The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Art of the Rifle: Semi-automatics

Reply
 
Thread Tools Search this Thread
Old September 8, 2018, 11:56 AM   #1
TJB101
Senior Member
 
Join Date: January 2, 2017
Posts: 257
Aero Precision AR 5.56

Looking to purchase the following used rifle. Aero Precision lower with Larue trigger, Aero upper with 20” Bear creek heavy barrel, 1:7 and what looks be a fairly nice break. $500 .... thoughts on manufacturer and price.

Thanks, Tim

TJB101 is offline  
Old September 8, 2018, 12:41 PM   #2
lordmorgul
Member
 
Join Date: August 18, 2016
Posts: 99
Quote:
Originally Posted by TJB101 View Post
Looking to purchase the following used rifle. Aero Precision lower with Larue trigger, Aero upper with 20” Bear creek heavy barrel, 1:7 and what looks be a fairly nice break. $500 .... thoughts on manufacturer and price.

Thanks, Tim



AP makes good equipment. Not familiar with the barrel, but that’s a reasonable price for the package. Key mod is becoming a little less popular but still has options for accessories. The brake looks way heavier than necessary, but try it and replace it later.

This will make a great rifle. Here is my AP 20” SPR, as shown over $1400.



Andrew - Lancaster, CA
NRA Life Member, Calguns.net contributor, CGF / SAF / CRPA / FPC / USCCA member
lordmorgul is offline  
Old September 8, 2018, 12:45 PM   #3
rickyrick
Senior Member
 
Join Date: March 15, 2010
Posts: 6,779
I have lots of aero precision parts, great bang for the buck in my experience. Haven’t used a bear creek barrel though. I’d rather have an A2 stock or similar on a 20” rifle, just my personal preference also. Great price if it performs as it should.
rickyrick is offline  
Old September 8, 2018, 12:49 PM   #4
TJB101
Senior Member
 
Join Date: January 2, 2017
Posts: 257
Appreciate the feedback
TJB101 is offline  
Old September 13, 2018, 12:14 AM   #5
stagpanther
Senior Member
 
Join Date: March 2, 2014
Posts: 5,031
That's a pretty good price considering the parts--you can always toss the barrel and replace it with something better if needs be.
__________________
I screw things up--so you don't have to.
I am NOT an expert--I do not have any formal experience or certification in firearms use or testing; use any information I post at your own risk!
stagpanther is offline  
Old September 13, 2018, 03:03 AM   #6
armoredman
Senior Member
 
Join Date: May 22, 2007
Location: Arizona
Posts: 4,674
I was told on another forum, as I am trying to acquire parts for my very first build, that Bear Creek barrels are to be avoided at all costs. I do not really understand why, know VERY little about AR's yet, just passing it along. Can you get a chance to test fire it? I have an Aero upper and hand guard, waiting to get BCG, barrel, and gas system for that myself.
armoredman is offline  
Old September 13, 2018, 05:22 AM   #7
TJB101
Senior Member
 
Join Date: January 2, 2017
Posts: 257
Quote:
Originally Posted by armoredman View Post
I was told on another forum, as I am trying to acquire parts for my very first build, that Bear Creek barrels are to be avoided at all costs. I do not really understand why, know VERY little about AR's yet, just passing it along. Can you get a chance to test fire it? I have an Aero upper and hand guard, waiting to get BCG, barrel, and gas system for that myself.

I did the buy this past weekend. I’ll be heading to the range this coming weekend and hope to get decent accuracy.

Thanks for the follow up comment.
TJB101 is offline  
Old September 13, 2018, 05:53 AM   #8
stagpanther
Senior Member
 
Join Date: March 2, 2014
Posts: 5,031
Quote:
I did the buy this past weekend. I’ll be heading to the range this coming weekend and hope to get decent accuracy.

