March 29, 2000, 09:38 PM | #1 |
Member
Join Date: January 19, 2000
Posts: 17
|
Is Varget a good powder for 22-250 loads.
I am using IMR 4895 right now, but one of my friends thought I should try using varget. so I was wondering if any of you use it, and what you think of it |
March 29, 2000, 10:37 PM | #2 |
Staff in Memoriam
Join Date: November 13, 1998
Location: Terlingua, TX; Thomasville, GA
Posts: 24,798
|
Well, here comes ol' 4064, again. That or 3031, depending on your gun...
Haven't used Varget. You might also ask over at http://www.varminter.com since there are several there who have discussed loads for the .22-250. Best luck, Art |
March 29, 2000, 10:42 PM | #3 |
Member
Join Date: January 19, 2000
Posts: 17
|
thanks for the info Art
|
March 30, 2000, 11:51 AM | #4 |
Retired Screen Name
Join Date: November 17, 2000
Posts: 1
|
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by cooper223:
Is Varget a good powder for 22-250 loads. I am using IMR 4895 right now, but one of my friends thought I should try using varget. so I was wondering if any of you use it, and what you think of it[/quote] ------------------ |
March 30, 2000, 12:48 PM | #5 |
Staff
Join Date: March 20, 1999
Location: Somewhere in the woods of Northern Virginia
Posts: 16,955
|
Jeffrey, first of all welcome to TFL. If you want to add to your note, press the little pad/pencil icon. Using the Reply-with-quote icon (paper and red arrow) is sometimes confusing and we are seriously thinking about removing it. In general you will want to use the "Post Reply" button to add to the discussion. Hope this helps.
|
|
|