The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old April 24, 2010, 11:00 AM   #2926
kb3hg
Junior Member
 
Join Date: April 24, 2010
Location: Delaware
Posts: 2
serial number information

I'm trying to find the age information a S&W 64 2 .38 special Serial number is XX1xx
The first 2 Xs are the first numbers, only five digit and the last three are numbers,


Thanks,
Tom

Last edited by kb3hg; April 24, 2010 at 11:44 AM. Reason: ask later about ammo
kb3hg is offline  
Old April 24, 2010, 03:18 PM   #2927
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,731
Tom - ya gotta give us something to work with. It's OK to replace the last couple digits with "x"s, but we need the first part of the SN to find a year for you. Also, 64-2s were made from 1977 to 1988, and the SN will either have a letter "D" in there preceded by one or two numerical digits, or will be of the "modern" type that starts with three letters, followed by 4 digits. No 64s were made with 5-digit (only) SNs. Take the SN from the bottom of the grip frame - other numbers that may be stamped in the frame cutout are not necessarily serial numbers
FlyFish is offline  
Old April 24, 2010, 04:55 PM   #2928
s346k
Junior Member
 
Join Date: April 24, 2010
Posts: 1
hey fellas, i have a couple automatic smiths i am trying to track down a dob for..

1911sc - JRE4xxx

4506-1 - VKM3xxx

thanks in advance.

cool site btw.
s346k is offline  
Old April 25, 2010, 12:44 AM   #2929
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
1911sc - JRE4xxx

4506-1 - VKM3xxx
Serial number data in the SCSW for later model S&W auto pistols is very incomplete. Pretty much nothing on the 1911's. Best I can tell you is the 4506 is between 94 and 99.
If you call S&W customer service they will give you the DOB for both guns over the phone for free.

Jim

S&W
1-800-331-0852 (USA)
Mon-Fri 8:00AM-8:00PM Eastern Time
laytonj1 is offline  
Old April 25, 2010, 01:02 PM   #2930
kb3hg
Junior Member
 
Join Date: April 24, 2010
Location: Delaware
Posts: 2
updated

OK, took the hand grips off on the bottom of the handle had ADL06XX, XX being numbers.
SW 64-2
Thanks,
Tom
kb3hg is offline  
Old April 25, 2010, 02:42 PM   #2931
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,731
Tom - that would make it 1983.
FlyFish is offline  
Old April 27, 2010, 11:29 AM   #2932
kopsy
Junior Member
 
Join Date: March 26, 2010
Posts: 4
Quote:
SCSW doesn't appear to list any SNs starting with "3D" - 1D, 2D, and 4D up to 30D, (and even D3), but no 3D. And there's no gap in the sequence of years listed where "3D" would fit, i.e., the list goes right from 2D99999 (end of 1978) to 4D00001 (start of '79). Mod. 10-8 was introduced in 1977 and replaced by the 10-10 in 1988, if that helps.
FlyFish, While 3D doesn't appear in the manual, the S&W historian said that 3D was just a continuation of 2D. So in 1978 they had a very large production year.
kopsy is offline  
Old May 1, 2010, 05:15 PM   #2933
mrcfh
Junior Member
 
Join Date: May 1, 2010
Posts: 1
38 spl model 37

my father passed away and i was left with his model 37 with a 3 inch barrel. i am wondering if anyone could help me find out the age of it. serial number on bottom of hand grip is 3674xx
mrcfh is offline  
Old May 2, 2010, 01:51 PM   #2934
hsmj
Junior Member
 
Join Date: May 2, 2010
Posts: 4
Old S&W

I've got an old S&W revolver, serial #58530. Can't find anything on it for year it was produced. Anyone know? Thanks. It's an old break top, still shoots straight!
hsmj is offline  
Old May 2, 2010, 03:16 PM   #2935
mopic84
Junior Member
 
Join Date: September 29, 2006
Posts: 2
Pre model 36?

