May 16, 2015, 04:41 PM | #1 |
Senior Member
Join Date: April 20, 2009
Location: Helena, AL
Posts: 4,424
|
New Oehler Model 35
My old Oehler 33 expired after almost 30 years, so I ordered the new 35.
|
May 16, 2015, 06:21 PM | #2 |
Senior Member
Join Date: April 8, 2000
Posts: 2,101
|
Please post up a review on it once it arrives, I have been considering one for years but just keep using the ol Chrony, and buying powder and bullets with the extra cash instead of the 35.
__________________
LAter, Mike / TX |
May 16, 2015, 09:31 PM | #3 |
Senior Member
Join Date: November 6, 2001
Posts: 1,125
|
Curious as to what happened to your old Oehler 35? I have an Oehler 35P that I've had since the 80's. It quit reading velocities and acting strange. Called Oehler and they said clean the plugs on the skyscreens with a piece of leather or course cloth. Nothing abrasive. I polished the plugs and cleaned with electronic cleaner and it works perfectly again. They said over long periods of time the metal of the plug ins oxidize a little and cleaning off the oxidation that you can't even see, will fix the issues I was having.
Sorry I just reread your post and you said Oehler 33 instead of 35. |
May 17, 2015, 12:20 PM | #4 |
Senior Member
Join Date: July 6, 2000
Location: BLACK HILLS
Posts: 1,322
|
HAVE one of each, 33 and 35P, and both are going strong since I got the first, the 33, in 1983. The 35P was obtained a bit later to also obtain downange ballistics simultaneously.
And so it goes... PS: My first was a model 10. WHO remembers those ?? |
May 20, 2015, 07:07 PM | #5 |
Junior member
Join Date: February 13, 2014
Location: Flathead Valley, MT
Posts: 2,187
|
Anyone use the the 35P with the 2' rod (just two screens), rather than the 4' rod (3 screens with two readings)?
I only have the 2' rod and two screens (no verification 2nd reading), and it sucks - very crazy readouts. Have to ignore/ discard most. Need the longer pole and additional screen. Where can I order this? Thanks. |
May 20, 2015, 09:04 PM | #6 |
Senior Member
Join Date: April 20, 2009
Location: Helena, AL
Posts: 4,424
|
Screen Spacing
My old 33 has a manual setting inside the cover to specify the spacing. I've used a 6' and a 4' successfully. You'll be amazed at how helpful the Oehler folks are.
|
May 21, 2015, 04:58 AM | #7 | |
Senior Member
Join Date: June 17, 2010
Location: Virginia
Posts: 6,894
|
Quote:
I'm not surprised it's giving you trouble/ Get the third screen directly from Oehler: http://www.oehler-research.com/cgi-b...action&key=SS3 and plug it into the middle channel. I've been running a 2-foot bar/single swivel-head photo tripod for a dozen years. Totally reliable/simple to set up each time/ -everything [including tripod] goes into a single guncase that I bought after the original cardboard shipping box got worn to a frazzle. Last edited by mehavey; May 21, 2015 at 05:03 AM. |
|
|
|