|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
February 26, 2013, 11:40 PM | #1 |
Senior Member
Join Date: January 29, 2005
Location: Southern California
Posts: 344
|
Gun Show not sure what I got
Found myself in Phoenix this past weekend and dropped into the gun show going on there.
The place was crowded as expected. I was doing casual shopping keeping an eye open for primers, dies, tools and molds. Lots of Cap and Ball revolvers but prices were more than I had to spend this time. Since I'm from out of state I was limited to these and there were a lot of nice pieces. Then off in a dark corner I came across a guy and his wife selling a hodge podge of assorted old stuff that looked like it came out of some guy's shop. Sure enough, he was selling off a relatives old gun shop of junk. And it was JUNK! But one item caught my eye. An old CVA 1860(?) kit that was never finished! He had it marked for $80. I handled it and saw how rough it was but it called to me. what a cool project this would make. I offered $20.00 he laughed and I set it down. He said he'd take $60.00 I offered $25.00 and picked it back up. He said $50.00 I said $26.00 He hummed to himself. His wife slapped his shoulder and said for crying out loud sell the dang thing! And he took my $26 bucks!!! I walked away grinning and tucked the gun in my belt to finish walking the show. I got 4 offers one as high as $80 while I walked around! But I wanted to bring him home to see what I could do with him. What do you guys think of my $26 gun? Markings show CVA and ASM |
February 26, 2013, 11:49 PM | #2 |
Senior Member
Join Date: March 20, 2011
Posts: 566
|
Nice! Looks like it has a copy of a Colt roll engraved cylinder made before Colt sued the Italian gunmakers.
|
February 27, 2013, 12:10 AM | #3 |
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 21,841
|
good score
Note to self: Make sure seller's frustrated wife is around when you want to buy something.
ETA. I think it's a cold rust blue.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe! |
February 27, 2013, 01:11 AM | #4 |
Senior Member
Join Date: January 10, 2011
Location: Leesville SC
Posts: 2,654
|
Awesome!! What a deal!!! I like the way it looks now all rough and tough looking. If it were mine I would just get it to workin good and leave the finish as is. What are your plans for it? Nice Score.
__________________
"I prefer dangerous freedom over peaceful slavery." - Thomas Jefferson |
February 27, 2013, 05:31 AM | #5 |
Senior Member
Join Date: January 7, 2012
Location: Auburn, AL.
Posts: 2,332
|
You're a better mule trader than me!
I'd have slapped the $60 down and ran for the car before somebody else saw it. lol
__________________
. . . Have a Colt and a smile. |
February 27, 2013, 05:32 AM | #6 | |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,190
|
Quote:
|
|
February 27, 2013, 06:55 AM | #7 |
Senior Member
Join Date: October 24, 2008
Location: Naples, Fl
Posts: 5,440
|
Yep...
Definitely a good score, Rig.
Steel frame kit is rarer than the brass kits. Most of them (I think) were made by ASM. If you need internals, I have substituted the thirty dollar parts kit from Cabela's successfully but with a little fitting. Very nice find. I think you could easily break it up and get 150.00 for the parts. On the other hand, I have found my ASMs to be good shooting revolvers for light duty. If it were me, I'd fix it and shoot it.
__________________
Seek truth. Relax. Take a breath. |
February 27, 2013, 09:19 AM | #8 |
Senior Member
Join Date: September 7, 2012
Location: Crockett, Texas
Posts: 363
|
I like it, and ya can't beat the price!
__________________
"I'm your huckleberry, it's just my game" |
February 27, 2013, 09:20 AM | #9 |
Senior Member
Join Date: December 2, 2012
Posts: 190
|
I'm not that handy so I'd probably send it to someone who can polish that baby and give it case-color and charcoal blue. I'll bet you'd still have less than $250 in it.. Of course if you are handy you could polish it up, finish the grips with some nice oil, brown or blue the rest and have less than $50.00 it... Nice score either way!
|
February 27, 2013, 10:32 AM | #10 |
Senior Member
Join Date: January 29, 2005
Location: Southern California
Posts: 344
|
Thanks guys, I think I did good as well.
I'm not sure what I'm going to do with it exactly. I know I want to finish the stocks or replace them depending on whether or not I go for a full finish restore or leave it rough looking. I sorta like it looking all tarnished and such but not sure just yet. I completely disassembled it to get a good look at the internals and it really doesn't look as though it's been fired. There is a little bit of rust clean up that needs to be done and I doubt it's ever seen a drop of oil ever. All parts look good but need some attention and and some smoothing and buffing. I'll need to buy a set of cones/nipples right away. I only have extras for my Dragoons and they don't fit of course. Parting it out did cross my mind but I cant bring myself to do that. I did notice when comparing it to pictures of other like it that there seem to be two screws on the frame that I believe are for notching into a shoulder stock. Can anyone look at those and confirm or reject my belief? If I'm right I'd love to hear more about that feature. Thanks again guys. |
February 27, 2013, 10:45 AM | #11 |
Senior Member
Join Date: December 2, 2012
Posts: 190
|
Absolutely a crime to part that out. I'm sure it'll be a fine little shooter. Since it's "in the white" you have the opportunity to easily defarb the piece. Get rid of the Italian and CVA marks polish the metalwork and finish the grips. They should be good with a bit of elbow grease and some Danish Oil finish, medium or dark walnut works great here...
It is the Army model cut for a shoulder stock as evidenced by the notches at the bottom of the recoil shield and the extra screws on the frame. There should be a cut on the bottom rear of the grip frame as well. Whatever you do, there are lots of guys here with lots of experience with these guns and they're as helpful a bunch as you'll find anywhere. Keep us posted! |
February 27, 2013, 11:04 AM | #12 |
Senior Member
Join Date: January 29, 2005
Location: Southern California
Posts: 344
|
I've heard about "defarbing" but never was in a position to consider it until now.
