The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old February 27, 2012, 09:29 PM   #5101
oldwolf
Junior Member
 
Join Date: April 22, 2005
Location: North Carolina
Posts: 11
I just picked up a S&W 4506 with serial # TEP03xx. I am guessing it was built in the 90's. Can you give me a year that it was manufactured? Thanks for doing all of this research. 205 pages is a long thread.
oldwolf is offline  
Old February 27, 2012, 10:12 PM   #5102
capptainclutch
Junior Member
 
Join Date: February 26, 2012
Posts: 2
Thanks redscho and Dave Anderson.
capptainclutch is offline  
Old February 27, 2012, 10:30 PM   #5103
Dave Anderson
Senior Member
 
Join Date: March 4, 2011
Posts: 313
Quote:
686 with s/n aua00xx?
1987

Quote:
s&w 4506 with serial # tep03xx
1990
Dave Anderson is offline  
Old February 27, 2012, 11:02 PM   #5104
boice1971
Junior Member
 
Join Date: January 25, 2012
Posts: 7
Thank you Dave Anderson.
boice1971 is offline  
Old February 28, 2012, 05:18 AM   #5105
harry64
Junior Member
 
Join Date: February 27, 2012
Posts: 4
Hi everybody, i need to know if my Smith&Wesson 29-2 was made in late 1972 or in erly 1973?
Serial number is : N753xx
Thanks.
harry64 is offline  
Old February 28, 2012, 10:08 AM   #5106
redscho
Junior Member
 
Join Date: September 23, 2008
Location: Newberry, FL
Posts: 12
1972-73 S/N N60001 to N190000
redscho is offline  
Old February 28, 2012, 10:41 AM   #5107
harry64
Junior Member
 
Join Date: February 27, 2012
Posts: 4
Hi redscho, could be it an early 1972!?
harry64 is offline  
Old February 28, 2012, 10:46 AM   #5108
redscho
Junior Member
 
Join Date: September 23, 2008
Location: Newberry, FL
Posts: 12
Probably, your S/N is a lot closer to the beginning 72 number.
redscho is offline  
Old February 28, 2012, 11:32 AM   #5109
oldwolf
Junior Member
 
Join Date: April 22, 2005
Location: North Carolina
Posts: 11
Thank you Dave.

Quote:
Quote:
s&w 4506 with serial # tep03xx
1990
oldwolf is offline  
Old February 28, 2012, 03:24 PM   #5110
huntxtrm
Junior Member
 
Join Date: February 28, 2012
Posts: 2
I have a model 29-2 nickle N864xxx can you tell me when it was made? Value? had a guy offer me, want to make sure its right. thanks
huntxtrm is offline  
Old February 28, 2012, 07:28 PM   #5111
Dave Anderson
Senior Member
 
Join Date: March 4, 2011
Posts: 313
Quote:
I have a model 29-2 nickle N864xxx can you tell me when it was made? Value? had a guy offer me, want to make sure its right. thanks
SCSW says the N800000 numbers were used 1980 - 1983. Since yours is a 29-2 it would have been made before 1982 when the 29-3 model appeared.

Too many unknowns to hazard a guess as to value, e.g. condition, barrel length, accessories (original box, papers etc.). Yours has a pinned barrel and recessed chambers ("P&R") which most shooters and collectors feel adds to value.

I suggest you do a search at some of the gun trading web sites such as www.gunsamerica.com, www.gunbroker.com, www.gunsinternational.com. This will give an idea of asking prices at least (though asking price and selling price aren't always the same!)
Dave Anderson is offline  
Old February 28, 2012, 08:07 PM   #5112
skibum80
Junior Member
 
Join Date: February 28, 2012
Posts: 2
I was out of town visiting with my wife's Grandfather and he is asking me to research the age of a Smith and Wesson, model 10(I think) 6 shot revolver that he has. It is a double acting revolver with a laynard ring on the bottom. I found a serial number of 696xxx on the butt next to the ring, no prefix. The right side of the barrel had a stamp of .38 S & W. I believe it is either a 4" or 5" barrel. Unfortunately, I did not take any pictures.

Any information in regards to the age and value would be appreciated.

Last edited by skibum80; February 28, 2012 at 08:29 PM.
skibum80 is offline  
Old February 28, 2012, 08:42 PM   #5113
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
I found a serial number of 696xxx on the butt next to the ring, no prefix. The right side of the barrel had a stamp of .38 S & W.
Late 1930's.
It's likely a .38/200 British Service Revolver (Model K-200). S&W made these for England a few years before and during WWII. They are chambered in 38S&W, not to be confused with the more common 38 special.

Jim
laytonj1 is offline  
Old February 29, 2012, 02:51 AM   #5114
harry64
Junior Member
 
Join Date: February 27, 2012
Posts: 4
Quote:
Probably, your S/N is a lot closer to the beginning 72 number
Thank you redscho
harry64 is offline  
Old February 29, 2012, 10:42 AM   #5115
Bronx1943
Junior Member
 
Join Date: February 29, 2012
Location: TN
Posts: 1
Found this old rustbucket not sur of the model, I believe the serial # is 300410 found on the grip base, 6" pinned barrel feels like the weight of a K frame, its marked 38 special
Bronx1943 is offline  
Old February 29, 2012, 11:00 AM   #5116
skibum80
Junior Member
 
Join Date: February 28, 2012
Posts: 2
Quote:
Late 1930's.
It's likely a .38/200 British Service Revolver (Model K-200). S&W made these for England a few years before and during WWII. They are chambered in 38S&W, not to be confused with the more common 38 special.

