May 19, 1999, 09:24 PM | #1 |
Member
Join Date: December 6, 1998
Location: Philippines
Posts: 92
|
a friend of mine is selling .308 ammo
marked GE...any info regarding this ammo? pls. help.. ------------------ REY MARIANO |
May 30, 1999, 03:49 AM | #2 |
Junior Member
Join Date: April 24, 1999
Posts: 10
|
Not 100% sure but likely manufactured by GE for the mini gun and has been de-linked for resale.
By the way, how much and what quantity? [This message has been edited by JEG (edited May 30, 1999).] |
June 1, 1999, 10:25 PM | #3 |
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 21,838
|
Hi Rey,
Use to be a German firm by the name of Geco. Their ammo was quite good. By the way, whatever happened to your MP5K with its dissolving buffer. Where you able to get a replacement? Gary ------------------ Vigilantibus et non dormientibus jura subveniunt |
June 2, 1999, 07:12 PM | #4 |
Member
Join Date: December 6, 1998
Location: Philippines
Posts: 92
|
Thanks Gary,
Thanks for the info..I also came across some .223 Ammo marked like the one I mentioned. Is it also the same as (GD,GF,etc...)it has green 'primer sealant'.. Regarding my mp5k, My relatives in the US is still trying to contact HK through law enforcement units, but i think youre right about HK not caring to "small time individuals" and only to the big time clients..,but were still trying.. we tried to fabricate hard rubber as a temporary replacement...do you think it is safe? Thanks a lot.... |
June 2, 1999, 10:04 PM | #5 |
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 21,838
|
Rey,
It'll work in a pinch, but sustained firing may cause permanent damage to your endcap. You may want to contact Buffer Technology (P.O. Box 104903, Jefferson City, MO, 65110 USA, http://www.buffertech.com) and see if they can help you. They make a buffer for the HK91 and it should fit into your MP5 (the shape of the receiver on all those guns are the same). Drop them an email and see if they can help. Good luck. Gary ------------------ Vigilantibus et non dormientibus jura subveniunt |
June 3, 1999, 07:05 PM | #6 |
Member
Join Date: December 6, 1998
Location: Philippines
Posts: 92
|
thanks for the tip gary, i've already drop them a mail after your advise.
BTW, is the GE ammo im referring to is safe to be fired on a Rem. 700 bolt action rifle? i bought 300 rounds from my friend and they are in excellent condition.(box) Thanks again. |
June 3, 1999, 10:02 PM | #7 |
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 21,838
|
Because it is foreseeable that a firearm may be used with ammunition which is either SAAMI or Milspec, most American gun makers design them to accept either (or otherwise risk chance of the firearms destruction, injury to the shooter or bystanders, and lengthy litigation). About the only thing most guns aren't designed to handle is hotter SMG ammo. Provided that Geco meets SAAMI or Milspec, I don't think there'll be any trouble. If you fire one round, inspect the cartridge case for bulging or the primer for flattening. If you see neither, you should have no problem. Good luck Rey.
Gary |
June 4, 1999, 01:52 AM | #8 |
Member
Join Date: December 6, 1998
Location: Philippines
Posts: 92
|
tnx for the tips...you're a big help!
i tried shooting some and theyre accurate! |
June 10, 1999, 05:54 PM | #9 |
Junior Member
Join Date: October 17, 1998
Location: Plantation,Florida USA
Posts: 1
|
try Anthoney arms her in Ft-Lauderdale FL
they carry a large range of spare parts for H&K |
June 10, 1999, 11:52 PM | #10 |
Member
Join Date: December 6, 1998
Location: Philippines
Posts: 92
|
do they have a website or e-mail address?
or phone no. or fax? Thanks alot! |
|
|