The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Semi-automatics

Thread Tools Search this Thread
Old November 25, 2012, 03:57 PM   #1
Join Date: November 7, 2012
Location: Central Maryland
Posts: 58
Ruger 10/22 Rifle -- Stock extension?

I really like this rifle but was wondering if there is a way to somehow extend the shoulder stock?? Anyone know of a way to do this with aftermarket stuff or another fairly inexpensive way?
Thanks everyone.
MTHall720 is offline  
Old November 25, 2012, 05:10 PM   #2
Join Date: November 9, 2008
Posts: 71
There is a buttpad that is a good 1 in. thick. I put one on my 96/22M since the plastic pad was slippery. Now the rifle stays put when I work the lever and the LOP is better. I think you can find one on EBay for around 10 bux.
specs is offline  
Old November 25, 2012, 05:29 PM   #3
Senior Member
Join Date: June 15, 2008
Location: Georgia
Posts: 9,035
There are some extended butt plates that add a little length to the stock.

But if you look around you can find an aftermarket stock isn't really that expensive and a much better choice in my opinion. I like the Rugers, but the only factroy stock I can handle is the Deluxe.

You can sometimes find them used on e-bay etc. The Hogue isn't bad on a 10-22 either. Wouldn't want one on a centerfire.
jmr40 is offline  
Old November 25, 2012, 07:34 PM   #4
Senior Member
Join Date: February 16, 2006
Location: IOWA
Posts: 7,270
This one worked for me !!

You did not mention what model you have but if it's the basic Carbine then the provided link is the one I have used in the past. Not to extend but wanted pad or buttplate that does not easily slide. Worked out just fine and did not cost much. ...

Be Safe !!!
'Fundamental truths' are easy to recognize because they are verified daily through simple observation and thus, require no testing.
Pahoo is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 04:42 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.05101 seconds with 10 queries