Thanks Jim. That has been my confusion in reading up on this revolver, most people have it listed as a .38 special. Thanks again.
skibum80 is offline  
Old February 29, 2012, 06:40 PM   #5117
thirdcoastfisher
Junior Member
 
Join Date: February 29, 2012
Posts: 2


I just got this pistol from my grandfather and found out for the first time that my grandmother's father was supposedly an FBI agent and this was his service revolver.

It's a S&W for sure, but I cannot find a model name nor really determine what caliber it is (he had .38 special rounds with it and that looks to be about right). Model Number 28684X on the bottom of the grip. As you can see its a bit of a rust bucket so I am considering having it restored, but it may just go in a case as is if I am not able to shoot it.
thirdcoastfisher is offline  
Old February 29, 2012, 07:23 PM   #5118
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
serial # is 300410 found on the grip base, 6" pinned barrel feels like the weight of a K frame, its marked 38 special
Most likely a .38 Military & Police 4th change. Serial number dates it to around 1920. It was made before modern heat treating so no +P ammo.

Quote:
Model Number 28684X on the bottom of the grip
.38 Double Action 3rd Model. It is chambered for 38 S&W unless someone tried rechambering it for 38 special.
Serial numbers ran from 119001 in 1884 to 322700 in 1895.
Rather odd gun for an FBI service gun. It was an old gun when the FBI started in 1935.

Edit: After looking at it more, it actually looks more like a .32 caliber.
If that's the case, it would be a 32 Double Action 5th Model.
SN's ran fron 283000 in 1909 to 327641 in 1919.

Jim

Last edited by laytonj1; February 29, 2012 at 07:32 PM.
laytonj1 is offline  
Old February 29, 2012, 07:53 PM   #5119
thirdcoastfisher
Junior Member
 
Join Date: February 29, 2012
Posts: 2
Appreciate it Jim. I plan on taking it in to a gunsmith but really wanted to get an idea of what I have. My grandmother has no idea what he did for the FBI, she knows he went to South America at some point, so I am starting my research into that as well.

This could have just been his personal pistol, not his service weapon. My grandmother is 85 and he was with the FBI (or some other law enforcement agency) when she was a kid, so she doesn't remember much about it.
thirdcoastfisher is offline  
Old March 1, 2012, 07:30 PM   #5120
aerial_22
Junior Member
 
Join Date: March 1, 2012
Posts: 2
Estimated Value of S&W 38 Special

Good evening! I am new to the board. I have an old Smith and Wesson 38 special that was passed down to me from my grandfather. It has a 4" barrel and still has the original patina. The serial number is C231xx. Does anyone know the year this was manufactured and what the current value may be? Many thanks!

Last edited by Glenn E. Meyer; November 30, 2013 at 11:47 AM.
aerial_22 is offline  
Old March 2, 2012, 06:30 PM   #5121
specialized26
Junior Member
 
Join Date: March 2, 2012
Posts: 2
2 S+W Revolvers

Hey everyone, I'm new to the board and I was wondering if anyone could help me out with a ballpark date for two S+W Revolvers. I know the best way is through the factory, but just looking for a general idea. I inherited these guns from a retired detective. The first I believe is a model 10 or M+P the SN is C456xx. The second is a snubby, that I believe is a Chief's Special the SN is 136xx. Both are 38 spl. Any help would be appreciated. Pictures are attached. Thanks again.

Last edited by Glenn E. Meyer; November 30, 2013 at 11:47 AM.
specialized26 is offline  
Old March 2, 2012, 08:21 PM   #5122
bamalefty
Junior Member
 
Join Date: March 2, 2012
Posts: 6
s&w 38spl yr id

i just joined site a few minutes ago been reading posts for last few hours trying to find yr of manufacture on this what im guessing is a chief according to posts it is a 5 shot nickel plated snubnose square butt hard rubber grips left side of barrel has smith & wesson s&w logo on left side below square flat release latch right side of barrel has 38s&w spl plate has 3 screws and 1 screw right above plate even with hammer serial # is 26619 on square butt plate # on yoke is 93071 and has #7 under it im guessing it was made in 1956 from what ive been reading on threads and pieceing together but would like someone with more knowledge and or s&w bible to give it a whirl any help would be appreciated thanks
bamalefty is offline  
Old March 2, 2012, 08:37 PM   #5123
bamalefty
Junior Member
 
Join Date: March 2, 2012
Posts: 6
38 spl

my pistol looks like specialized26 photo but with the black rubber grips which cover the frame and i have no knurls on ejection rod its smooth dont know if they came off or it was made that way
bamalefty is offline  
Old March 2, 2012, 08:41 PM   #5124
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
The serial number is C231xx
Serial numbers ran from C1 in 1948 to C223998 in 1951. Yours is likely 1948/49.
Hard to tell condition from the pic but $300 to $400.

Quote:
The first I believe is a model 10 or M+P the SN is C456xx. The second is a snubby, that I believe is a Chief's Special the SN is 136xx.
As above, serial numbers ran from C1 in 1948 to C223998 in 1951. Yours is likely 1948/49. And it is a M&P which became the Model 10 when S&W began model numbers in 1957.
The Chiefs Special is 1952.

Quote:
serial # is 26619 on square butt
Your Chiefs Special is 1953.

Jim

Last edited by laytonj1; March 2, 2012 at 08:49 PM.
laytonj1 is offline  
Old March 2, 2012, 09:07 PM   #5125
bamalefty
Junior Member
 
Join Date: March 2, 2012
Posts: 6
38 spl

thanks jim guess i guessed pretty close gettn it cleaned up for my mother to carry she got her permit today the action is smooth and crisp for a gun that age thanks again
bamalefty is offline  
Reply

Tags
s&w 686

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:05 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2024 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.49449 seconds with 9 queries