Smith and Wesson serial number search - Page 276

J A · March 22, 2015, 06:02 AM

The 10-7 looks like a 1977 gun. I could not find the 3D prefix listed. But the 10-7 was a 1977 introduction. The 10-8 was also introduced in 1977. Just guessing as the SCSW book is not real clear. JA

imabmwnut · March 22, 2015, 07:38 AM

J A Thats what I noticed. It went from 2D to 4 D.

J A · March 22, 2015, 01:51 PM

The 10-7 and 10-8 were made and sold at the same time. The difference is one is a pencil barrel and the other is a heavy barrel. The -7 and -8 were apparently made between 1977 and 1988. I cold not find any dates for the D3 serial number. But here is the link that I found.
http://smith-wessonforum.com/s-w-rev...-question.html
I hope it helps. JA

BingoFuel · March 25, 2015, 12:22 AM

Hello,
I'm trying to learn more about the following S/N: RSR70xx
The model and SKU, year of manufacture, the dash-version, and any other pertinent info.
Thx,
B

J A · March 27, 2015, 03:12 PM

We need more information to identify your gun. We need the caliber and finish (blue or stainless). Then open the cylinder and you will see the model number and dash number is stamped on the frame.
With this info we should be able to give you a ship date and maybe other info. JA

JSchreen · March 30, 2015, 10:43 PM

I apologies if I break any rules, I'm new to this site. I have this SW .38 Airweight and we are trying to learn more about it. Serial# 289XXX there is no Alpha lettering on it associating with a serial number. Pearl/Ivory or plastic grips, I honestly don't know. I attempted to load photos but they exceed the size limit and I'm doing this from my phone.

JSchreen · March 30, 2015, 11:29 PM

laytonj1 · April 4, 2015, 06:18 PM

Quote:

Serial# 289XXX

Looks like a model 37. Serial number dates it to 1962. The grips look like plastic but hard to be certain from a picture..

Jim

elfranse · April 5, 2015, 03:13 PM

Hi. I have a revolver with the serialnumber is 74K6655 and wondering how old it is. Is it somebody who can help me?

laytonj1 · April 5, 2015, 08:40 PM

Quote:

serialnumber is 74K6655

1980.
Serial numbers ran from 57K0001 to 91K6800 that year.

Jim

elfranse · April 5, 2015, 11:10 PM

Seriously? The revolver looks really nice and i could not tell thats from 1980....
Thanks Jim

laytonj1 · April 6, 2015, 02:00 PM

Quote:

Seriously? The revolver looks really nice and i could not tell thats from 1980....

It has a pinned barrel which was dropped around 1982. So yeah, it's that old.
That said, it's a 66-1, not -4.

Jim

elfranse · April 6, 2015, 02:43 PM

Of course its 66-1, thanks again Jim

Fireman655 · April 9, 2015, 04:04 PM

I traded for a S&W revolver last night and know almost nothing about revolvers so I'm hoping you all can tell me what I have. Model # 39742. S/N # 4134xx the revolver is nickel finish with swing cylinder S&W logo is on left side of pistol

laytonj1 · April 9, 2015, 04:50 PM

Quote:

Model # 39742. S/N # 4134xx the revolver is nickel finish with swing cylinder S&W logo is on left side of pistol

What caliber? It will be marked on the side of the barrel. I need the exact markings. Is it a 5 shot or 6?

Jim

Fireman655 · April 9, 2015, 04:56 PM

It's 6 shot 38 S&W special ctg on right side of barrel it also has a 5 inch barrel if that helps

laytonj1 · April 9, 2015, 05:16 PM

Quote:

It's 6 shot 38 S&W special ctg on right side of barrel it also has a 5 inch barrel if that helps

Sounds like a .38 Military & Police. Serial number 413xxx would put it in the mid 1920's.

Jim

Fireman655 · April 9, 2015, 05:21 PM

Thx man appreciate the help

BShaver · April 9, 2015, 08:59 PM

Hello,
I am new here and was hoping I could get a little information on a gun that I received. I do not have a Smith and Wesson book like everyone is referring to in the forum. I was wondering if someone could provide me the year it was produced, what the gun was typically used for (police, military, civilian, etc.) and the make and model. Thank you all so much in advance, and I hope to hear from someone soon.

Gun: Smith and Wesson "Lemon Squeezer"
Caliber: .38 S&W Short
Serial Number: 117XXX

glockman19 · April 11, 2015, 02:11 PM

Jim,

Could you please tell me the of a 686-4 #BRS6125

My best guess is 1995 between August and October...am I correct?

Thank you

laytonj1 · April 12, 2015, 09:11 PM

Quote:

Gun: Smith and Wesson "Lemon Squeezer"
Caliber: .38 S&W Short
Serial Number: 117XXX

Sounds like a .38 Safety Hammerless 4th Model.
Serial numbers ran from 116003 in 1898 to 220000 in 1907.
These were commercially offered guns.
The chambering is .38 S&W.

Quote:

Could you please tell me the of a 686-4 #BRS6125
My best guess is 1995 between August and October...am I correct?

That's a better guess than I can give you. Book shows prefix BRF to CAM running from August 1994 to Jan 1996.

Jim

timgd · April 13, 2015, 02:38 PM

Looking for DOB for a .32 regulation police sn3679xx s
Thanks

laytonj1 · April 14, 2015, 04:56 PM

Quote:

Looking for DOB for a .32 regulation police sn3679xx

Early 1920's.

