The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools Search this Thread
Old March 25, 2020, 09:57 PM   #1
Pbaker29
Junior Member
 
Join Date: March 25, 2020
Posts: 1
Breech face impact marks

I recently noticed impact marks on the breech face, and it appears to be from the bolt. I had a stoppage during my last shooting session. The round failed to fire, and failed to eject. I cycled the bcg several times in an attempt to eject the round. I'm honestly not sure what the issue was with the round, but I did eventually get it out. I fired roughly 20-25 rounds afterwards with no issue.

After getting home and cleaning the rifle, I noticed impact marks from the bolt on the breech face, and what appears to be some scratches on the chamfer area around the chamber (I assume it is damage from the stuck round). What I'm not sure about is how the bolt marks got on the breech face. Is this cause for concern? It seems to cycle and function. I would venture to say it functions flawlessly if it weren't for the stuck case. It has never malfunctioned before thru almost 1,000 rounds (knock on wood).

Also, bolt looks to be just fine.

Anyhow, any advice?
Attached Images
File Type: jpg 0325202007_HDR.jpg (202.7 KB, 63 views)
File Type: jpg 0325202004.jpg (111.6 KB, 59 views)
Pbaker29 is offline  
Old March 26, 2020, 07:24 PM   #2
KEYBEAR
Senior Member
 
Join Date: January 11, 2012
Location: Indiana
Posts: 957
It would help a lot if I/we knew what firearm you are talking about and the ammo you are useing .
KEYBEAR is offline  
Old March 26, 2020, 08:17 PM   #3
44 AMP
Staff
 
Join Date: March 11, 2006
Location: Upper US
Posts: 20,972
Quote:
(I assume it is damage from the stuck round).
WHy???

What did the stuck round DO while it was stuck in the gun??? It didn't fire, you said, so there was NO force from the round against the bolt. Could not be. A single stuck round could not cause the marks.
__________________
All else being equal (and it almost never is) bigger bullets tend to work better.
44 AMP is online now  
Old Yesterday, 12:36 AM   #4
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 13,972
So the gun fired fine and you're concerned abuot scratches on the breech face? Did you take before and after pictures? Do you know if the scratches were there before you fired it?

If the gun fires as it's supposed to, assume everything is OK and keep firing it. Make sure it's lubed and cleaend properly after each range session.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:31 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.04569 seconds with 10 queries