The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Semi-automatic Forum

Reply
 
Thread Tools Search this Thread
Old December 1, 2017, 07:24 PM   #1
Targa
Senior Member
 
Join Date: March 20, 2014
Posts: 2,084
RM380

Just picked up my Rem RM380. Will not chamber 95 grn Fiocchi FMJ's. I will try some Federal offerings and see if I have better luck. Anybody else experience similiar issues?
Targa is offline  
Old December 2, 2017, 09:02 PM   #2
franco45
Senior Member
 
Join Date: August 29, 2010
Location: Toledo Ohio
Posts: 474
Mine has eaten anything I've fed it including Fiochi. This is my second one. My nephew now owns the first one that I had. That one was 100% with all ammo also.
franco45 is offline  
Old December 2, 2017, 11:13 PM   #3
Targa
Senior Member
 
Join Date: March 20, 2014
Posts: 2,084
Thank you for the response. I picked up a box of American Eagle, they chambered smoothly and fed easily.
Targa is offline  
Old December 3, 2017, 01:21 AM   #4
Ibmikey
Senior Member
 
Join Date: June 1, 2013
Location: Now relocated to Texas
Posts: 2,943
My RM 380 has gobbled anything I stuffed into it, mostly white box Winchester and Freedom FMJ’s.
Ibmikey is offline  
Old December 3, 2017, 04:08 PM   #5
Armybrat
Senior Member
 
Join Date: May 10, 2009
Location: Round Rock, Texas
Posts: 976
Haven't shot mine yet, but will post a pic anyway...

Armybrat is offline  
Old December 3, 2017, 05:43 PM   #6
Sgt127
Senior Member
 
Join Date: May 13, 2002
Posts: 1,053
Bought one soon after they came out. Just bought a second one. I think it’s about as good as it gets for a pocket .380. And, I have quite a few .380’s and have owned others.

Mines never bobbled. I’m guessing that particular ammo is out of spec. Or, it was never crimped.
Sgt127 is offline  
Old December 3, 2017, 06:55 PM   #7
Targa
Senior Member
 
Join Date: March 20, 2014
Posts: 2,084
That's my guess. I am hoping that it is reliable with other offerings, I really like this firearm.
Targa is offline  
Old December 3, 2017, 07:10 PM   #8
TunnelRat
Senior Member
 
Join Date: May 22, 2011
Posts: 12,205
Quote:
I’m guessing that particular ammo is out of spec. Or, it was never crimped.
As someone that's shot thousands of rounds of Fiocchi that'd be a first.

Might be worth comparing the cartridges to see if that's the issue.
__________________
Know the status of your weapon
Keep your muzzle oriented so that no one will be hurt if the firearm discharges
Keep your finger off the trigger until you have an adequate sight picture
Maintain situational awareness
TunnelRat is offline  
Old December 3, 2017, 07:39 PM   #9
Targa
Senior Member
 
Join Date: March 20, 2014
Posts: 2,084
Just by eye balling without a gauge I can't see any discernible difference between the Fiocchi that doesn't chamber and the American Eagle that chambers without issue..... I can't figure it out.
Targa is offline  
Old December 7, 2017, 10:45 AM   #10
glockman55
Senior Member
 
Join Date: April 19, 2009
Location: Mich
Posts: 179
After you shoot a few hundred rounds of American Eagle through it try the Fiocchi again.. Nice little carry gun.. I have the sig p232 and 238, might have to give the RM380 a look too.. Good Luck
glockman55 is offline  
Old December 7, 2017, 05:35 PM   #11
Targa
Senior Member
 
Join Date: March 20, 2014
Posts: 2,084
Yeh, hopefully that will help. Fiocchi is the primary round that I feed all of my handguns, followed by Sellier & Bellot, Magtech and PPU all do to a reasonable bang for the buck....
Targa is offline  
Old December 8, 2017, 03:28 PM   #12
Targa
Senior Member
 
Join Date: March 20, 2014
Posts: 2,084
Just got back from the range, putting aside the Fiocchi issues the gun performed flawlessly with both Rem and Federal rounds. I have heard numerous bad things about the trigger but I found it to be exactly what a pocket carry firearm should be. The trigger pull is long, maybe a little heavy with no felt reset but it is smooth reminding me of my Kahr CM9.
Anyway, my thoughts on it and I am pretty happy with the $170 I dropped on it.
Targa is offline  
Old December 8, 2017, 10:44 PM   #13
bedbugbilly
Senior Member
 
Join Date: November 19, 2009
Posts: 3,287
Take a Fiocchi round, use a black marker and coat it over the bullet and back a ways from the crimp line - chamber and see if it shows any rub as far as the chamber goes. Better yet, move the barrel and try a "plunk' test of the round in the chamber that will show if the base is sitting at the end of the barrel or protruding slightly.

