The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Reply
 
Thread Tools Search this Thread
Old January 11, 2018, 01:43 PM   #1
Medicpelle
Junior Member
 
Join Date: January 11, 2018
Posts: 2
Browning Model 30 Question

Recently picked up a Browning Model 30 in great shape but I am not familiar with this gun. The gun came with two barrels, 26" and 30". Neither barrels look to be able to accept a traditional threaded choke. Are these barrels pre-choked as in diameter or is there a certain choke that I would have to purchase?
Medicpelle is offline  
Old January 11, 2018, 11:24 PM   #2
Virginian
Senior Member
 
Join Date: February 11, 2012
Location: Williamsburg, Va.
Posts: 1,342
That should be a BPS. I thought they all had choke tubes but I guess some early ones did not. The fixed choke designation will be denoted by the number of stars on the barrel near the receiver. I would bet one is Full and one is IMP Cyl. If it fits and feels good to you, it is a very good pump gun. Make sure you can reach the fore end easily because if you hold it way back your hand will block the ejection - the notch in the bottom rear of the fore end.
__________________
What could have happened... did.

I do not trust Remington's dating service accuracy. If they were Match.com, you could end up with Nancy Pelosi.
Virginian is offline  
Old January 12, 2018, 01:21 PM   #3
Medicpelle
Junior Member
 
Join Date: January 11, 2018
Posts: 2
Thank you for the reply, The 30" has one star and the 26" has two stars. I would guess that the 30" is full and the 26" is IMP.
Medicpelle is offline  
Old January 12, 2018, 07:01 PM   #4
BigJimP
Senior Member
 
Join Date: February 23, 2005
Posts: 13,197
I don't think its actually a Browning manufactured shotgun...I think its probably a Stevens or a Westernfield - produced on the Browning design. It may have a patent saying Browning on it ...but I don't think Browning actually produced a model 30.

( Back in the day )...I think those guns were sold thru Montgomery Wards or Gambles..( at least out here in the Western US ).

If they used the Browning Choke marks for fixed choke barrels...one star is Full and 2 Stars is Modified.

Screw in chokes did not show up until much later than that gun was produced / they started on some models in the early 80's.
BigJimP is offline  
Old January 14, 2018, 11:49 PM   #5
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 13,179
The Browning Model 30 was what the BPS was called before it was the BPS.

And FWIW, Browning is a marketing/distribution company, they do not make anything.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Old January 15, 2018, 01:11 AM   #6
MGMorden
Senior Member
 
Join Date: April 3, 2006
Posts: 135
Could be either. As noted the BPS used to be called the "Model 30", but Sears also marketed the "Ranger 30" as well that was a rebranded Stevens 520. Because it was a Browning design and had a Browning patent number on it I've commonly seen people refer to those as a "Browning Ranger 30" (since these generally don't have "Sears" or any of their other store brand monikers on them).

If you can't post a picture easiest way to tell would be that the Ranger 30 ejects shells out of the side of the receiver while a BPS/Model 30 ejects out of the bottom.
MGMorden is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:56 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.04459 seconds with 9 queries