Any links to the process would be appreciated. Thanks for the confirmation on the rifle stock features. I image getting one would be a tough challenge. |
February 27, 2013, 11:13 AM | #13 |
Senior Member
Join Date: September 19, 2008
Posts: 4,678
|
.
BTW - At what point did you remove your bandito mask ? . . . |
February 27, 2013, 11:50 AM | #14 |
Senior Member
Join Date: December 2, 2012
Posts: 190
|
You might try this link for a good discussion of defarbing.
http://thefiringline.com/forums/show...ghlight=defarb Most guys use burnishing tools, basically hardened steel rubbed over the area you're cleaning up, the metal "moves around" and the stamped markings disappear. The most glaring ones on your piece seem to be the CVA stamp on the frame, everything else looks pretty clean but could benefit from sanding/polishing. Search the site also for antiquing if you're into that look, some of these guys have created some very nice original looking guns.. |
February 27, 2013, 11:53 AM | #15 |
Senior Member
Join Date: January 29, 2005
Location: Southern California
Posts: 344
|
Bandit mask stayed on until I left the parking lot
|
February 27, 2013, 11:54 AM | #16 |
Senior Member
Join Date: January 29, 2005
Location: Southern California
Posts: 344
|
Wood, Thanks for the link. I'll be going there shortly.
|
February 27, 2013, 01:41 PM | #17 |
Staff
Join Date: November 2, 1998
Location: Colorado
Posts: 21,841
|
I told a classmate and he replied that guys manning a garage sale table who look happy are asking for a lot of money. Guys who look like they don't want to be there are there because their wives made them sell their stuff.
__________________
Vigilantibus et non dormientibus jura subveniunt. Molon Labe! |
February 27, 2013, 04:00 PM | #18 |
Senior Member
Join Date: September 7, 2012
Location: Crockett, Texas
Posts: 363
|
I would defarb it, but leave it old and kinda rough and weathered like it is. It really is a great look, and with some new nipples, I bet it will make an awesome shooter!
__________________
"I'm your huckleberry, it's just my game" |
February 27, 2013, 06:34 PM | #19 | |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,190
|
Quote:
|
|
February 27, 2013, 07:31 PM | #20 |
Senior Member
Join Date: November 19, 2009
Posts: 3,287
|
Rigmarol . . better watch out . . . I'm in AZ for the winters and in some parts, they still hang horse thieves and those who steal a guy's hog leg!
Congrats on your find! I think you did real well on it and we look forward to seeing it when you get it all polished up! You certainly can't go wrong at that price. My wife and I were up in Prescott & Prescott Valley over the weekend and I saw on the news that there was a big gun show - just didn't have time to fit it in as we had other things to do. From what I saw on the news, there were some "antis" having a snit but hope that didn't affect the show any. Keep us posted on your progress on the Army . . . looks like a great project! Thanks for sharing!
__________________
If a pair of '51 Navies were good enough for Billy Hickok, then a single Navy on my right hip is good enough for me . . . besides . . . I'm probably only half as good as he was anyways. Hiram's Rangers Badge #63 |
February 27, 2013, 10:03 PM | #21 |
Senior Member
Join Date: January 29, 2005
Location: Southern California
Posts: 344
|
The problem with hanging theives in AZ is you gotta find a tree first!!! at least that's the impression I got. LOL.
I'm back home in CA now so I'm laying low so as to not draw undue attention otherwise my state reps will be here to take it away! The more I look at it, the more I think I want to keep it in the white. If I try to defarb it, It might lose the look and get all shinny... I dunno for sure we'll see how it progresses. I have some internal slicking up and buffing out to do and some nipples to buy and the stock to finish up. Some uneven gaps that I think I can fix. Got some little tasks that should keep me busy for a little bit. When I got back from the show our friends were asking about the "Anti's demontration" ... huh? I said. I guess it was all over the news but I never saw nobody. There were a couple ammo sellers that had security guards to regulate the loooong lines to purchase ammo though I never saw that before. |
February 27, 2013, 11:02 PM | #22 |
Senior Member
Join Date: September 21, 2012
Posts: 144
|
I think you got a screaming deal!
I did an ASP (Armi San Paolo) '60 Army kit much like that one 25 years ago...it's still in my safe and one of my favorites today!
__________________
"You gonna pull those pistols, or whistle Dixie?" |
March 2, 2013, 09:18 PM | #23 |
Senior Member
Join Date: May 19, 1999
Location: Near Helena, Montana
Posts: 1,719
|
What a rip off! New ones only went for maybe $20... in the 1860's. I suppose they would have brought $26 easily enough in the California or Alaska gold fields at the time.
Good find.
__________________
Sometimes the squeaky wheel gets replaced... SASS 47015 |
March 2, 2013, 10:33 PM | #24 |
Member In Memoriam
Join Date: March 17, 1999
Posts: 24,383
|
I don't suggest removing any markings. As it is, it is an honest repro. If markings are removed it will look like a piece of complete junk that someone has messed with and maybe tried to pass off as original.
Jim |
March 3, 2013, 02:27 AM | #25 |
Senior Member
Join Date: September 8, 2007
Location: Mississippi
Posts: 16,190
|
Removing markings wont make it look like junk, not to most people anyway. A lot of people do it for personal satisfaction. Its not going to fool anybody unless new markings are added. I did it to one of mine and then rusted it up and smoothed it off. It looks like a 150 year old gun except it has no markings whatsoever. It wasn't done to fool anybody.
|
|
|