November 9, 2008, 08:29 PM | #1 |
Junior Member
Join Date: November 9, 2008
Posts: 1
|
Remington 1100 help
i was cleaning my 1100 and i had already taken the barrel off, when i picked up the stock i knocked the action forward and now cant get it back to put the barrel back on.. What do i do to fix this?
|
November 9, 2008, 09:39 PM | #2 |
Junior member
Join Date: July 2, 2006
Posts: 315
|
this might help..
go to youtube.com and type in remington 1100 and see if they have some video clips of this, I've seen one before on disassembly and reassembly of an 870.
Sure someone around this forum can help you as well. Not me however. |
November 9, 2008, 09:43 PM | #3 |
Senior Member
Join Date: August 23, 2008
Location: SoCal
Posts: 6,442
|
Greetings wadehalk and welcome aboard...
Do you mean that you closed the bolt? Rather than go into a long discussion on the care and feeding of your Remmy. Here's a link where you can download the owners manual. If you don't find the info you need, check back with us. Good luck. |
November 9, 2008, 10:16 PM | #4 |
Junior member
Join Date: April 18, 2008
Location: N. Central Florida
Posts: 8,518
|
Did you knock the wishbone spring out of place? That will make getting it back together a bit tricky.....It's not hard to put one back together
|
Thread Tools | Search this Thread |
|
|