If yu have a round (brand) that chambers and shoots, then compare the overall length of it using dial calipers and then check the crimp OD. If the Fiocchi falls within SAAMI specs, it should chamber.
__________________
If a pair of '51 Navies were good enough for Billy Hickok, then a single Navy on my right hip is good enough for me . . . besides . . . I'm probably only half as good as he was anyways. Hiram's Rangers Badge #63
bedbugbilly is offline  
Old December 9, 2017, 10:30 AM   #14
briandg
Senior Member
 
Join Date: May 4, 2010
Posts: 5,468
in such a tiny little thing even a small deviation of chamber size and throat could cause the things to catch on the rifling when feeding, and seriously, how strong are the return springs? it isn't going to hammer that thing in hard enough to overcome a little friction.
__________________
None.
briandg is offline  
Old January 30, 2018, 08:33 PM   #15
Targa
Senior Member
 
Join Date: March 20, 2014
Posts: 2,084
Quote:
After you shoot a few hundred rounds of American Eagle through it try the Fiocchi again.. Nice little carry gun.. I have the sig p232 and 238, might have to give the RM380 a look too.. Good Luck
Just an update Glockman. I did just this ^^^and it is feeding the Fiocchi's now. Thank you, have a good one.
Targa is offline  
Old January 30, 2018, 11:23 PM   #16
kymasabe
Senior Member
 
Join Date: June 10, 2005
Location: SW Florida
Posts: 2,747
I had two of them, ran over a thousand rounds thru the first one without any failures, tried a variety of ammo's, gun ran flawlessly. Sold it, regretted it, bought another. Gun #2 got all the goodies from Galloway Precision which made the trigger much better. Very nice guns, highly under rated.
Gun #2 is gone now, I wish I hadn't missed the rebate Remington was just offering or I would have bought another.
__________________
God's creatures big and small, eat them one, eat them all.
kymasabe is offline  
Old January 31, 2018, 10:06 AM   #17
Carl the Floor Walker
member
 
Join Date: June 3, 2017
Location: South
Posts: 1,422
I shoot a lot of Fiocchi both in 9mm and 380. If your 380 will not Shoot Fiocchi, I have to ask you what Fiocchi are you shooting? I did some observation and measurements, when my Kahr would not shoot it. Well, normally I shoot Extrema which shoots fine in all my 380's. However I shot their "Linea" range ammo and it would not feed. Why? Because the OAL was longer than the Extrema. I do not purchase the cheaper Linea. Your gun may and should shoot fine with the highly praised "Extrema".
Carl the Floor Walker is offline  
Old January 31, 2018, 10:40 AM   #18
BIGR
Senior Member
 
Join Date: June 13, 2000
Location: Mountains
Posts: 1,385
Not a bad looking little pistol, how is the accuracy guys?

Also I think I read where the slide is stainless steel and is coated in a black finish?

Stainless steel slide would be a plus for me.
BIGR is offline  
Old January 31, 2018, 03:30 PM   #19
GarandTd
Senior Member
 
Join Date: June 15, 2016
Location: Rural PA
Posts: 1,639
The slide and barrel are both stainless. I am quite pleased with the accuracy of mine. I get 3" groups @ 7 or 8 yards. I had a way low flyer on the 1st bullseye. Believe it or not, that's 3 rounds through the same hole next to the x of the 2nd bullseye. Each bullseye was a 6 round mag of Tula.
Attached Images
File Type: jpg rps20180131_151745_510.jpg (153.5 KB, 19 views)
__________________
22lr, 20 gauge, 8mm Mauser, 35 Remington, 30-06, 5.56x45/223, 9mm, 380acp
GarandTd is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:36 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.07336 seconds with 9 queries