The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old July 30, 2010, 08:04 AM   #3201
KingChaoZ
Junior Member
 
Join Date: July 29, 2010
Posts: 3
M59

Hello all & greetings from Finland, I 'm thinking about buying a S&W M59, can someone help me in determining the manufacturing year for serial A542xxx? Thanks in advance
KingChaoZ is offline  
Old July 30, 2010, 11:46 AM   #3202
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
manufacturing year for serial A542xxx
Serial numbers ran from A475001 in 1978 to A565000 in 1979.
Model 59's are excellent guns.

Jim
laytonj1 is offline  
Old July 30, 2010, 11:47 AM   #3203
Radagast
Senior Member
 
Join Date: July 13, 2001
Posts: 449
King ChaoZ:
1978-1979. Serial range was A475001 to A565000. So 1979 seems probable.
Radagast is offline  
Old July 30, 2010, 12:18 PM   #3204
JohnnyBgood
Junior Member
 
Join Date: July 30, 2010
Posts: 1
S&W Model 15

I recently bought a model 15 ser#1774xx.I thought it was odd because it had a 5-1/2" barrel.(mfg.1953)VG condition.I hope I didn't get burned at $300.00.Any thoughts??
JohnnyBgood is offline  
Old July 30, 2010, 02:29 PM   #3205
KingChaoZ
Junior Member
 
Join Date: July 29, 2010
Posts: 3
Thanks

Thanks very much for the info.. Yep, I'm going to buy that one, I got some warnings about the early models so that's why I'm interested in the manufacturing year for this gun. The price tag is very good also, only about $190.. Once again, thanks guys
KingChaoZ is offline  
Old July 30, 2010, 02:53 PM   #3206
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
I recently bought a model 15 ser#1774xx.I thought it was odd because it had a 5-1/2" barrel.(mfg.1953)VG condition.I hope I didn't get burned at $300.00.Any thoughts??
There should be a "K" prefix for that serial number. It may be a few spaces ahead of the numbers.

The barrel is measured from the muzzle to the forcing cone (at the face of the cylinder). A pre model 15 (combat masterpiece) would have a 4" barrel.
If you you have a 6" barrel then it's a pre model 14 (target masterpiece).
S&W did not start stamping model numbers till around 1957.

Unless it's beat up, $300 is a good price.

Jim
laytonj1 is offline  
Old July 30, 2010, 03:56 PM   #3207
Ceapea
Member
 
Join Date: October 3, 2009
Posts: 21
Year of production for 629-1 ?

S&W 629-1 S/N AYF 4XXX

Thanks
Ceapea is offline  
Old July 30, 2010, 04:24 PM   #3208
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
S&W 629-1 S/N AYF 4XXX
1987.

Jim
laytonj1 is offline  
Old August 1, 2010, 11:30 AM   #3209
zgt
Junior Member
 
Join Date: August 1, 2010
Posts: 6
hi ive got a model 37 with s/n abj18xx can anyone tell me the year thanks in advance
zgt is offline  
Old August 1, 2010, 04:03 PM   #3210
biopump
Junior Member
 
Join Date: August 1, 2010
Posts: 2
Hello everyone, I was hoping someone could help date and, if possible, value my S&W revolver.
On the barrel it says 38 S&W. Special CTG
Serial number 6J7--

Here's an image
Thanks a bunch


Last edited by biopump; August 1, 2010 at 04:14 PM.
biopump is offline  
Old August 1, 2010, 07:18 PM   #3211
OrygunMike
Junior Member
 
Join Date: October 29, 2001
Location: Orygun
Posts: 9
Model 49 - Date of Manufacture?

Hello

I'm hoping to get date information on a Model 49
S/N ACM7014

thanks gang!
OrygunMike is offline  
Old August 1, 2010, 07:28 PM   #3212
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
model 37 with s/n abj18xx
1982.
Quote:
On the barrel it says 38 S&W. Special CTG
Serial number 6J7--
It's a model 36. Made 1971/72.
They generally sell in the $400 range.
Quote:
I'm hoping to get date information on a Model 49
S/N ACM7014
1983.

Jim
laytonj1 is offline  
Old August 1, 2010, 11:39 PM   #3213
biopump
Junior Member
 
Join Date: August 1, 2010
Posts: 2
Thanks Jim, appreciate it.
biopump is offline  
Old August 2, 2010, 06:34 PM   #3214
zgt
Junior Member
 
Join Date: August 1, 2010
Posts: 6
thanks man
zgt is offline  
Old August 2, 2010, 10:53 PM   #3215
redhill
Junior Member
 
Join Date: August 2, 2010
Posts: 6
Help with S&W Identification and Value Appreciated

Hello,

I inherited a Smith & Wesson from my grandfather (who was a customs officer) and would sincerely appreciate any help ID'ing it further.

The side of the barrel states "38 S&W SPECIAL CTG."

The serial number is: 1K13xxx

Behind the trigger it states: PACHMAYR GUN WKS.

Any idea when this gun was manufactured or any other specifics?

Any thoughts as to value?

