where to get a replacement non-lock trigger guard for a 870r 870

skeeter · August 26, 2002, 11:03 PM

Well it looks like thenew 870 with factory 2 shot extension does have the locking trigger group. Where can I get a non locking, pre PC trigger guard?

Dfariswheel · August 27, 2002, 12:35 AM

No need to buy an entire new guard, just by an old type safety and replace the PC model.

If you must have a new guard, check Gun Parts Corp, or watch Ebay, they turn up there often under "remington 870"

skeeter · August 27, 2002, 02:46 AM

Dfariswheel - What is the ph # for The Gun Parts Corp? That is all I wanted to do -just replace the trigger guard.

K80Geoff · August 27, 2002, 06:15 AM

http://www.brownells.com/index.html

Dfariswheel · August 27, 2002, 05:16 PM

Orders: (845)679-2417
Customer Service: (845)679-4867

http://www.e-gunparts.com/

Also, as above Brownell's.

Guyon · August 28, 2002, 09:27 PM

Watch that little spring when you slide out the retaining pin! Otherwise, you'll be ordering a new spring too. Recommend you change out the safety in a well-lit area with no little nooks or crannies for a spring to hide.

AAshooter · August 28, 2002, 09:30 PM

You may want to check some of the folks that modify shotguns to defensive guns. They often remove safeties and put a larger safety on.

Vang Comp, Scatter Gun, Wilson Combat . . . all may have the take-offs cheap. As I recall one was selling them for $5.

August 26, 2002, 11:03 PM	#1
skeeter Senior Member Join Date: October 29, 1999 Posts: 883	where to get a replacement non-lock trigger guard for a 870r 870 Well it looks like thenew 870 with factory 2 shot extension does have the locking trigger group. Where can I get a non locking, pre PC trigger guard?

August 27, 2002, 06:15 AM	#4
K80Geoff Senior Member Join Date: December 20, 1998 Location: NE Pennsylvania Posts: 3,639	http://www.brownells.com/index.html __________________ I am no longer a member of this forum. Bye!

August 28, 2002, 09:27 PM	#6
Guyon Senior Member Join Date: July 27, 2000 Location: Over the Hills and Through the Woods, Tennessee Posts: 1,207	Watch that little spring when you slide out the retaining pin! Otherwise, you'll be ordering a new spring too. Recommend you change out the safety in a well-lit area with no little nooks or crannies for a spring to hide. __________________ Gun control should just be about hitting your target.

August 28, 2002, 09:30 PM	#7
AAshooter Senior Member Join Date: March 5, 2001 Posts: 379	You may want to check some of the folks that modify shotguns to defensive guns. They often remove safeties and put a larger safety on. Vang Comp, Scatter Gun, Wilson Combat . . . all may have the take-offs cheap. As I recall one was selling them for $5. __________________ Play hard, shoot often, leave well worn guns!

August 27, 2002, 12:35 AM	#2
Dfariswheel Senior Member Join Date: May 4, 2001 Posts: 7,478	No need to buy an entire new guard, just by an old type safety and replace the PC model. If you must have a new guard, check Gun Parts Corp, or watch Ebay, they turn up there often under "remington 870"

August 27, 2002, 02:46 AM	#3
skeeter Senior Member Join Date: October 29, 1999 Posts: 883	Dfariswheel - What is the ph # for The Gun Parts Corp? That is all I wanted to do -just replace the trigger guard.

August 27, 2002, 05:16 PM	#5
Dfariswheel Senior Member Join Date: May 4, 2001 Posts: 7,478	Orders: (845)679-2417 Customer Service: (845)679-4867 http://www.e-gunparts.com/ Also, as above Brownell's.