|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
September 20, 2000, 01:31 AM | #1 |
Member
Join Date: August 22, 2000
Location: NY/CT
Posts: 90
|
What is the best way to free up a 1911 slide that won't move. It has been stored in a damp basement for a few months. There are no external signs of rust or corosion. I sprayed G96 into the bore and up the magazine hole. Hope that will do it. Any suggestions?
Thanks, Mike |
September 20, 2000, 02:20 AM | #2 |
Senior Member
Join Date: February 18, 2000
Location: Anchorage AK
Posts: 237
|
Take what parts off you can, recoil spring plug, take a rubber or plastic tip hammer and tap on the muzzle of the barrel to see if you can get the barrel and slide to unlock, and tap on the side of the slide a little. Might be best to remove all parts if you can, main spring housing, hammer and sear.
|
Thread Tools | Search this Thread |
|
|