Hello Everyone,

I have a S&W 38 special. I'm trying to find out if it's a pre model 36.The serial number is 90XX.

I have attached three pictures.

Thank you in advance for your time.

Last edited by Glenn E. Meyer; November 30, 2013 at 11:47 AM.
mopic84 is offline  
Old May 2, 2010, 05:34 PM   #2936
b79holmes
Junior Member
 
Join Date: February 10, 2010
Posts: 8
S&W 39-2

I friend of the family is in ill health and may sell of his guns.

He has a S&W 39-2 serial A6372xx.
I only examined it quickly but think it is the alloy frame model. I didn't know what he had or that this model was both alloy & steel versions until I got back home.

Looking for info & it's year?

Thanks,
Bill

Last edited by b79holmes; May 2, 2010 at 05:46 PM.
b79holmes is offline  
Old May 2, 2010, 06:43 PM   #2937
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
my father passed away and i was left with his model 37 with a 3 inch barrel. i am wondering if anyone could help me find out the age of it. serial number on bottom of hand grip is 3674xx
Serial numbers ran from 295000 in 1962 to 786544 in 1969. Your SN of 3674XX is likely 63/64.
Quote:
I've got an old S&W revolver, serial #58530. Can't find anything on it for year it was produced. Anyone know? Thanks. It's an old break top
Need to know caliber and is it a double or single action. Trigger guard or no trigger guard. Hammer or hammerless.
Quote:
I have a S&W 38 special. I'm trying to find out if it's a pre model 36.The serial number is 90XX.
Yes, it's a Chiefs Special (pre model 36) made in 1952.
Quote:
He has a S&W 39-2 serial A6372xx.
I only examined it quickly but think it is the alloy frame model.
1980.
It would be an alloy frame with steel slide. The all steel versions numbered less than a thousand, were 39 no dashes and fell in a narrow serial number range.
39's are excellent and very reliable guns.

Jim
laytonj1 is offline  
Old May 2, 2010, 07:37 PM   #2938
hsmj
Junior Member
 
Join Date: May 2, 2010
Posts: 4
Old S&W

It is a .38 S&W cartridge. DA with a hammer. Any help would be appreciated!
hsmj is offline  
Old May 2, 2010, 07:38 PM   #2939
hsmj
Junior Member
 
Join Date: May 2, 2010
Posts: 4
Old S&W

I have found out that the .32 and .38 break tops are pre-1899 but that is all.
hsmj is offline  
Old May 2, 2010, 07:39 PM   #2940
hsmj
Junior Member
 
Join Date: May 2, 2010
Posts: 4
Old S&W

It does have the trigger guard.
hsmj is offline  
Old May 2, 2010, 07:45 PM   #2941
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
It is a .38 S&W cartridge. DA with a hammer.
And with a serial number of 58530 it would be a .38 Double Action 2nd Model.
Serial numbers ran from 4001 in 1880 to 119000 in 1884.

Jim



Edit to add:
Quote:
I have found out that the .32 and .38 break tops are pre-1899 but that is all.
Actually, the .32 break tops were made up till 1937 and the .38's till 1940.

Last edited by laytonj1; May 2, 2010 at 07:53 PM.
laytonj1 is offline  
Old May 2, 2010, 08:59 PM   #2942
shooter05
Junior Member
 
Join Date: November 25, 2005
Location: Heath, Ohio
Posts: 9
Hi all
I've wanted a S&W revolver forever! I finally have one!
Could I get a little help dating it.
Model 65-2 ser# 1D45XXX
It is marked TPD U74 on the side. I was told it was probably Toledo PD

Thanks in advance
shooter05
shooter05 is offline  
Old May 2, 2010, 09:18 PM   #2943
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
Model 65-2 ser# 1D45XXX
1979.

