Treadlok safe

mike2523 · February 11, 2022, 02:11 PM

I have a Treadlok safe and the combination is in the letters. It’s power is a 9v battery located inside the safe. It’s dead.
The safe has an battery override port hole on lower right of safe circled in red on the picture.

Question is: What size battery adapter plug is need to power up this safe to open it.

I lost or can’t find the plug that come with the safe and need to make a plug to energize it.

reloder56 · February 12, 2022, 10:37 AM

The male pin on my adapter is .197" in diameter, somewhere between 3/32 and 7/64. If you have an electronics store near you, see if they carry a "LKG Industries Universal AC/DC Adapter" Model BE 227. One of the male pins is the right size for Treadlok external power source port. It has been reported that when Treadlock went under, "Winchester" brand safes acquired all the remaining parts and blueprints from the bankruptcy.
Hope this helps,
Gary

February 12, 2022, 10:37 AM	#2
reloder56 Member Join Date: July 2, 2013 Posts: 59	The male pin on my adapter is .197" in diameter, somewhere between 3/32 and 7/64. If you have an electronics store near you, see if they carry a "LKG Industries Universal AC/DC Adapter" Model BE 227. One of the male pins is the right size for Treadlok external power source port. It has been reported that when Treadlock went under, "Winchester" brand safes acquired all the remaining parts and blueprints from the bankruptcy. Hope this helps, Gary