![]() |
|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Search this Thread |
![]() |
#8051 |
Senior Member
Join Date: June 1, 2005
Posts: 4,443
|
|
![]() |
![]() |
#8052 |
Junior Member
Join Date: August 5, 2019
Posts: 2
|
I'm trying to find out the age of a S&W 41 Mag Model 57. Serial # 835927. Have tried various links with no luck...Thanks
|
![]() |
![]() |
#8053 | |
Senior Member
Join Date: September 8, 2004
Location: Nevada
Posts: 537
|
Quote:
If so, this revolver was made between 1980-1983. Model 57 revolvers go back to 1964. If the serial number turns out to be something different, perhaps provide photos next time.
__________________
(former) Glock Armorer 1911 Armorer LEO (retired) |
|
![]() |
![]() |
#8054 |
Junior Member
Join Date: August 5, 2019
Posts: 2
|
L2 is does have the letter N. Thank you for the information
|
![]() |
![]() |
#8055 |
Junior Member
Join Date: August 22, 2019
Posts: 1
|
Tamara
AVW7915 Model 60 Could it be MID to LATE 80's? Thanks, Jim Hathaway in AZ Last edited by jhatha; August 22, 2019 at 02:38 PM. |
![]() |
![]() |
#8056 |
Senior Member
Join Date: June 1, 2005
Posts: 4,443
|
|
![]() |
![]() |
#8057 |
Junior Member
Join Date: February 4, 2010
Posts: 13
|
Model 36
Model 36 Serial number 79190
|
![]() |
![]() |
#8058 |
Senior Member
Join Date: June 1, 2005
Posts: 4,443
|
|
![]() |
![]() |
#8059 |
Junior Member
Join Date: February 4, 2010
Posts: 13
|
Model 36
The number on the bottom of the grip is 342J37
|
![]() |
![]() |
#8060 |
Junior Member
Join Date: February 4, 2010
Posts: 13
|
Thanks for the information
|
![]() |
![]() |
#8061 |
Senior Member
Join Date: June 1, 2005
Posts: 4,443
|
|
![]() |
![]() |
#8062 |
Junior Member
Join Date: February 4, 2010
Posts: 13
|
Model 36
Thanks, Jim, much appreciated
|
![]() |
![]() |
#8063 |
Junior Member
Join Date: August 31, 2019
Posts: 1
|
Smith and Wesson 44 Special ctg
My wife's grandmother has a gun that belonged to her late husband and is curious about it's age.
The gun itself has smith and wesson stamped on the left side of the barrel (the side the cylinder opens on) and 44 special ctg on the right side of the barrel. The butt of the gun and the shroud list the following number: 329xx The cylinder when opened lists C787xx. The C is stamped above the 5 digits. The 5 digits are on the frame itself and on the cylinder arm once it's opened. Any help is appreciated. |
![]() |
![]() |
#8064 | |
Senior Member
Join Date: June 1, 2005
Posts: 4,443
|
Quote:
There were 4976 manufactured between 1926 to 1941 in the 28358 to 61412 serial number range. The 2nd Model, which ran from 1915 to 1940 with a starting SN of 15376, does not have a barrel shroud protecting the ejector. The other numbers / letters are assembly numbers. Jim |
|
![]() |
![]() |
#8065 |
Junior Member
Join Date: September 2, 2019
Posts: 1
|
S&W 686
Please identify the year and type of S&W 686. The serial number is AFH5804. Thank you.
Last edited by Scott_K; September 3, 2019 at 11:33 AM. |
![]() |
![]() |
#8066 |
Senior Member
Join Date: June 1, 2005
Posts: 4,443
|
|
![]() |
![]() |
#8067 |
Senior Member
Join Date: November 11, 2006
Posts: 2,522
|
Mfging date for aS&W M59
SN:A3367XX
Thanks. |
![]() |
![]() |
#8068 |
Senior Member
Join Date: June 1, 2005
Posts: 4,443
|
|
![]() |
![]() |
#8069 |
Member
Join Date: March 19, 2013
Location: southwest nh
Posts: 20
|
double stamped
I'm looking for date of manufacture and any other information about my revolver. The serial number is 9710. The stamping on the cylinder is over another 4 digit number that I believe ends in 83. Thank you, Papazip
|
![]() |
![]() |
#8070 | |
Senior Member
Join Date: June 1, 2005
Posts: 4,443
|
Quote:
What is the exact chambering (caliber) stamped on the side of the barrel. Is it a 5 or 6 shot? Modern swing out cylinder or older tip down barrel to load? The serial number will be stamped on the underside of the grip frame. Jim |
|
![]() |
![]() |
#8071 |
Member
Join Date: March 19, 2013
Location: southwest nh
Posts: 20
|
double stamped
Thanks for getting back to me. The gun is a 6 shot Hand Ejector in 32 Winchester CTG. 9710 is stamped on the butt, the rear of the cylinder, and under the barrel in the ejector rod cavity.
|
![]() |
![]() |
#8072 | |
Senior Member
Join Date: June 1, 2005
Posts: 4,443
|
Quote:
Serial numbers ran from 5312 in 1902 to 9811 in 1905. Jim |
|
![]() |
![]() |
#8073 |
Member
Join Date: September 11, 2019
Posts: 16
|
Just got a model 64-3 new in the box. Unfired. Can you believe that! I’m sorry, just excited. Would you date it for me.
1D58XXX Heavy barrel Square butt Thanks a lot |
![]() |
![]() |
#8074 |
Senior Member
Join Date: June 1, 2005
Posts: 4,443
|
|
![]() |
![]() |
#8075 |
Junior Member
Join Date: September 30, 2019
Posts: 1
|
Can someone please help me with what year my .38 spl snub nose mod 10-7 was made? Serial # 18D0XXX any help would be greatly appreciated!
Edit: I think I figured it out. From what I've found it was made in '77 Last edited by Wilson8807; September 30, 2019 at 11:01 PM. |
![]() |
![]() |
Tags |
s&w 686 |
Thread Tools | Search this Thread |
|
|