Any information sincerely appreciated!
redhill is offline  
Old August 2, 2010, 10:56 PM   #3216
redhill
Junior Member
 
Join Date: August 2, 2010
Posts: 6
PS: It looks almost identical to the picture above!
redhill is offline  
Old August 2, 2010, 11:16 PM   #3217
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
The serial number is: 1K13xxx
The serial number dates it to 1970.
The "K" in the serial number identifies it as an adjustable sighted K frame.
So, you either have a model 14 or 15. If you open the cylinder you will see the model number stamped on the frame cutout. (see pic).

Jim

This is a model 629-1.
laytonj1 is offline  
Old August 2, 2010, 11:26 PM   #3218
redhill
Junior Member
 
Join Date: August 2, 2010
Posts: 6
Jim,

Thanks so much for the prompt reply!

Man, your good ;]

It says 15-3.

Is this a pretty standard issue?

Any idea how much it might be worth if sold through...say....gunbroker.com?

Would it matter if it was owned by a customs officer?

I am in a pretty big bind financially and it breaks my heart to consider selling it...

Anyway, thanks again for any insight. It is sincerely appreciated.
redhill is offline  
Old August 2, 2010, 11:46 PM   #3219
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Yes, they are common but desirable too.
Value depends on condition, barrel length and finish.

A 4" blued with minor blueing wear (tip of barrel, sharp edges) $350 to $375 range.
Allot of wear or dings/scratches, about $300 to $325.
Like new, no wear, $400 to $450.
If 2" barrel, add $50.
If nickel, add about $50.

These prices are only approximate and my opinion, if sold privately. If sold to a gun shop, subtract $100.

Jim

Edit: It came with factory wood grips. If they've been replaced with rubber then subtract another $25 - $35.

Last edited by laytonj1; August 2, 2010 at 11:53 PM.
laytonj1 is offline  
Old August 3, 2010, 12:03 AM   #3220
redhill
Junior Member
 
Join Date: August 2, 2010
Posts: 6
Hey Jim,

Thanks again.

Please check the attachment (pic) as I have no idea about these specifics.

I can tell you that it is very clean - I can find no dings or marking apart from fingerprints...

Lastly, do you think gunbroker is a good way to go?

I don't think I would part with it for less than $400...

Last edited by Glenn E. Meyer; November 30, 2013 at 11:47 AM.
redhill is offline  
Old August 3, 2010, 12:26 AM   #3221
Luke1234
Junior Member
 
Join Date: August 3, 2010
Posts: 2
S and W 38 special ctg

I've got a Smith 38 special ctg with a US Navy stamp with an ID of V 163216 on barrel and on stock ID of V163216. Anyone know the year made and value?
Thank you, much appreciated...
Luke1234 is offline  
Old August 3, 2010, 12:42 AM   #3222
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Redhill,

From the pic, yeah, it looks good. Definitely worth $400.
That said, I have bought and sold many guns on gunbroker.
The problem you run into when selling guns on the auction sites is the buyer has to pick up the cost of shipping and the FFL transfer.
Without getting too detailed, unless your're an FFL, you're looking at an average of $50 for shipping and $25 for FFL transfer on their end. Plus Gunbroker gets about 5% from you when it sells. This is not a big deal on an expensive gun but on a $400 gun the buyer is looking at around $475 to get it in his hands, and he's buying it sight unseen. So... it may be harder to get that $400. Lots of good pictures help.
Try doing a search on gunbroker to see what model 15's are selling for. Click on revolvers then type 15.
If you sell it to a gun shop, they have to eat too, so your likely gonna get about $275 to $300 for it.
You can also try to advertise it locally.

Good luck,
Jim
laytonj1 is offline  
Old August 3, 2010, 12:55 AM   #3223
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
I've got a Smith 38 special ctg with a US Navy stamp with an ID of V 163216 on barrel and on stock ID of V163216. Anyone know the year made and value?
The serial number dates it to 1942 -1945. It's a Victory model made for military service during WWII.
Value depends on condition and ranges from around $350 in "good", $600 in excellent and $750 in "as new" (2006 values). Per the SCSW, "the US Navy marking adds 50 to 100% if marked on the topstrap (above cylinder) and double to triple the value if marked PROPERTY OF US NAVY below the thumb release. Beware of fake markings"

Jim
laytonj1 is offline  
Old August 3, 2010, 08:04 PM   #3224
Luke1234
Junior Member
 
Join Date: August 3, 2010
Posts: 2
Thank you Jim.
It is stamped US Navy on the topstrap and is in good condition. It is also in I think may be the original shoulder holster. What is the best place to sell a handgun like this? A gun show? Thank you for all of your assistance.

Luke
Luke1234 is offline  
Old August 5, 2010, 10:38 PM   #3225
richbail
Junior Member
 
Join Date: August 5, 2010
Posts: 1
1911 SW

I am new to this and have little or no experience. I bought a SW 1911 through gunbroker and of course i bought a SW after doing the reading. It is used and is at 98% so it has not been used very much. What i was wondering is how to tell when it was made, the serial number is JRD6XXX. It does not change anything 1 way or the other, just wondering.

PS i can wait to go out and shoot this weekend as i have not done so in 40-45 years. Next is trap and i have not done this for 30 years. It is heck to get old.
richbail is offline  
Reply

Tags
s&w 686

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:42 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2024 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.43218 seconds with 9 queries