revolver holster options needed

L- uspsa · October 22, 2006, 11:46 AM

i just bought a 5 inch 625 and am looking for a competion holster cheeper then 50 bucks. i would like somthing like a fobus roto, but they don't make one for a N frame revolver. does any one have a good lead i could look in to?

AzShooter · October 22, 2006, 05:17 PM

I checked Dillon for their holsters. Looks like the Safariland is $69. The Kramer is $75. I didn't see anything for $50.

I looked through Brownells too and they don't have one for under $50.

Good luck.

HSMITH · October 22, 2006, 06:14 PM

Everyone I see is using a Blade Tech or a CR Speed, and CR outnumbers Blade Tech by 10-1......

nccampbell · October 22, 2006, 07:54 PM

Go ahead and spend the money and get the cr speed holster, if your going to shoot competition, nothing is cheap. I have a 625 myself and I use this holster for my competition. It works well along with the belt they make. Hail to everyone who shoots the 625, there's nothing better for a revolver shooter to have, but a 625. Good luck Neil

L- uspsa · October 23, 2006, 06:49 PM

thank you

Ken O · October 25, 2006, 09:31 PM

deleted, duplicate

Ken O · October 25, 2006, 09:32 PM

I'm happy with the Blad Techs for my 625. I have two, one for IDPA, and one for USPSA. I cant remember what they cost, but I think they were more than $50.

GoSlash27 · October 26, 2006, 07:57 PM

Or...you could go get an old cop duty thumb break holster.

October 22, 2006, 11:46 AM	#1
L- uspsa Junior Member Join Date: October 22, 2006 Location: barre vemont Posts: 4	revolver holster options needed i just bought a 5 inch 625 and am looking for a competion holster cheeper then 50 bucks. i would like somthing like a fobus roto, but they don't make one for a N frame revolver. does any one have a good lead i could look in to?

October 22, 2006, 05:17 PM	#2
AzShooter Senior Member Join Date: June 20, 2006 Location: Surprise, Az. Posts: 766	Holster I checked Dillon for their holsters. Looks like the Safariland is $69. The Kramer is $75. I didn't see anything for $50. I looked through Brownells too and they don't have one for under $50. Good luck.

October 22, 2006, 07:54 PM	#4
nccampbell Junior Member Join Date: October 19, 2006 Location: Baton Rouge La. Posts: 9	625 holster Go ahead and spend the money and get the cr speed holster, if your going to shoot competition, nothing is cheap. I have a 625 myself and I use this holster for my competition. It works well along with the belt they make. Hail to everyone who shoots the 625, there's nothing better for a revolver shooter to have, but a 625. Good luck Neil Last edited by nccampbell; October 24, 2006 at 12:17 PM.

October 26, 2006, 07:57 PM	#8
GoSlash27 Senior Member Join Date: November 26, 2004 Location: Iowa Posts: 3,118	Or...you could go get an old cop duty thumb break holster. __________________ Bill of Rights Must be 18. Void where prohibited. Not available in all states. Some restrictions apply.

October 22, 2006, 06:14 PM	#3
HSMITH Senior Member Join Date: June 21, 2002 Posts: 2,019	Everyone I see is using a Blade Tech or a CR Speed, and CR outnumbers Blade Tech by 10-1......

October 23, 2006, 06:49 PM	#5
L- uspsa Junior Member Join Date: October 22, 2006 Location: barre vemont Posts: 4	thank you

October 25, 2006, 09:31 PM	#6
Ken O Senior Member Join Date: November 2, 2005 Location: Half way between Grayling and Cadillac, Michigan Posts: 353	deleted, duplicate

October 25, 2006, 09:32 PM	#7
Ken O Senior Member Join Date: November 2, 2005 Location: Half way between Grayling and Cadillac, Michigan Posts: 353	I'm happy with the Blad Techs for my 625. I have two, one for IDPA, and one for USPSA. I cant remember what they cost, but I think they were more than $50.