The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools Search this Thread
Old December 10, 2009, 10:41 AM   #2251
novice1970
Junior Member
 
Join Date: December 7, 2009
Posts: 5
S&W Age

Thanks again Radagast
novice1970 is offline  
Old December 10, 2009, 04:07 PM   #2252
Herbie
Junior Member
 
Join Date: December 9, 2009
Posts: 2
A K-22 / model 17 is chambered in 22LR. If it's a 38 special then it's a K-38 / model 14.
The serial number (K20XXX) dates it to 1948. For that time period the same serial number should also be on the underside of the barrel and back of the cylinder.

Side note: A K-22 / K-38 from early 1948 would likely have a tapered, thin barrel. Is there only 5 digits after the "K" in the SN or 6?

It is a 5 digit serial # K 20XXX
Herbie is offline  
Old December 10, 2009, 06:54 PM   #2253
Jonathank1982
Member
 
Join Date: September 16, 2008
Location: Western NY
Posts: 20
Hello

A friend of mine got a S&W from his father. His dad got it from a policeman in the 1960's and was reportedly "old" back then. I looked in the yoke and there is no model number stamped in it. I checked and the only things stamped are a Y and a 3 and a 2 with a circle around it. It has a pinned nonbull barrel. Sqaure butt grips. Marked .38 s&w special ctg. Honestly it looks like a model 10. Serial number is 4275xx Any guess to the year?
Thanks!

Jonathan
Jonathank1982 is offline  
Old December 10, 2009, 11:43 PM   #2254
Radagast
Senior Member
 
Join Date: July 13, 2001
Posts: 449
Jonathank1982:
Sounds like your friend has a .38 Military & Police Model of 1905 4th change, made between 1921 & 1927. This is the direct ancestor of the Model 10.
Radagast is offline  
Old December 11, 2009, 11:48 AM   #2255
Jonathank1982
Member
 
Join Date: September 16, 2008
Location: Western NY
Posts: 20
Thanks for the info!

Jonathan
Jonathank1982 is offline  
Old December 11, 2009, 10:22 PM   #2256
HARLEY 58
Junior Member
 
Join Date: December 11, 2009
Posts: 2
AGE\PRICE

I have recently bought a Smith and Wesson 22 m.r.f. ctg revolver ,serial # 6k2XXX, model#48-2. Also has L or E 10 stamped above the model#, and also under the hand grips. The reason I say L or E is under the grips it looks like an E??. It was in a group of guns I just happened up on and bought. I am not a real gun guy just took a chance. I have a guy wanting to trade me a brand new in the box P345 ruger for it. Just don't want to give it away. Any help is appreciated. Thanks in advance Rob. If I have asked this in the wrong place please excuse.

Last edited by HARLEY 58; December 11, 2009 at 10:24 PM. Reason: mispelled
HARLEY 58 is offline  
Old December 11, 2009, 11:16 PM   #2257
Radagast
Senior Member
 
Join Date: July 13, 2001
Posts: 449
Harley 58:
Your Model 48-2 K22 Masterpiece Magnum Rimfire was manufactured in 1974, based on the serial number. The problem is that it should be a 48-4 if manufactured that year.
The E10 and other numbers or letters are assembly numbers used to track parts in the factory and are irrelevant once the gun is assembled. Only the model number and serial number have any relevance.

In 2006 the Standard Catalog of S&W gave values of $450 ANIB, $375 Excellent, $300 Very Good, $250 Good, $185 Fair and $100 in Poor condition.

A quick check on Gunbroker.com & gunsamerica.com show P345s for $450 to $480 and Model 48s from $700 to $900 but there are no bids, so these prices are probably high. I would trade it if the Ruger is a gun you actually want, as it will save you transfer and shipping fees. If you are just trading for tradings sake I would keep the S&W as it is uncommon and no longer produced.
Radagast is offline  
Old December 12, 2009, 12:02 AM   #2258
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
The problem is that it should be a 48-4 if manufactured that year.

