The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools Search this Thread
Old March 12, 2009, 06:13 PM   #1
Waketurb007
Member
 
Join Date: April 1, 2008
Posts: 21
Sucess Story and A Question or 2

Well, after reading a lot, asking questions, and even making a few mistakes I finally had a chance to test my first reloads. I was not testing for anything other then that they safely go bang. They all did although I did have a few FTE's.

Here is what I reloaded: 9MM, with Berry's 115 grain RN, Clay's powder using LRN data giving me 3.0 grains, OAL of 1.10

Like I said, I did have a few FTE, anyone have suggestions on why this may have occurred and what to do to prevent this from happening again? Also, how many times can you use the media in a tumbler before it has to be changed? How will you know it needs changed?

Thanks for all the help.
Waketurb007 is offline  
Old March 12, 2009, 07:18 PM   #2
The_Vigilante
Senior Member
 
Join Date: May 17, 2008
Location: Far West Texas
Posts: 200
Sucess Story and A Question or 2

It is probably because this load is not enough to run your gun. Need to either bump it up some or find another powder where you can bump up the load. Clay's is an extremely fast powder!!!
__________________
The_Vigilante
Keeping the streets safe!
A man can never own enough guns!
The_Vigilante is offline  
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:27 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2021 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.03417 seconds with 10 queries