|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Search | Today's Posts | Mark Forums Read |
|
Thread Tools | Search this Thread |
September 8, 2018, 12:28 PM | #1 |
Senior Member
Join Date: June 14, 2018
Posts: 619
|
Scope bases Wby Vanguard/Howa 1500
Night Force is make the correct bases. Somebody finally wised up. These are rail style and Midway USA has them in stock. If you dont like full rail mounts on a hunting rifle just cut them into two pieces after you verify where your rings will sit.
|
September 16, 2018, 10:33 PM | #2 |
Senior Member
Join Date: July 1, 2007
Location: texas
Posts: 997
|
I thought Remington 700 bases also fit Howa/Vanguard; should be abundant. What was your problem with others besides Nightforce?
|
September 16, 2018, 10:46 PM | #3 |
Senior Member
Join Date: November 18, 2005
Location: On the Santa Fe Trail
Posts: 8,242
|
Yes, Remington 700 bases fit the Vanguard/Howa 1500 actions. Well at least the two piece bases do, a one piece base for the Howa may not be interchangeable with the M700. I don't think I'll be spending $60 on a one piece base to take a hacksaw to it, when I can easily buy two piece bases.
__________________
NRA Life Member |
September 17, 2018, 06:18 AM | #4 |
Junior member
Join Date: February 2, 2010
Posts: 6,846
|
"a one piece base for the Howa may not be interchangeable with the M700"
Change that to ABSOLUTELY NOT INTERCHANGEABLE. My Cousin showed up here to mount and zero his HOWA 308 last month. He read the part about Rem 700 and HOWA cross fit but not that it's only with two piece bases. His one piece Rem 700 base didn't fit so I had to dismount the scope from one of my under utilized HOWA rifles to scavenge the 2 piece Weaver bases. |
September 18, 2018, 01:37 PM | #5 |
Member
Join Date: September 11, 2018
Posts: 75
|
Go with the DNZ game reaper
Go with the DNZ game reaper. I have them on my Howa Mini-action, 308 1500 and 3 Tikkas. I will never buy another style mount/ring set up (unless these aren't available). A low fits (closely) a 40 mm objective on a 1500 with a sporter barrel.
|
September 19, 2018, 03:54 PM | #6 |
Senior Member
Join Date: October 6, 2014
Posts: 730
|
I love warne bases and rings man they hold tight
|
September 19, 2018, 05:10 PM | #7 |
Senior Member
Join Date: June 15, 2008
Location: Georgia
Posts: 10,805
|
One piece bases are interchangeable on long action Howa/Vanguard rifles and 700's. The short actions are only interchangeable with 2 piece bases.
While the actions are the same length, Remington's loading/ejection port is smaller and the spacing between the holes is a little different.
__________________
"If you're still doing things the same way you were doing them 10 years ago, you're doing it wrong" Winston Churchill |
September 19, 2018, 07:04 PM | #8 |
Member
Join Date: January 5, 2001
Location: N. Calif.
Posts: 53
|
My favorite one piece bases are from Farrell. Superb quality and strength.
https://www.kenfarrell.com/index.php...ory&path=20_42 |
September 19, 2018, 11:08 PM | #9 |
Senior Member
Join Date: October 6, 2014
Posts: 730
|
I stand corrected thank you
|
September 20, 2018, 01:39 PM | #10 |
Senior Member
Join Date: June 14, 2018
Posts: 619
|
The crown at the front of the 700 is slightly taller than the Vanguard. The rear is identical. You might get lucky and have the front mount sit level with the rear but most of the time it will want to slip slightly to one side. The Night Force bases fit perfectly and do not cross reference to a 700. If you want to use 700 bases you still can if you bed them in Devcon and level them to the rifle. You have to leave the screws loose and let it setup for 24 hours then you can tighten them down. I had this same problem with my McMillan. Try finding a set of bases for that and all you'll get is 700 bases.
|
September 20, 2018, 08:09 PM | #11 | |
Senior Member
Join Date: July 1, 2007
Location: texas
Posts: 997
|
Quote:
|
|
September 20, 2018, 10:34 PM | #12 |
Senior Member
Join Date: June 14, 2018
Posts: 619
|
There you go, folks that get their rings and bases from Weatherby don't seem to be having any problems. Be sure to read the package carefully when you get those Leupold bases/rings. If it say's they'll also fit the 700 then send them back.
|
September 20, 2018, 10:44 PM | #13 |
Senior Member
Join Date: December 10, 2014
Posts: 1,965
|
As I posted in another thread, this worked for me.
Nightforce Standard Duty 1-Piece Picatinny-Style Scope Base Howa 1500 and Weatherby Vanguard Matte https://www.midwayusa.com/product/22...vanguard-matte It was a very good fit and has already proven itself. |
September 23, 2018, 08:24 PM | #14 |
Senior Member
Join Date: November 18, 2005
Location: On the Santa Fe Trail
Posts: 8,242
|
The Talley Lightweight mounts I ordered for my daughter's Howa .308 fit wit no issues. They also stated they were for a M700 action as well on the package.
__________________
NRA Life Member |
September 24, 2018, 10:07 PM | #15 |
Member
Join Date: September 11, 2018
Posts: 75
|
Go with the DNZ game reaper
The easiest most secure set up. I have them on 2 Howas, 3 Tikka, 3 savages and a ruger. Always a dream to work with.
Last edited by rms65; September 24, 2018 at 10:52 PM. Reason: Wanted picture to show |
Thread Tools | Search this Thread |
|
|