs. I like them because they add no height to the sight. They make good stuff but make sure you get the right one for your sight. http://www.gggaz.com/eotech-xps-qd-mounting-system.html __________________ Proud Life Member: National Rifle Association, California Rifle & Pistol Association, and the Second Amendment Foundation. Annual Member: Revolutionary War Veterans Association (Project Appleseed) and the Madison Society.

January 28, 2013, 11:58 PM	#2
Ridge_Runner_5 Senior Member Join Date: February 8, 2008 Location: Denver, CO Posts: 1,925	Not much of a difference in cheek weld. Especially since the reticle will move with your head. It will move your absolute cowitness to a lower 1/3rd.

January 29, 2013, 10:09 AM	#3
Technosavant Senior Member Join Date: May 29, 2007 Location: St. Louis, MO area Posts: 4,040	Yeah, with modern CQB optics like EOTech and Aimpoint, you aren't needing a cheek weld, you just need to see the reticle. Mounting the optic slightly higher for a lower 1/3 cowitness can help keep your head more upright, potentially making things more comfortable for you as well as maybe speeding things up a bit. I have Aimpoints, but I do prefer the lower 1/3 cowitness to absolute.

February 1, 2013, 03:22 PM	#9
loose_holster_dan Senior Member Join Date: April 5, 2011 Location: NE Ohio Posts: 2,461	__________________ Favorite range gun for the money - CZ 75B or STI Spartan V 9mm Go-to carry setup - Walther PPS or PPQ in FIST kydex holster 1AK Favorite semi-auto design - HK P7 "A Sig is like a lightsaber - not as clumsy or random as a Glock."