Jim

timgd · April 15, 2015, 12:42 AM

Thanks, a little older than I thought.
Tim

Suncoast · April 21, 2015, 10:09 PM

Evening all

I have a S&W M&P 38. Round butt with hard rubber grips. 5" barrel and fixed sights

Serial Number is 5799XX

I have the Standard Catalog on order butt Books a Million is taking their time.

A DOB would be much appreciated

March 22, 2015, 06:02 AM	#6876
J A Senior Member Join Date: March 1, 2009 Location: The Hawkeye State Posts: 191	imabmwnut The 10-7 looks like a 1977 gun. I could not find the 3D prefix listed. But the 10-7 was a 1977 introduction. The 10-8 was also introduced in 1977. Just guessing as the SCSW book is not real clear. JA

March 22, 2015, 01:51 PM	#6878
J A Senior Member Join Date: March 1, 2009 Location: The Hawkeye State Posts: 191	Did a little research on another forum. The 10-7 and 10-8 were made and sold at the same time. The difference is one is a pencil barrel and the other is a heavy barrel. The -7 and -8 were apparently made between 1977 and 1988. I cold not find any dates for the D3 serial number. But here is the link that I found. http://smith-wessonforum.com/s-w-rev...-question.html I hope it helps. JA

March 27, 2015, 03:12 PM	#6880
J A Senior Member Join Date: March 1, 2009 Location: The Hawkeye State Posts: 191	BingoFuel We need more information to identify your gun. We need the caliber and finish (blue or stainless). Then open the cylinder and you will see the model number and dash number is stamped on the frame. With this info we should be able to give you a ship date and maybe other info. JA

March 30, 2015, 10:43 PM	#6881
JSchreen Junior Member Join Date: March 30, 2015 Posts: 2	S&W .38spcl Airweight I apologies if I break any rules, I'm new to this site. I have this SW .38 Airweight and we are trying to learn more about it. Serial# 289XXX there is no Alpha lettering on it associating with a serial number. Pearl/Ivory or plastic grips, I honestly don't know. I attempted to load photos but they exceed the size limit and I'm doing this from my phone.

April 5, 2015, 03:13 PM	#6884
elfranse Junior Member Join Date: April 4, 2015 Posts: 3	S&W 66-4 Hi. I have a revolver with the serialnumber is 74K6655 and wondering how old it is. Is it somebody who can help me?

March 22, 2015, 07:38 AM	#6877
imabmwnut Member Join Date: February 15, 2013 Posts: 65	J A Thats what I noticed. It went from 2D to 4 D.

March 25, 2015, 12:22 AM	#6879
BingoFuel Member Join Date: July 25, 2013 Posts: 99	Hello, I'm trying to learn more about the following S/N: RSR70xx The model and SKU, year of manufacture, the dash-version, and any other pertinent info. Thx, B

March 30, 2015, 11:29 PM	#6882
JSchreen Junior Member Join Date: March 30, 2015 Posts: 2

April 6, 2015, 02:43 PM	#6888
elfranse Junior Member Join Date: April 4, 2015 Posts: 3	S&W 66-1 Of course its 66-1, thanks again Jim

April 9, 2015, 04:04 PM	#6889
Fireman655 Junior Member Join Date: April 9, 2015 Posts: 3	I traded for a S&W revolver last night and know almost nothing about revolvers so I'm hoping you all can tell me what I have. Model # 39742. S/N # 4134xx the revolver is nickel finish with swing cylinder S&W logo is on left side of pistol

April 9, 2015, 04:56 PM	#6891
Fireman655 Junior Member Join Date: April 9, 2015 Posts: 3	It's 6 shot 38 S&W special ctg on right side of barrel it also has a 5 inch barrel if that helps Last edited by Fireman655; April 9, 2015 at 05:01 PM.

April 9, 2015, 05:21 PM	#6893
Fireman655 Junior Member Join Date: April 9, 2015 Posts: 3	Thx man appreciate the help

April 9, 2015, 08:59 PM	#6894
BShaver Junior Member Join Date: April 9, 2015 Posts: 3	Smith and Wesson "Lemon Squeezer" Information Hello, I am new here and was hoping I could get a little information on a gun that I received. I do not have a Smith and Wesson book like everyone is referring to in the forum. I was wondering if someone could provide me the year it was produced, what the gun was typically used for (police, military, civilian, etc.) and the make and model. Thank you all so much in advance, and I hope to hear from someone soon. Gun: Smith and Wesson "Lemon Squeezer" Caliber: .38 S&W Short Serial Number: 117XXX Last edited by BShaver; April 9, 2015 at 09:10 PM.

April 11, 2015, 02:11 PM	#6895
glockman19 Senior Member Join Date: May 30, 2007 Posts: 235	686-4 Jim, Could you please tell me the of a 686-4 #BRS6125 My best guess is 1995 between August and October...am I correct? Thank you

April 13, 2015, 02:38 PM	#6897
timgd Member Join Date: July 14, 2008 Location: SF bay area Posts: 85	s&w age Looking for DOB for a .32 regulation police sn3679xx s Thanks

April 15, 2015, 12:42 AM	#6899
timgd Member Join Date: July 14, 2008 Location: SF bay area Posts: 85	DOB Thanks, a little older than I thought. Tim

April 21, 2015, 10:09 PM	#6900
Suncoast Junior Member Join Date: February 6, 2009 Posts: 1	Evening all I have a S&W M&P 38. Round butt with hard rubber grips. 5" barrel and fixed sights Serial Number is 5799XX I have the Standard Catalog on order butt Books a Million is taking their time. A DOB would be much appreciated

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search