June 9, 2018, 08:44 PM | #1 |
Senior Member
Join Date: January 23, 2011
Location: Carter Lake Ia.
Posts: 237
|
Star ?
Just picked up a Star model B with no import marks at all, #225688 were some of these brought in without being marked? terry
|
June 9, 2018, 10:07 PM | #2 |
Senior Member
Join Date: April 7, 2006
Posts: 10,981
|
Lots of them!
|
June 10, 2018, 01:19 AM | #3 |
Senior Member
Join Date: June 1, 2013
Location: Now relocated to Texas
Posts: 2,943
|
You acquired a great shooter in the Star Model B, they are easily dated with the Spanish code on the frame and/or the serial number. I have over eighty Star pistols many with no import marks and many with Interarms markings (the sole importer for many years). Yours was made in 1943 part of a run of 2000.
|
June 10, 2018, 06:21 AM | #4 |
Senior Member
Join Date: January 23, 2011
Location: Carter Lake Ia.
Posts: 237
|
Done a little more checking, on left side has a N with a mark above it, which I think dates it to 1943, and has import letters under the slide lock. terry
|
June 10, 2018, 04:38 PM | #5 |
Senior Member
Join Date: September 16, 2015
Posts: 646
|
I'm picking up this BM tomorrow.
|
June 11, 2018, 06:46 AM | #6 |
Junior Member
Join Date: July 18, 2007
Posts: 8
|
looks like a fine gun[
|
June 11, 2018, 07:24 AM | #7 |
Senior Member
Join Date: October 17, 2014
Posts: 2,444
|
Nice find! I have three Star pistols and they're all excellent.
|
June 13, 2018, 10:36 PM | #8 |
Senior Member
Join Date: August 9, 2007
Location: Oregoncoast
Posts: 1,793
|
I see what looks to be VG condition BM's for sale for at or slightly under $200. To me that makes most new pistols sold today to look way over priced, as the Stars are very high quality handguns.
I have an A model (9MM Largo) that is sweet.
__________________
CNC produced 416 stainless triggers to replace the plastic triggers on Colt Mustangs, Mustang Plus II's, MK IV Government .380's and Sig P238's and P938's. Plus Colt Mustang hardened 416 guide rods, and Llama .32 and .380 recoil spring buttons, checkered nicely and blued. |
June 14, 2018, 04:02 AM | #9 |
Senior Member
Join Date: June 1, 2013
Location: Now relocated to Texas
Posts: 2,943
|
Most of the low priced BM pistols are great shooters but lack any collector value as first the Spanish Gov ground off unit markings then CAI put their gigantic billboard of crap on the side. Many of these pistols are in original boxes and very good condition otherwise. Up until this release the unit markings were left intact, I guess this is a way to avoid future embarrassment?
|
June 16, 2018, 05:56 PM | #10 | |
Senior Member
Join Date: September 16, 2015
Posts: 646
|
Quote:
|
|
June 19, 2018, 02:07 AM | #11 |
Senior Member
Join Date: June 1, 2013
Location: Now relocated to Texas
Posts: 2,943
|
Yes, having original police markings is better aesthetically but the latest imports are great shooters none the less and are worth the price asked by distributors ( around $200-225). I saw one at a gun show Sat that was priced at $500 and others $350 to $400, not much of a bargain.
|
June 19, 2018, 07:17 AM | #12 |
Senior Member
Join Date: October 17, 2014
Posts: 2,444
|
I have a little 25 (Model CO I think) that is pretty cool.
My Super B and BM are excellent shooters. I got them for $200-something apiece. They are high-quality pistols. To get them for the price I did is almost ridiculous. After my FiL shot my Super B, he ordered himself one as soon as he got home. My Super B had very little wear, my BM had almost none, my FiL's Super B appeared to be NIB. My advice is get one before they're gone. |
June 20, 2018, 01:01 AM | #13 |
Senior Member
Join Date: June 1, 2013
Location: Now relocated to Texas
Posts: 2,943
|
Echo what tallball suggests, soon all fine surplus firearms will be but a memory. I purchased a Nagant revolver, Arsenal refinished with new checkered wood grip, for $99 a couple of years ago and currently if you can still find one they run $350+. With NATO directing all countries to destroy surplus firearms imports to the US will come to a halt.
The Model B Star is a more traditional design but many surplus offerings are for pretty worn pistols, often Super Model B’s can be found in nice shape. One of my B Super’s was featured in a Firearms news article a few months back, that pistol is in like new condition. |
June 22, 2018, 04:45 PM | #14 |
Senior Member
Join Date: January 2, 2005
Location: Where the deer and the antelope roam.
Posts: 3,082
|
I would love to have one. My hands are too big.
__________________
Retired Law Enforcement U. S. Army Veteran Armorer My rifle and pistol are tools, I am the weapon. |
June 22, 2018, 05:52 PM | #15 |
Senior Member
Join Date: February 24, 2001
Location: San Joaquin Valley, CA
Posts: 1,281
|
Congrats on your Star!