In 2006 the Standard Catalog of S&W gave values of $450 ANIB, $375 Excellent, $300 Very Good, $250 Good, $185 Fair and $100 in Poor condition.
Just to add a little,
A 48-2 in the same serial range (6Kxxxx) sold on Gunbroker recently. Though not listed as such, apparently the -2's do exist that late.

Checking completed auctions the "sold" prices ranged from a low of $495 to over $800.

HARLEY58,
The model 48 (not beat up) is a collectable and worth more than the Ruger, hence, him offering you a new one in exchange. But, like Radagast said, go for the one you like best.

Jim
laytonj1 is offline  
Old December 12, 2009, 07:57 AM   #2259
Walter57
Junior Member
 
Join Date: December 12, 2009
Posts: 3
S&W 2206 age+info

Recently bought a Smith&Wesson Model 2206 (6" barrel).
Very nice and accurate gun.
Does anyone has more information about this handgun (age, …) or has any experience using it ?
Serial nr.: VAC 09XX
Thanks

Last edited by Glenn E. Meyer; November 30, 2013 at 11:47 AM.
Walter57 is offline  
Old December 12, 2009, 08:25 AM   #2260
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,727
Quote:
Does anyone has more information about this handgun (age, …) or has any experience using it ?
Serial nr.: VAC 09XX
That's a tough one. SCSW lists the "UAM" prefix as 1997, and the "VHN" prefix as 1998, with no further information. I guess you could infer that your pistol dates from those years, but I think it would only be a guess.
FlyFish is offline  
Old December 12, 2009, 09:45 AM   #2261
HARLEY 58
Junior Member
 
Join Date: December 11, 2009
Posts: 2
22

Thanks for the info. I am at work now and will check again on the 4 or 2 numbers. If I understand right if it is either one the year and price really does not change . Again thanks, and I think I will just keep the S&W. Also the gun is in perfect shape.

Last edited by HARLEY 58; December 12, 2009 at 09:49 AM. Reason: ADD
HARLEY 58 is offline  
Old December 12, 2009, 12:50 PM   #2262
CraCZ
Member
 
Join Date: August 11, 2006
Location: tucson
Posts: 56
Radagast-A friend just purchased a S&W 19-3 2" with a serial #5K72xxx. Would you please tell me the DOB. It would be greatly appreciated-Thanx
CraCZ is offline  
Old December 12, 2009, 01:26 PM   #2263
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,727
CraCZ: I'm not Radagast, but as we're all working from the same book . . . 1973.
FlyFish is offline  
Old December 12, 2009, 06:16 PM   #2264
syclone01
Junior Member
 
Join Date: December 12, 2009
Posts: 4
Year of this model 67

serial# 3K60376 combat masterpiece .38spl. Thanks

also model 66-1 combat magnum serial#89K3649

Last edited by syclone01; December 12, 2009 at 06:27 PM.
syclone01 is offline  
Old December 12, 2009, 08:00 PM   #2265
Jake Chandler
Junior Member
 
Join Date: December 12, 2009
Posts: 4
Help with DOB S&W

I'm fortunate to have found this forum. I would like to know what kind of S&W revolver I have and what year if possible.
It has a four inch barrel, double action, fixed sights, swing out ejector cylinder, no safety that I can see.

Right side of barrel stamped Smith & Wesson Springfield Mass USA. Last pat'd year Sept. 14-09 there is one Maltese cross at the beginning and at the end of the stamping.

Left side of barrel starts with a engraving mark than 38 S&W special CTG and again the engraving mark.

I found the serial number after taking off the grips on the bottom of the frame the first three numbers are 227, a matching number was located on the underside of the barrel visible when you slide the cylinder away only there is a letter B about one 1/4 inch in front of the number.

After examining the frame where the nipples are to align the grips there is a letter E and above that is I believe a #8. Also this is a round butt five screw revolver.