Thanks for the follow up comment.
Treat as a new gun--meaning inspect, strip, clean and lubricate. All kinds of knuckleheads have probably handled and goofed with it.
__________________
I screw things up--so you don't have to.
I am NOT an expert--I do not have any formal experience or certification in firearms use or testing; use any information I post at your own risk!
stagpanther is offline  
Old September 13, 2018, 07:13 AM   #9
TJB101
Senior Member
 
Join Date: January 2, 2017
Posts: 257
Quote:
Originally Posted by stagpanther View Post
Treat as a new gun--meaning inspect, strip, clean and lubricate. All kinds of knuckleheads have probably handled and goofed with it.

Absolutely ... did that the weekend I brought it home. Bolt looked brand new outside of a little carbon on the bolt assembly itself. The barrel was quite dirty ... spent the most time on it. Upper and lower tolerance was very tight. Upper was an Anchor Harvey and lower stamped AP.

Happy with the components... see this weekend how she shoots. Will use my sled to take the shooter out of the equation. Tossed my Vortex on and bore sighted it. (It never looked right on my Henry).
TJB101 is offline  
Old September 14, 2018, 03:35 AM   #10
armoredman
Senior Member
 
Join Date: May 22, 2007
Location: Arizona
Posts: 4,674
What is incredibly fascinating is AFTER I posted that I was offered a free Bear Creek barrel to try out for myself. Can't pass THAT up!
armoredman is offline  
Old September 14, 2018, 05:09 AM   #11
TJB101
Senior Member
 
Join Date: January 2, 2017
Posts: 257
Quote:
Originally Posted by armoredman View Post
What is incredibly fascinating is AFTER I posted that I was offered a free Bear Creek barrel to try out for myself. Can't pass THAT up!

Let’s compare notes.
TJB101 is offline  
Old September 14, 2018, 06:11 AM   #12
Mobuck
Senior Member
 
Join Date: February 2, 2010
Posts: 6,158
BCA barrels are econo grade and I'd throw the muzzle brake as far as possible.
I've tried 3 or 4 BCA barrels and found ZERO that were what I'd call accurate. Maybe with that one specific load but not with any of the variety of ammo that turns up sub-MOA from multiple other AR type rifles. I just assembled a pair of 18" rifle gas uppers using BCA barrels to test a theory. Neither has shown a group under 1" using several types of factory ammo that have been known to produce cloverleaf groups in other moderately priced barrels.
Another BCA barrel (6.5 Grendel) gives 2-3" groups with Wolf(understandable) but is still in the 1.5 MOA category using high quality Hornady ammo.
Sort of there but just not quite would be my review of BCA barrels. If you have a low budget and moderate expectations--that's your brand.
Mobuck is offline  
Old September 14, 2018, 06:15 AM   #13
TJB101
Senior Member
 
Join Date: January 2, 2017
Posts: 257
My Savage 10PC is sub MOA - my go-to for precision .... I’ll be happy with ‘moderate accuracy’ with this new AR. More of a fun gun for me.
TJB101 is offline  
Old September 14, 2018, 06:22 AM   #14
stagpanther
Senior Member
 
Join Date: March 2, 2014
Posts: 5,031
Get an ARP barrel--very affordable--and in general unusual if it can't get you .5 MOA or better, at least in my experience using handloads.
__________________
I screw things up--so you don't have to.
I am NOT an expert--I do not have any formal experience or certification in firearms use or testing; use any information I post at your own risk!
stagpanther is offline  
Old September 15, 2018, 10:29 AM   #15
TJB101
Senior Member
 
Join Date: January 2, 2017
Posts: 257
Range Day... 6 shots and I was sighted in and sub MOA at 50 yards... tossed another 30 rounds into the target. Went to 100 yards and I was about 1 MOA ... I’m happy with that for a fun range gun. I think I need to add a riser or higher rings though. Just a tad too low.
TJB101 is offline  
Old September 15, 2018, 11:21 AM   #16
stagpanther
Senior Member
 
Join Date: March 2, 2014
Posts: 5,031
congrats!
__________________
I screw things up--so you don't have to.
I am NOT an expert--I do not have any formal experience or certification in firearms use or testing; use any information I post at your own risk!
stagpanther is offline  
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:02 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2018 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.11388 seconds with 10 queries