The gunboards website has a section for Spanish pistols- and there is a lot of support for STAR there. I have 4 Star handguns, and a Argentinian copy of a Star pistol as well. I love the feel and history to them. I'd like to have a 1943 Model B- to go with my 1943 Mauser [Walther designed] P38, and my 1943 Ballester-Molina. However, I have a 1945- and that is as close as I can get. If you have reliability issues- go to the Spanish pistols section of the gunboards forums, and ask. Or, pm me. I had to have a new extractor made for one, and it works great now. However, the extractor work was 1/3 the cost of the entire handgun. Of course, now I have a handgun that works right. Fun handguns. Enjoy! |
June 24, 2018, 12:30 AM | #16 |
Junior Member
Join Date: January 21, 2018
Posts: 7
|
I have an Interarms imported Super B in 9mm, catalog number STP 04901, I picked up years ago, serial 176xxxx. I don't think I ever shot it lol. It got buried in a box since I moved shortly after and I forgot about it.
The only stamp it has is Spain unless there is something under the grips. Not mine, but matches exactly what I have. I didn't realize these made good shooters. I may have to take it out next time I go though it sounds like replacement parts may be a pain. Of course it doesn't sound like they are particularly valuable either so may not be a huge loss if I shoot it until it breaks. I have read you also shouldn't dry fire them though. |
June 24, 2018, 01:04 AM | #17 |
Junior member
Join Date: October 20, 2012
Posts: 5,854
|
I've looked at the Stars but maaahhh... don't know. The guns might be cheap today, but when they break, parts will not be an easy find my friends. Keeping me away.
|
June 24, 2018, 03:52 AM | #18 |
Senior Member
Join Date: April 7, 2006
Posts: 10,981
|
Very little breaks on Star pistols.
I make firing pins. Other than those, the pistol should run for a lifetime. |
June 24, 2018, 04:52 PM | #19 |
Senior Member
Join Date: October 17, 2014
Posts: 2,444
|
Don't dry fire it. Don't shoot it 500 rounds per week.
Mine are range guns that are in my rotation and get shot less than 100 rounds per month. They will last much longer than I will. I might have to buy a spring for one or both of them eventually. They are heavy-duty service pistols. I am not worried that a part will suddenly break. If needed, I wouldn't hesitate to use them for SD. They are accurate and reliable. Yeah, you could wear one out and break a part, but it would be the same as doing it to a 1911 or a Model 10. |
June 29, 2018, 05:48 AM | #20 |
Senior Member
Join Date: June 1, 2013
Location: Now relocated to Texas
Posts: 2,943
|
Brennok, Whom ever told you Star pistols are cheaply made is incorrect, the Spanish Army, Air Force, police services as well as many other countries services used the pistols with exceptional results. So many of these pistols were then bought as surplus by Israel and saw a second service finally being imported to the US for sale to us. Not many companies can boast of such service reliability with regard to their product, I shoot all of my Star pistols and worry not about breakage as they soldier on.
|
June 29, 2018, 08:34 PM | #21 |
Junior Member
Join Date: January 21, 2018
Posts: 7
|
Oh I didn't get the impression that they were cheaply made. I just read that parts were harder to come by so if something breaks you may have a challenge finding replacement parts.
I think I also viewed them more as a work or duty pistol and less about of a fun range toy. I am only just getting back into guns so my opinion is more than likely based off past discussions and nothing recent. |
June 30, 2018, 03:49 AM | #22 |
Senior Member
Join Date: June 1, 2013
Location: Now relocated to Texas
Posts: 2,943
|
Yes, definitely a duty type pistol, one of mine cleaned out a trap with 13 Texas hogs in it the other day......one by one. For plinking the BM is hard to beat and I never dry fire without an AZoom snap cap nor do I worry about broken parts as it just has not happened.
|
June 30, 2018, 11:37 AM | #23 | |
Senior Member
Join Date: August 9, 2007
Location: Oregoncoast
Posts: 1,793
|
Quote:
Funny thing is that when we see a gun at a gun show cheap like that we assume it's junk, then later after the spike in prices we want one badly. I want a Nagant for the study of it's mechanics, plus the challenge of reloading, I assume all are berdan primed. But the Stars are ready to go, and as for parts most are available used just like any 50 year old handgun's parts. Colt doesn't carry SAA parts do they? Probably no manufacturer carries new replacement parts unless they are currently manufacturing the guns, like PSA does the 80 year old Baby Browning design.
__________________
CNC produced 416 stainless triggers to replace the plastic triggers on Colt Mustangs, Mustang Plus II's, MK IV Government .380's and Sig P238's and P938's. Plus Colt Mustang hardened 416 guide rods, and Llama .32 and .380 recoil spring buttons, checkered nicely and blued. |
|
|
|