Any ideas or suggestions would be appreciated.
Thank you
Jake in AZ

Last edited by Jake Chandler; December 13, 2009 at 04:33 PM. Reason: add more info
Jake Chandler is offline  
Old December 12, 2009, 10:06 PM   #2266
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,727
Quote:
serial# 3k60376 combat masterpiece .38spl.
1972

Quote:
also model 66-1 combat magnum serial#89k3649
1980
FlyFish is offline  
Old December 12, 2009, 10:40 PM   #2267
joelsteinbach
Junior Member
 
Join Date: December 12, 2009
Location: Chattanooga TN
Posts: 5
S & W

Purchased today S & W 15-3 Great Shape Serial # 3K40963 was wondering the manufacture date, and can the front sight be changed?
joelsteinbach is offline  
Old December 13, 2009, 09:41 AM   #2268
FlyFish
Senior Member
 
Join Date: January 20, 2009
Location: Overlooking the Baker River Valley
Posts: 1,727
joelsteinbach: 1972. With the right gunsmith and sufficient $ you can do just about anything, but it may not be cost-effective. What type of change are you looking to make?
FlyFish is offline  
Old December 13, 2009, 11:00 AM   #2269
syclone01
Junior Member
 
Join Date: December 12, 2009
Posts: 4
thanks

thanks flyfish!! Merry Christmas
syclone01 is offline  
Old December 13, 2009, 12:39 PM   #2270
joelsteinbach
Junior Member
 
Join Date: December 12, 2009
Location: Chattanooga TN
Posts: 5
I would like to add a bright (tru glo) front sight, It appearts that the front blade may be just forced, or friction fit. I shoot 148 HBWC and can only properly use them with a 38 spec. If I use this round in any of my 357's it tends to affect the fuction of the weapon after 30 or 40 rounds.
joelsteinbach is offline  
Old December 13, 2009, 11:40 PM   #2271
Christobal65
Junior Member
 
Join Date: December 13, 2009
Posts: 3
I'm looking for some info on a .22 7 round revolver my dad got from his dad. I have S&W markings on the top of the barrel "Smith & Wesson Springfield MA" with a patent number under it. On the side of the barrel it says 22 S&W CTG and on the base the serial number looks to be 3272.
Christobal65 is offline  
Old December 14, 2009, 12:12 AM   #2272
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
I would like to add a bright (tru glo) front sight, It appearts that the front blade may be just forced, or friction fit.
The front sight blades on later S&W's (like yours) are either pinned or forged as a one piece part of the barrel. If one piece a gunsmith would have to cut off the blade and mill a slot into the base and fit/pin a new blade in.
Quote:
I'm looking for some info on a .22 7 round revolver my dad got from his dad. I have S&W markings on the top of the barrel "Smith & Wesson Springfield MA" with a patent number under it. On the side of the barrel it says 22 S&W CTG and on the base the serial number looks to be 3272.
Is it a tip-up barrel with a spur trigger (no trigger guard)? What are the patent dates?

Jim
laytonj1 is offline  
Old December 14, 2009, 12:19 AM   #2273
Rocked
Senior Member
 
Join Date: September 26, 2006
Location: North Florida
Posts: 152
How about a blued M29-3 numbered AFU69XX?
Rocked is offline  
Old December 14, 2009, 12:23 AM   #2274
laytonj1
Senior Member
 
Join Date: June 1, 2005
Posts: 4,443
Quote:
How about a blued M29-3 numbered AFU69XX?
Late 1984/early 85.

Jim
laytonj1 is offline  
Old December 14, 2009, 12:54 AM   #2275
Christobal65
Junior Member
 
Join Date: December 13, 2009
Posts: 3
Jim it looks exactly like this except it looks like a blue finish.



Patent dates look like Aug 14, 1900 and Oct 1901
Christobal65 is offline  
Reply

Tags
s&w 686

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:28 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2024 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Page generated in 0.55402 seconds with 9 queries