The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools Search this Thread
Old September 17, 2018, 09:59 AM   #26
MarkCO
Senior Member
 
Join Date: October 21, 1998
Location: Colorado, USA
Posts: 2,421
TAC is what I would suggest.

Varget is very good for bolts, but it is not an optimum powder for DI gas guns. Gas port erosion as well as gas ring wear are higher. It is very good powder for some bolt guns though. TAC meters well, works well in bolt guns and is a much better choice for the AR15.
__________________
Good Shooting, MarkCO
www.CarbonArms.us
MarkCO is offline  
Old September 17, 2018, 10:01 AM   #27
Ben Dover
Senior Member
 
Join Date: April 11, 2013
Location: High up in the Rocky Moun
Posts: 409
I try very hard to avoid any kind of extruded or "stick" powder whenever possible.
__________________
The soldier's pack is not so heavy a burden as the prisoner's chains. Dwight Eisenhower
Ben Dover is offline  
Old September 17, 2018, 05:17 PM   #28
flashhole
Senior Member
 
Join Date: February 9, 2005
Location: Owego, NY
Posts: 1,933
The Super Short Cut or SSC Hodgdon Extreme powders meter well and have good packing density. My personal favorite is H-4895. I found it to be more accurate with higher velocity than Varget. FWIW it works really well in 45-70 too.
__________________
,,, stupidity comes to some people very easily. 8/22/2017 Pat Lengyel (my wife) in a discussion about Liberals.
flashhole is offline  
Old September 17, 2018, 05:45 PM   #29
Ben Dover
Senior Member
 
Join Date: April 11, 2013
Location: High up in the Rocky Moun
Posts: 409
I will try that. 4895 is a great powder. A version of it that meters well would be a God's send.
__________________
The soldier's pack is not so heavy a burden as the prisoner's chains. Dwight Eisenhower
Ben Dover is offline  
Old September 17, 2018, 08:25 PM   #30
disseminator
Senior Member
 
Join Date: November 26, 2016
Location: Minnesota
Posts: 830
Look into AR-COMP or PP2000MR, there are working well for me.
disseminator is offline  
Old September 17, 2018, 11:38 PM   #31
lordmorgul
Member
 
Join Date: August 18, 2016
Posts: 99
Accurate LT32 for both calibers.


Andrew - Lancaster, CA
NRA Life Member, Calguns.net contributor, CGF / SAF / CRPA / FPC / USCCA member
lordmorgul is offline  
Old September 18, 2018, 07:36 PM   #32
Average Joe
Senior Member
 
Join Date: August 29, 2005
Location: Easton, PA
Posts: 1,134
the op said he wants one powder for both, so giving him two powders isn't going to help the guy out....just sayin.....
Average Joe is offline  
Old September 18, 2018, 08:15 PM   #33
FM12
Senior Member
 
Join Date: February 5, 2007
Location: Monroeville, Alabama
Posts: 1,652
Ww748
FM12 is offline  
Old September 19, 2018, 05:49 AM   #34
Road_Clam
Senior Member
 
Join Date: November 21, 2013
Location: New Hampshire
Posts: 1,091
If the op is thinking 4064, just a head's up it's a MISERABLE metering powder through a drum powder dispenser. "Chopping matchsticks" is my coined phrase. My suggested fav W748 is a ball powder and meters like a dream no matter what type of dispensing method.
__________________
"To be old an wise you must have been young and stupid"
Road_Clam is offline  
Old September 19, 2018, 07:56 PM   #35
308Loader
Senior Member
 
Join Date: August 24, 2014
Location: Minnesota
Posts: 385
"MISERABLE metering powder through a drum powder dispenser. "Chopping matchsticks" is my coined phrase."

I do agree, but with a "auto charge" power trickler its not so much an issue. I do have 3 different measures. only reason I'm thinking of 4064 is I have good tested loads, and temp stability is a must where I live. in the last week we went from 90f high to 65f temp swing. in the next month I expect to see 70f to 30f swings. 4064 has done well in this so far. from dec to feb I will be in the neg numbers and then spring will come again and so on with temps.

I'm not opposed to trying new things, but $200 in powder is an investment. only reason for asking one powder for 2 Cal - 4 rifles. It might not be possible, thought I might ask the community.

