CVA Choke Tube

armedandsafe · October 27, 2006, 11:00 PM

The mystery is solved. Well, kinda, anyway.

I sent my choke tube to Shane at Carlson's, after trying two he sent me. It turns out that mine is a custom, probably home built. The threads are not standard and there is no other commercial choke to match it. The threads start out as about 36tpi and wander off to something a bit finer. The threads in the barrel match.

Shane's contact at CVA, who has worked there for years states that all their chokes were purchased as Winchester/Mossberg/Invector standards, and those will fit any CVA factory threaded barrel. Those are 32tpi.

So, this answers the question of what chokes fit the CVA shotguns, as well as we are going to get.

Pops

October 27, 2006, 11:00 PM	#1
armedandsafe Senior Member Join Date: January 9, 2005 Location: Moses Lake WA Posts: 1,001	CVA Choke Tube The mystery is solved. Well, kinda, anyway. I sent my choke tube to Shane at Carlson's, after trying two he sent me. It turns out that mine is a custom, probably home built. The threads are not standard and there is no other commercial choke to match it. The threads start out as about 36tpi and wander off to something a bit finer. The threads in the barrel match. Shane's contact at CVA, who has worked there for years states that all their chokes were purchased as Winchester/Mossberg/Invector standards, and those will fit any CVA factory threaded barrel. Those are 32tpi. So, this answers the question of what chokes fit the CVA shotguns, as well as we are going to get. Pops __________________ Armed and Safe: Not just a theory If it time to bury them, it is time to dig them up. Remember, "Behind every blade of grass."