Jim
laytonj1 is offline  
Old May 3, 2010, 05:49 PM   #2944
Samadams2000
Member
 
Join Date: July 30, 2008
Posts: 21
Smith and Wesson Model M&P Revolver

How about a S&W Model M&P Revolver SN# S 845XXX....? Regards!
Samadams2000 is offline  
Old May 3, 2010, 09:18 PM   #2945
bwc83
Junior Member
 
Join Date: May 3, 2010
Posts: 3
S&W 38 special ctg question, please help

Hello. I am new to the forum. Recently inherited a gun from my grandfather who passed. Would like a little info on it if possible.

It is marked

MARCAS REGISTRADAS ... it isn't a shiny material, wood butt.

Smith and Wesson stamp on the side and all over it.

It is a 6 shooter ... cylinder pops out on the side.

Serial number is - 986XX - 5 digits. It also has a C to the left.

Inside the cylinder where it closes it looks to have a k and a 1299 randomly positioned

When do you all think it was made, what might the approximate value be not that I am going to sell it? Please let me know. Thanks in advance.
bwc83 is offline  
Old May 4, 2010, 02:23 PM   #2946
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
How about a S&W Model M&P Revolver SN# S 845XXX....?
Serial numbers ran from S811120 in 1945 to S999999 in 1948.
Quote:
Smith and Wesson stamp on the side and all over it.

It is a 6 shooter ... cylinder pops out on the side.

Serial number is - 986XX - 5 digits. It also has a C to the left.
Serial numbers ran from C1 in 1948 to C223998 in 1951.
Value depends on condition. Roughly $250 well used to ~$500 like new.

Jim
laytonj1 is offline  
Old May 5, 2010, 09:20 PM   #2947
mike corley
Junior Member
 
Join Date: January 20, 2009
Posts: 2
How about a 686 Serial ALW0742? Just wandered. Thanks.

Mike
mike corley is offline  
Old May 5, 2010, 11:22 PM   #2948
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
How about a 686 Serial ALW07XX?
Serial numbers ran from AHC1687 in Jan. 1986 to AVB in July 1987.
So ALW is likely 1986, maybe 87.

Jim
laytonj1 is offline  
Old May 6, 2010, 12:09 AM   #2949
Czechbikr
Junior Member
 
Join Date: October 19, 2008
Posts: 6
Heirloom 38 S & W 2" Nickel plated revolver

Hi folks,

If I may pick the brains of the Smith & Wesson folks here, I just inherited my first Smith which belonged to my Grandfather. The left side of the 2" barrel is engraved with "Smith & Wesson" and under that has 38 S & W.SPC.CTG On the right side of the frame, below the cylinder is has " Made in U.S.A."


The serial number is 608XXX whis is stamped on the butt strap and also on the end of the cylinder. 24929 is stamped in the inside of the crane. It has the S & W engraved trademark on the frame and on the gutta percha grips. I've attached a couple of photos.. Thanks for any help you can render, it is much appreciated.


UPDATE:

I got a bit impatient and called S & W to see if I could pinpoint a range of years and learned a few things. Any S & W with an "alpha" character in the serial number is post WW II as they becan putting a "V" in the number during that time and kept it going afterward with other alpha characters. The Historian said that my revolver might date from the early 1930's, but that snub nose configurations were rare then ie special order. So the estimate for mine is 1935 plus or minus a few years. I'll probably go ahead and order the "historical letter" to keep with the gun.

Last edited by Glenn E. Meyer; November 30, 2013 at 11:47 AM.
Czechbikr is offline  
Old May 6, 2010, 11:08 AM   #2950
moralem
Junior Member
 
Join Date: July 18, 2009
Location: Texas
Posts: 14
Help me date a model 36

I just got a model 36 with serial number 551721. The factory tells me it is a 1960-61 manufacture. But some of the stuff I am reading here says that can't be. Does anyone know what year of model 36 I have.
moralem is offline  
Reply

Tags
s&w 686

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:13 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2024 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.45867 seconds with 9 queries