One thing I've seen in the responses is gas tube and ring life, what gives with that? stick powder is more abrasive?
__________________
Just a dude with stuff.
308Loader is offline  
Old September 19, 2018, 08:39 PM   #36
cw308
Senior Member
 
Join Date: September 2, 2010
Location: Plainview , Long Island NY
Posts: 2,725
I like IMR 4064 for target shooting , you could shoot mild loads with this powder an it will fill the case just right . Shooting 1 - 2 thousand rounds in each a 8 pounder will go pretty quick anyway . 4064 is a good all around powder , alittle harder to meter.
cw308 is offline  
Old September 19, 2018, 08:56 PM   #37
2ndtimer
Senior Member
 
Join Date: October 9, 2004
Posts: 228
IMR-4064 has been my main .308 Win. powder for the past several years, while Ramshot TAC is my go to for the .223/5.56. I have tried TAC in the .308 Win., but it doesn't match the accuracy of 4064. And 4064 doesn't match TAC velocity or accuracy in the .223/5.56. TAC is cheaper than IMR-4064, and may be adequate for your needs, it does meter much better than 4064. I suggest giving it a try, and if it proves inadequate for your .308 Win., use it up in your .223.
https://www.powdervalleyinc.com/product/ramshot-tac/
Or you could try IMR-8208XBR, it meters decently, and works better than 4064 in the .223 and may prove better in the .308.
__________________
NRA Endowment Member
2ndtimer is online now  
Old September 21, 2018, 05:46 PM   #38
308Loader
Senior Member
 
Join Date: August 24, 2014
Location: Minnesota
Posts: 385
Thanks for all the replies guys, its pay day and I went and got a jug of 4064. As mentioned before it may not be the best for both applications ( because there isn't one), meters like crap, but is a good temp stable powder for target shooting and more. Don't tell the wife but I also picked up a # of varget. They didn't have Tac or H335, I will sneak some home when I can. With my shooting habit the 8#er will be gone by spring, still have some blc2, imr4895, cfe223 to burn through as well so I'm set for a while. Next thing I will run out of is primers, only have 1k of each, that will be another post. Oh then their is bullets...

Interested in the WC powders but not sure they are for me. Can to can the commercial stuff seems pretty consistent for my loads. The commercial stuff is listed in my load manuals. Would have to double down on some pull down powders to make it worth while. load ladders for a given bullet weight, after ladder to tune, there goes 2# -3#. Then I have the issue of, what if it sits too long, it's already rejected right? What if I don't find a load I like, what if, what if... Too many what if. Then again I haven't tried it so there is that.


again thanks all, lots of food for thought
__________________
Just a dude with stuff.
308Loader is offline  
Old Yesterday, 12:55 AM   #39
Metal god
Senior Member
 
Join Date: April 10, 2012
Location: San Diego CA
Posts: 4,229
I think that was a good choice in so much as you already have loads worked up using that powder and it's working well for you . I got to a point where I was sick of doing load developments . That's all it seemed I did and each range trip felt more like work then recreation . I had to tell my self to stop trying new powders and bullets . That was a year or two ago now and I'm having much more fun when I go to the range now .


I do like that you picked up a # of Varget . You'll find it works quite well and I suspect by the time you're done with this 8#er You'll know if the Varget is worth a 8#er .
__________________
Tolerate- allow the existence, occurrence, or practice of something that one does not necessarily like or agree with , without interference.
If you have some time IMO this is worth a listen/watch but it takes a few minutes to really get going .
https://www.youtube.com/watch?v=USg3NR76XpQ&t=3265s or a picture of Mohamed https://www.youtube.com/watch?v=1VwpwP_fIqY

Last edited by Metal god; Today at 01:05 AM.
Metal god is offline  
Old Today, 01:26 AM   #40
2ndtimer
Senior Member
 
Join Date: October 9, 2004
Posts: 228
IMR-4064 is a great powder to have on hand. I have used it in the .223 Rem., 22-250, .243 Win, .270 Win, 7mm-08, .308 Win, and 30-06, with decent to very good performance in all of them. Favorite powder for 168 gr and 175 gr Match bullets in the .308. Varget meters better, but for some reason, I have always had better results with IMR-4064, and have had Varget misbehave at the upper end in some cartridges. (22-250 and .243 Win) It was the first powder I ever purchased and used for my first handloads (early '80's) in my first centerfire rifle. (.243 Win, 80 gr Speer spitzers). It worked great back then and still does today.
__________________
NRA Endowment Member
2ndtimer is online now  
Old Today, 07:20 AM   #41
gwpercle
Senior Member
 
Join Date: November 30, 2012
Location: Baton Rouge, Louisiana
Posts: 744
For the "matchstick" powders you have so much trouble metering , use a Lyman 55 and adjust the slides to give a deep narrow cavity...it will work like a charm after you develop a consistent metering technique .
Gary
gwpercle is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:24 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06975 seconds with 9 queries